Citizen PPU-700 Download Drivers

Available 7 files for PPU-700
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Explanation Maintenance
Size Driver
89Kb
File Name
ct-s300maintenance.pdf
Information
How to use CT-S300Maintenance.exe
1. Preparation
Please check if following files are in the same folder
CT-S300Maintenance.exe
CT-S300Maintenance.ini
WinIO.DLL
WinIO.SYS
WinIO.VXD
(Do not change any setting in “CT-S300Maintenance.ini” file
2. Choosing Interface
Run “CT-S300Maintenance.exe” file.
Choose interface
In case of Serial Interface, set the communication condition according to the setting of printer.
Then press “Next”.
3. Firmware Loading
Usually, you do not need to use this function.
Please use it only when it is really necessary.
Set DIP switch for 2-OFF/3-OFF/4-OFF/5-OFF/6-ON/7-ON.
Make the printer go into Firmware Loading mode.
Open Paper cover.
Make the cutter blade out by rotating Cutter Motor Lock Release Screw
Power on while pressing LF switch.
Press LF switch twice.
Choose firmware file by pressing Browse button.
Press Send button
When loading is finished, turn off/on the printer.
If you load the firmware, NV bit iamge is erased.
Memory switch setting and customize values may be erased depending on the version of
firmware.
4. Customization
4.1 Customization mode
To use the function after this page, you need to make the printer go into Customization mode
as per following steps.
Open Paper cover.
Power on while pressing LF switch.
Press LF switch once.
There are 3 buttons for this function and each buttons works as follows.
Send Changed setting is sent to the printer. But new setting is not effective until pressing
“Write” button.
Receive By pressing this button, current setting information can be sent from printer to this
software and the values on this software is changed accordingly.
Write If this button is not pressed, new setting is not effective.
4.2 Memory Switch Setting
Choose the button of memory switch to make it ON.
Please refer to the last page of this document.
4.3 Interface setting
If DIP switch 1 is OFF, this setting can be effective.
After changed condition is written to printer, this software will not communicate with printer
properly.
4.4 Mechanism Setting
Print Density: Please adjust the density if printing results is light or too dark.
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Explanation Serial Number Writer
Size Driver
40Kb
File Name
serialnumberwriter.pdf
Information
Utility software to write serial number
The utility software is for writing serial number to printers in order to identify each printer.
Press “Set S/No.” to write the serial
number in the window.
“Get S/No.” shows the written
information through the interface if the
interface allows two-way communication.
The number is incremented every time
when the serial number is written, if Auto
Inc. is shown.
If (Auto Inc.) is not shown, auto
increment function is not active. You need
to press “ Inc.” to increase the number.
From the menu “Set” => “Identification Configuration”, you can see a below window
Number of columns to use for
the identification is fixed at 10.
First Identification Mode:
Enter the format of data to
write to printer in accordance with the following two conditions below.
The format consists of “Characters” (like Printer) + “Numbers” (like 001) and the “Numbers” will be
incremented.
(“Character” part can be number as well.)
Start columns of Number:
Start columns of Number implies the digit number starting figures. (Count from the left).
For example, if this is 10, only last digit can be incremented.
IF this is 9, last 2 digits can be used for the number increment.
Number Length:
Number Length specifies the digit of the “Numbers” part
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Maintenance
Version Driver
1.0.0.1
Size Driver
160Kb
File Name
setupppu700mtn.exe
Information
This is for firmware loading etc.
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
This software is to write unique ID
Operating Systems
Serial Number Writer
Version Driver
0.90.00
Size Driver
1.2Mb
File Name
setupsnowrt.exe
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Utility
Version Driver
Ver.2.05.03
Size Driver
5Mb
File Name
setupcsjprncs-e.zip
Information
This allows you to adjust the various software switches (printer settings) by a easy-to-use utility from your PC.
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Windows 2000-XP-2003-Vista
Version Driver
1.582a
Size Driver
19Mb
File Name
pos1582ae.zip
Information
1. Operating system
Citizen Systems drivers are designed to work on any of following operating systems.
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003 (The functions in terminal mode are limited.)
Microsoft Windows Vista
2. Supported printer models and interfaces
[Note]
* CD-S500/501/503 have emulation mode for CBM, Star and ESC/POS. The driver for the model is for ESC/POS mode.
* CD-S501 and CD-S500 use same driver.
* Japanese driver is available separately.
Supported interfaces are
Serial interface
Parallel interface
USB
Ethernet
(Please note that driver installation procedure in this document does not cover the steps for Ethernet.)
Caution
USB Virtual com driver
If you use CT-S280/PMU2xxx/BD2-222x USB interface model or CT-S2000/4000/310/281/PMU2xxxII with setting for V-COM, USB drivers need to be installed before Windows driver installation.. Please refer to the separate manual for USB driver.
Status function
For the driver with the status function (language monitor) to get the changed status of printer, another document is available. Please refer to the document for the function..
Because the driver with status function could make the printing software unstable, if you do not have any demand to use status function, please use the standard driver.
