E-Tech VPAD02 Download Drivers and Firmware

Available 3 files for VPAD02
Company
E-Tech
Categories
Other Peripherals
Model
E-Tech VPAD02
Description
E-Tech Voice over IP Adapter (2x LAN)
Operating Systems
Firmware
Version Firmware
1.54.004
Size Firmware
1.1Mb
File Name
vpad01_02_154004.zip
Info
English: Please see below for the English translation.

Dutch:

Upgradeprocedure voor uw voip-apparaat

1. Log in op de webpagina van uw apparaat met het super-password 19750407
2. Klik onderaan de webpagina op 'Upgrade Firmware'
3. Klik op de knop 'Bladeren' naast 'Firmware File Name'
4. Kies het upgrade bestand. Bijvoorbeeld vpad01_sip_us_123002.bin
(opmerking: standaard wordt uw apparaat geleverd met SIP firmware.)
5. Klik op de knop 'Update Firmware' om te starten.

De update kan ca. 5 minuten duren, gedurende deze tijd is uw apparaat niet
benaderbaar. Onderbreek de upgrade niet en sluit uw webbrowser niet af!

Nadat het bestand in de adapter is gezet, zal de webpagina veranderen, en
een boodschap tonen dat de upgrade geslaagd if mislukt is.

Hierna wordt de firmware worden gecontroleerd door de adapter. Dit kunt u
zien aan het apparaat, de ledjes zullen knipperen ter indicatie. Dit
duurt ca. 2 minuten, gedurende welke u het apparaat NIET mag uitschakelen!

Als de ledjes weer normale activiteit vertonen / de lcd display 'ready for calls'
toont, dan is het apparaat opnieuw gestart. Hierna kunt u via de webpagina controleren
of de upgrade geslaagd is. (het versienummer wordt getoond in de titelbalk.)
-----------------------------------------------------------------------------

English:

Upgradeprocedure for your voip-device

1. Log in to the webpage of your device, using the super-password 19750407
2. Click the 'upgrade firmware' button on the bottom of the page
3. Click the 'Browse' button next to the 'Firmware File Name' field.
4. Select the upgrade file. For example, vpad01_sip_us_123002.bin
(Note: The standard firmware is SIP firmware.)
5. Click the 'Update Firmware' button to start the upgrade.

Updating your device can take up to 5 minutes during which the device is not
reachable. Do not interrupt the upgrade, or close your browser!

After the file has been uploaded to the device, the webpage will change to
indicate success or failure.

The device will then check the file. This is indicated by blinking leds on
the adapter/status bar in the LCD. DO NOT POWER OFF the device during this period!

Once the file is checked ok, the leds will stop blinking, and the device
will boot normally. To check the update, please see the version number shown
in your browser's title bar. It should match the new firmware.
Company
E-Tech
Categories
Other Peripherals
Model
E-Tech VPAD02
Description
E-Tech Voice over IP Adapter (2x LAN)
Operating Systems
Handleiding
Language Driver
Dutch
Version Driver
16-3-2006
Size Driver
131Kb
File Name
vpad01_manual_nl_a4.zip
Info
Korte Nederlandse installatiehandleiding
Dutch quick install guide.
Company
E-Tech
Categories
Other Peripherals
Model
E-Tech VPAD02
Description
E-Tech Voice over IP Adapter (2x LAN)
Operating Systems
Handleiding
Language Driver
English
Version Driver
16-3-2006
Size Driver
626Kb
File Name
vpad01_advanced_us.zip
Info
Software
? DHCP support for automatic assigning IP addresses
? PPPoE support for ADSL or Cable modem
? Set up by HTTP web browser or Telnet
? Upgraded and Configured by FTP(TFTP optional)
? Support major G.7XX ;GSM610 audio codec
? VAD(Voice active detect)
? CNG (Comfort noise generation)
? Dynamic voice jitter buffer
? G.167/165 compliant 16ms acoustics echo cancellation
? Tone generation and Local DTMF re-generation according with ITU-T
? Support the Inband audio; the H245 String; the Q931 Keypad etc
DTMF transmission method
? E.164 dial plan and customized dial rules
? 100 entries for speed dial
? Voice prompt local IP address
? Hotline
? Support adjustable user password and super password

Standard and Protocol
VPAD02 gateway supports following standard and protocol:
? IEEE 802.3 /802.3 u 10 Base T / 100Base TX
? Major G.7XX; GSM610 audio codec
? SIP RFC3261
? TCP/IP: Internet transfer and control protocol
? RTP: Real-time Transport Protocol
? RTCP:Real-time Control Protocol
? VAD/CNG save bandwidth
? DHCP:Dynamic Host Configuration Protocol
? PPPoE:PPP Protocol over Ethernet
? DNS:Domain Name Server
? Telnet:Internet's remote login protocol
? FTP:File Transfer protocol
? TFTP:File Transfer protocol (optional)
? HTTP:Hyper Text Transfer protocol
?? Operating requirements:
? Operation temperature: 0 to 50° C (32° to 122° F)
? Storage temperature: -30° to 65° C (-22° to 149° F)
? Humidity: 10 to 90% no dew

Electric requirements:
? Voltage: 9V DC
? Power: 9W (max.)
? Power adapter: AC/DC input 100-230V,Output 9V 1A
? Network interface:2X RJ-45 Ethernet Connectors
? FXS jack:1XRJ-11 telephone jack
E-Tech VPAD01 / VPAD02
5
? POTS jack:1XRJ-11 PSTN telephone line jack
?? Size:
113x 80 x 28 mm (L x W x H)

Installation:
VPAD02 gateway adopts the standard RJ 45 Ethernet connectors, which
are put in use in cases that Ethernet Jack is used, such as those of users of
LAN, Ethernet, ADSL or Cable Modem.
1. Connect to telephones: Connect the ordinary telephone to the VPAD02
FXS jack with a RJ11 connect cable.
2. Connect to PSTN: Connect the PSTN line to the PSTN jack of VPAD02.
Note: When power off, use ordinary telephones to make or receive a PSTN call to
confirm PSTN line works well.
3. Link to the network: Plug one end of the RJ45 skips cable into the “NET
WORK” marked RJ45 connector by of VPAD02; Link the other end to the
HUB or switch, or RJ45 connector of ADSL or Cable Modem.
4. Link to the PC:Plug one end of the RJ45 skips cable into the “PC” marked
RJ45 connector of VPAD02; Link the other end to the RJ45 connector of
PC NIC.(optional)
5. Power on: plug the power cord adapter into the Power Jack at the back of
the VPAD02. Then plug the o ther end of the power cord adapter into the
appropriate wall outlet.
With the installation done, users can chose HTTP or Telnet orders according
the preference of each, and set the respective parameters. Details may refer
to the related chapters in the manual.
HelpDrivers Since March 2000