Canon BJC-4200SP Download Drivers

Microsoft Windows XP, Microsoft Windows 2000
Printer Driver Canon BJC-85 Version 1.50
Instructions

=====================================
Introduction
=====================================

Foreword

This Readme gives you important information about setting up and using
the Canon BJC-4200SP printer Driver with which the Readme is distributed. The BJ
Printer Driver allows you to print on your Canon BJC-4200SP printer from
applications running under Microsoft (R) Windows (R) XP or Microsoft (R)
Windows (R) 2000. Before you can use your printer, you must install
the printer driver on your computer.

Installation Components Canon BJC-4200SP

The following components make up the installation package:

- Installer (Setup.exe)
Installs the Canon BJC-4200SP printer Driver on your computer.

- Canon BJC-4200SP printer Driver (referred to as the "printer driver" in this
document)
The software that allows you to print on your printer.

- Uninstaller
Lets you remove the printer driver from your computer.

- Readme (readme.txt)
This document. It contains important information about the printer
driver. To view it after installation, select [Start]-[Programs]-
[BJC-85]-[Readme].

System Requirements

This software requires the following system configuration:

Operating System
Windows XP Home Edition (English)
Windows XP Professional (English)
Windows 2000 Professional (English) or
Windows 2000 Server/Advanced Server (English)

Hardware
Computer: Must operate normally under the operating system used.
(CPU: Intel Pentium microprocessor or equivalent
microprocessor)
Memory: Must operate normally under the operating system used.
Hard drive: At least 25 MB free space prior to installing driver
Other drive: CD-ROM drive
Interface: Parallel, USB or IrDA interface
Printer cable: Bi-directional Centronics cable or USB cable
Display: VGA or better

Canon BJC-4200SP Printer Driver
for Windows Millennium/Windows 98/Windows 95/Windows 3.1
(Version 3.97)
*******************************************************

This printer driver allows you to print documents from
any Windows application to your Canon BJC-4200SP printer.
The driver is designed to function with Windows Millennium,
Windows 98, Windows 95, and Windows 3.1. The correct driver
configuration is automatically installed based on the
version of Windows you are using. Windows Millennium and
Window 98 users should refer to the following information
on Windows 95.

This file describes supplemental information to
help you use your Canon BJC-4200SP printer driver software.
As with most software and hardware products, some
information is made available after the development of
the instruction manual such as "Windows Print Guide".
Updated information regarding your printer is provided
in this .
If you require additional assistance, please contact
your local Canon company.

CONTENTS
*******************************************************
1.0 System Requirements
2.0 For Windows Millennium/98/95 Users
2.1 Specific Information for Windows
Millennium/98/95 Users
2.2 Installing the Canon BJC-4200SP Printer Driver
2.3 UnInstalling the Canon BJC-4200SP Printer Driver
3.0 For Windows 3.1 Users
3.1 Specific Information for Windows 3.1 Users
3.2 Installing the Canon BJC-4200SP Printer Driver
3.3 UnInstalling the Canon BJC-4200SP Printer Driver
4.0 Cautions, Limitations and Restrictions
4.1 During Installation Procedure
4.2 During Printing Procedure

Installing the Printer Driver Canon BJC-4200SP
=====================================
To use this printer driver Canon BJC-4200SP with software application packages that
operate with Microsoft Windows NT, it is important that you follow the
installation procedure as shown below.

Note: It is necessary to log on with full control access privileges for
printer settings to install the printer driver Canon BJC-4200SP successfully.

1. Start Windows NT on your system and log on as a member of the
administrators group or power user group.
2. Click on the [Start] button.
3. Point to [Settings].
4. Click on [Printers] to display the Printers folder.

Note: The icons of the existing printer drivers that are installed in
your system appear in the Printers folder. If an older version of the
printer driver you wish to install appears in the Printers folder,
delete the printer driver. Select the icon of the older version of the
printer driver and click on [Delete] in the [File] menu. Click on the
[Yes] button when the message appears to delete the printer driver.
After deleting the older version of the printer driver, restart Windows
NT.

5. Double-click on the [Add Printer] icon to start the "Add Printer
Wizard".
6. Follow the instructions of the Add Printer Wizard to proceed.
7. Click on the check box next to [LPT1:] or the port you want to use,
when the list of available ports appears. Click on the [Next]
button to proceed.
8. Click on the [Have Disk...] button when the list of manufacturers
and models of the printers appears.
9. Type "c:\canonbj\nt4" and then click on the [OK] button.
10. Select the desired printer you want to install, and click on the [Next]
button.
Depending on your system, if you are upgrading from a previous version
of this printer driver, you must choose [Replace existing driver] after
you select your printer even though Windows NT recommends that you keep
the existing driver. Otherwise the driver will not be upgraded
successfully.
11. Follow the instructions of the Add Printer Wizard until the
installation is finished.
An icon for your printer will then appear in the Printers folder.

CONTENTS
=====================================
1. Overview
2. System Requirements
3. Installing the Printer Driver Canon BJC-4200SP
4. Accessing the Printer Properties Dialogue Box
5. Cautions, Limitations and Restrictions