Exsys EX-6071-L Download Drivers and Manual

HARDWARE INSTALLATION :
Because the designs of computers are different, only general installation instructions are
given. Please refer your computer’s reference manual whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. Locate an available & correct expansion slot ( see compatibility at technical information
above) and remove its covers from the rear panel of your computer.
4. Align the card with the expansion slot, and then gently but firmly, insert the card. Make
sure the card is seated and oriented correctly.
5. Then connect the card with a screw to the rear panel of the computer.
6. Gently replace your computer’s cover and the mounting screws.

DRIVER INSTALLATION :
Windows
After starting Windows it recognizes a new “Controller“ and opens the hardware assistant.
Please choose manual installation and put the driver CD into your CD-Rom drive.
Now enter the Path "D:\LAN\Realtek\RTL8110SC" and then the directory of your
operating system “98SE_ME_2K_XP_XP64“ or “Vista_Vista64“ into the box for the
Path/Source and click at >next/continue<. For Server 2003 please also choose
“98SE_ME_2K_XP_XP64“ and for Server 2008 choose “Vista_Vista64“. Now Windows
searches for the drivers in the specified directory. Follow the hardware assistant
and finish the installation. If Windows recognizes other new devices repeat the above
described steps. If you experience any problems installing the drivers you may also use
the “Setup.exe” from the same folder. Attention! Restart Windows in any case after
installing the drivers.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at “Network“ the following new entry:
.
If you see this or a similar information the card is installed correctly.
MAC:
The drivers are located in the following folder on our driver CD:
"D:\LAN\Realtek\8110SC\MacOS"
Because each individual version of MacOS is different, sadly we cant provide a installation
instruction. Please refer to the installation manual for Ethernet ports from your
MacOS version! In some newer versions the card will even be installed automatically
after starting the OS.
Unix/Linux:
The drivers are located in the following folder on our driver CD:
"D:\LAN\Realtek\8110SC\Unix(LINUX)"
Because each individual version/distribution and kernel version of Unix/Linux is different,
sadly we cant provide a installation instruction. Please refer to the installation manual for
Ethernet ports from your Unix/Linux version! In some newer versions the card will even
be installed automatically after starting the OS.

Name: RTSNT.602

Version: Ver. 5.602.619.2003

Released By: Andy Liao

Release Date: 06/20/2003

Command:
1. RTL8139/810x/c+/8169/8110 all_in_one NDIS4/5/51 drivers first released.
2. For RTL8169s/8110s mass production
3. For RTL8139c+:
During system shutdown, just stop the hardware and ignore the
transmit/receive buffer queue in the memory.

################################################################################

Name: RTSNT.604

Version: Ver. 5.604.718.2003

Released By: Andy Liao

Release Date: 07/22/2003

Command:
1. Fixed nVidia on board VGA share interrupt S3 fail issue
2. Fixed copy huge file fail on nVidia chipset (compatibility issue)
3. Fixed continuous plug/unplug with Marvell Phy PING fail issue

################################################################################

Name: RTSNT.605

Version: Ver. 5.605.804.2003

Released By: Andy Liao

Release Date: 08/06/2003

Command:
For RTL8169/8110:
1. NWay Foolproof Capability, that is to say,
if user force 100Full and 100H/10F/10H could work normally
2. Raise the performance of WinNT4.0 NDSI4 driver
3. Tune the performance of Win2000/XP and make it stable

################################################################################

Name: RTSNT.606

Version: Ver. 5.606.811.2003

Released By: Andy Liao

Release Date: 08/13/2003

Command:

For RTL8139C+:
1. Fixed the Win98 can't connect with WinNT4 by NetBEUI protocol issue
2. To pass the new Microsoft NDIS test version 4.03.0030 (packet filter)

For RTL8169/8110:
1. Fixed the Win98 can't connect with WinNT4 by NetBEUI protocol issue
2. Fixed the miniportReset routine to make it compatible with our
Windows diagnostic program