Exsys EX-11065 Download Drivers and Manual

Available 2 files for EX-11065
Company
Exsys
Categories
Other Peripherals
Model
Exsys EX-11065
Description
LowProfile PCI-Express USB 2.0 card, 3+1 Ports (NEC)
Operating Systems
Manual
Size Manual
296Kb
File Name
ex-11065.pdf
Info
DESCRIPTION & TECNICAL INFORMATION :
The EX-11064 / 11065 is a plug & play high-speed USB 2.0 expansion card for the PCI
Express Bus. The EX-11064 / 11065 provides 3 external and 2 internal ports. It uses
data transfer rates up to 480Mbit/s. The EX-11064 / 11065 design fully utilize the NEC
chipset, which represents the latest in high speed USB interface technology. In combination
with the fast PCI-Express bus it provides a secure and very high data transfer on
each single port. It supports all PCI-Express slots x1 to x16. It is not possible to change
the address or IRQ settings manually, they will be obtained automatically by the system
(BIOS) and operating system. The EX-11065 is a low profile card for slim line case.

HARDWARE INSTALLATION :
If you use Windows 2000 including service pack 4, or Windows XP including
service pack 1 & 2. Or you already installed the drivers please proceed with the
following instructions for hardware installation.
If you are ready with the jumper settings for the EX-11064 / 11065 , please proceed with
the following installation instructions. Because the designs of computers are different, only
general installation instructions are given. Please refer your computer’s reference manual
whenever in doubt.
1. Turn off the power to your computer and any other connected peripherals.
2. Remove the mounting screws located at the rear and/or sides panels of your Computer
and gently slide the cover off.
3. If your pc case do have a front panel please follow the instructions at J7 above.
Normally the cables should be marked if not please ask the front panel manufacturer
4. If necessary please install now the external power supply to the card like shown at JP1
& J6 above.
5. Locate an available PCI-Express expansion slot and remove its covers from the rear
panel of your computer.
6. Align the EX-11064 / 11065 with the expansion slot, and then gently but firmly, insert
the card. Make sure the card is seated and oriented correctly.
7. Then connect the card with a screw to the rear panel of the computer.
8. Gently replace your computer’s cover and the mounting screws.

DRIVER INSTALLATION :
Windows 98 and ME
Please insert the driver CD into your CD-rom drive (for example D:\ ) and open the
folder D:\USB 2.0\NEC\WIN9.x on the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be recognized automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entrys: Root Hub Device> .
If you see this or a similar information the EX-11064 / 11065 is installed correctly.
Windows 2000 and 2000 Server
Should you use Windows 2000 with service pack 4 you dont need any drivers. The
drivers are already integrated in Windows and the EX-11064/11065 will be installed
automatically.
Should you use Windows 2000 without service pack 4 please insert the driver CD into
your CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on
the CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be recognized automatically by your system.
CHECK INSTALLED DRIVER:
Open the >Device manager< . Now you should see at „USB Devices“ the following new
entrys: Root Hub Device> .
If you see this or a similar information the EX-11064 / 11065 is installed correctly.
Windows XP and Server 2003
Should you use Windows XP with service pack 1 or 2 you don't need any drivers. The
drivers are already integrated in Windows and the EX-11064/11065 will be installed
automatically.
Should you use Windows XP without service pack please insert the driver CD into your
CD-Rom drive (for example D:\ ) and open the folder D:\USB 2.0\NEC\WIN9.x on the
CD.
Now start the file “U2v2_1.exe“ by double click on your mouse and follow the setup
program to finish installation process. After that shut down windows and follow the
instructions for the Hardware installation. After installing the card simply start your
computer and the card will be recognized automatically by your system.
Company
Exsys
Categories
Other Peripherals
Model
Exsys EX-11065
Description
LowProfile PCI-Express USB 2.0 card, 3+1 Ports (NEC)
Operating Systems
Windows 98-98Se-Me-2000-XP-2003-Vista
Size Driver
1.9Mb
File Name
ex-11065.zip
HelpDrivers Since March 2000