Exsys EX-6411 Download Manual

Available 1 files for EX-6411
Company
Exsys
Categories
Other Peripherals
Model
Exsys EX-6411
Description
FireWire 1394B PCI card 64-Bit with 2+1 Ports
Operating Systems
Manual
Size Manual
407Kb
File Name
ex-6411.pdf
Info
HARDWARE INSTALLATION :
If you are ready with the jumper settings for the EX-6410 / 6411 , please proceed with the
following installation instructions. Because the designs of computers are different, only
general installation instructions are given. Please refer your computer’s reference manual
whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. If necessary please install now the external power supply to the card like shown at JP1
& J6 above.
4. Locate an available & correct expansion slot ( see compatibility at technical information
above) and remove its covers from the rear panel of your computer.
5. Align the EX-6410 / 6411 with the expansion slot, and then gently but firmly, insert the
card. Make sure the card is seated and oriented correctly.
6. Then connect the card with a screw to the rear panel of the computer.
7. Gently replace your computer’s cover and the mounting screws.

DRIVER INSTALLATION :
Windows ME
The drivers are already integrated in Windows and the EX-6410 / 6411 will be installed
automatically.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at “IEEE1394 Devices“ the following
new entrys: .
If you see this or a similar information the EX-6410 / 6411 is installed correctly.
Windows 2000 XP and Server2003
The drivers are already integrated in Windows and the EX-6410 / 6411 will be installed
automatically.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at “IEEE1394 Devices“ the following
new entrys: .
If you see this or a similar information the EX-6410 / 6411 is installed correctly.
Windows Vista
The drivers are already integrated in Windows and the EX-6410 / 6411 will be installed
automatically.
If you want to use the full performance of the IEEE1394B bus please install Windows
Vista service pack1 it provides the newest IEEE1394B drivers.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at “IEEE1394 Devices“ the following
new entrys: .
If you see this or a similar information the EX-6410 / 6411 is installed correctly.
MAC:
The drivers are already integrated in Windows and the EX-6410 / 6411 will be installed
automatically. Only MacOS 8.6 do need a update before the card can be used. You can
download the update on the MacOS homepage (e.g. FireWire Support 2.8.x)
If you want to use the full performance of the IEEE1394B bus please install MacOS X it
is supplied with new IEEE1394B drivers.
In doubt please refer to the installation manual from your MAC OS version !
LINUX:
Because each individual distribution and kernel version of Linux is different, sadly we
cant provide a installation instruction here. Please refer to the installation manual for
IEEE1394 ports from your Linux version !
HelpDrivers Since March 2000