3. Installing the driver
These instructions use Windows XP as the example operating system. Windows 2000 and Windows Server 2003 are similar. Significant differences are noted.
This explanation is for first time installation. For the installation after second time, there could be more steps or the screen can be different.
The file for the driver is ZIP file. Please extract the file first.
4. DIP/Memory switch setting of printer and port settings of Windows
The printer drivers are designed to work with the factory default settings for the printer.
To set the printer to the factory default settings please check the printer’s users manual.
If you are having trouble with a serial port printer (RS-232) please refer to appendix A.
5. Using the printer
5.1 Printer User Interface
Follow the steps bellow to access the custom part of the user interface for the printers:
Select the printer properties for the printer driver by right clicking on the printer icon.
6. Printer fonts
7. Barcode
8. Graphic printing function
Following printer drivers support graphic printing.
Windows fonts (TrueType fonts) can be printed by these drivers as well.
9. Special functions
To use special function of printer, it is necessary to send specified character in “Control” font or to send specified character in “xx cpi“ font. Both “xx cpi [Euro]”, “xx cpi [Ext.]” font.
Windows font (TrueType font) does not work for the special functions.
Company
Citizen
Categories
Printers
Model
Citizen PPU-700
Description
Drivers
Operating Systems
Windows NT4-2000-XP
Version Driver
3.67b
Size Driver
1Mb
File Name
367b-9xnt2000xp.zip
Information
1. Operating system
CBM drivers are designed to work on any of following operating systems.
Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows ME
Microsoft Windows NT 4.0
Microsoft Windows 2000
Microsoft Windows XP
2. Printer models and drivers.
[Note]
* If your printer has auto cutter and you do not want to use the auto cutter function, please choose
the model name with “No cut” or No cutter model. If you choose the model with cutter function,
it cuts the paper at end of each page. However, cut style depends on the specification of the
cutter.
* IDP3420 / 3421 / 3423, IDP3545 / 3546, IDP3550 / 3551 have emulation mode for CBM, Star and
ESC/POS. We have drivers for CBM mode and drivers for ESC/POS mode.
* Older dot matrix printers do not have connector for cash drawer.
* Drivers for all thermal printers support graphic printing and drivers for impact printers except
“342x ESC/POS mode” do not support graphic printing.
3. DIP switch setting of printer and Port setting of Windows
PRINTER: Please choose bigger size of buffer, if the printer allows you to choose it.
PRINTER: Please choose CR=CR only, if the printer allows you to choose it.
BOTH: Serial communication conditions (Handshake, Baud rate, Data length, Parity) have to
correspond between printer side and Windows side.
BOTH: XON/XOFF is recommended for handshaking.
If you have strange results on serial interface model, please try as follows.
From the property page of printer driver,
Details --> Port Setting --> Advanced
Then disable "use FIFO buffers"
or make Receive Buffer/Transmit Buffer at lowest label.
4. Installing the driver
By executing the downloaded file, the several directories are made for each operating system.
Make sure where drivers for your operating system are located.
When you are requested to choose manufacturer and model for the printer, please click “Have
Disk” button
And specify the directory where you extracted the driver files. Then choose your printer after CBM
printer models are listed.
After the driver installation is finished, printer icon appears in Printer Windows and test page is
printed. If anything is not printed, please check if you choose the correct port. If garbage
characters are printed and you use the serial port, please check if correct baud rate is set.
5. Printer fonts
Following printer fonts can be selected by using Windows driver.
Printing by printer font is much faster than printing by Windows font.
[Note]
* The difference of “xx cpi”, “xx cpi [Euro]” and “xx cpi [Ext.]” is characters/functions assigned
to 80 ~ FF hex.
Special function: Special functions are assigned.
(Refer to section 9 for the special functions. )
Windows Code: Characters from Windows code table are assigned.
No characters: No characters / No functions are assigned.
Converted: Characters from conversion table are assigned.
(Refer to next section for the conversion table.)
Code Page 437: Characters from code page 437 are assigned.
* Standard font and double width font are listed in different font name.
For example, “7.5 cpi” is double width font of “15 cpi”.
* Font size 24 is double high font of font size 12.
* It is necessary to use Black/Red ink ribbon and proper printer to print red characters by “Red”
color font for impact printers.
* It is necessary to use special paper to print Red font for thermal printers.
* If landscape (horizontal) orientation is selected, these fonts will not be printed.
* “Control” font is only for special functions and not for printing.
6. Character conversion table for 80 – FF (hex) characters
This is for “xx cpi”(A0-FF hex) and “xx cpi [Ext.]” (80-FF hex) for the printers except CBM1000 /
CMP10 / CT-S300 / IDP3240 / IDP342x / IDP355x / CBM820 / PPU-700.
7. Barcode
[Note]
* Size of barcode can be selected by choosing font size.
The Barcode size is vertical size. It is calculated as follow:
Printing size (in inches) = Barcode size divide 72
* HRI characters can be added by special functions.
* Each barcode has limitation of characters to use. Please refer to the user’s manual for the details
of limitations.
* These fonts will not be shown correctly.
HelpDrivers Since March 2000