Digi SYNC-570i PCI 4P UIB UNIV Download Drivers

Available 4 files for SYNC-570i PCI 4P UIB UNIV
Company
Digi
Categories
Other Peripherals
Model
Digi SYNC-570i PCI 4P UIB UNIV
Description
Drivers
Operating Systems
Windows 2000
Version Driver
5.0.309.0
Size Driver
764Kb
File Name
40002252_m.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Update Driver
6 Additional Notes
6.1 Digi PortAssist Manager
7 History

1. INTRODUCTION
This document describes the device driver that supports
the Digi devices listed below. The driver is for use
with Microsoft Windows 2000, Microsoft Windows XP, or
Microsoft Windows Server 2003.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002253_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003

3. SUPPORTED PRODUCTS

Digi DataFire SYNC 2000 2P Adapter
Digi DataFire SYNC 2000 4P Adapter
Digi DataFire Sync/570i 2P PCI Adapter
Digi DataFire Sync/570i 4P PCI Adapter

4. KNOWN LIMITATIONS

When configuring an adapter using the configuration wizard, if
invalid input is entered and the back button is pressed, an
error message might appear indicating that the input is
invalid. Enter valid input before pressing the back button to
suppress this warning and to back up the wizard.

For PPP links, both sides of a connection must disconnect
before they can be reconnected.

When using the SDLC interface, the maximum BTU (Basic
Transmission Unit) is limited to 521 bytes. This is a known
limitation of the IBM SDLC link service provided in SNA
Server. See the Microsoft SNA article, "Maximum BTU Limit for
Dumb SDLC Interface," for more information.

5. UPDATE DRIVER

You need administrative privileges to update device drivers.
Please be sure you are logged into Windows as Administrator
or as a user that is a member of the Administrators group.

To update an existing AccelePort RAS driver, first perform these
steps:

1. Unzip the driver installation package to a folder of your
choice.
2. Run Dgdscln.cmd to remove previous Inf file versions.
Company
Digi
Categories
Other Peripherals
Model
Digi SYNC-570i PCI 4P UIB UNIV
Description
Drivers
Operating Systems
Windows 2003
Version Driver
5.0.309.0
Size Driver
764Kb
File Name
40002252_m.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Update Driver
6 Additional Notes
6.1 Digi PortAssist Manager
7 History

1. INTRODUCTION
This document describes the device driver that supports
the Digi devices listed below. The driver is for use
with Microsoft Windows 2000, Microsoft Windows XP, or
Microsoft Windows Server 2003.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002253_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003

3. SUPPORTED PRODUCTS

Digi DataFire SYNC 2000 2P Adapter
Digi DataFire SYNC 2000 4P Adapter
Digi DataFire Sync/570i 2P PCI Adapter
Digi DataFire Sync/570i 4P PCI Adapter

4. KNOWN LIMITATIONS

When configuring an adapter using the configuration wizard, if
invalid input is entered and the back button is pressed, an
error message might appear indicating that the input is
invalid. Enter valid input before pressing the back button to
suppress this warning and to back up the wizard.

For PPP links, both sides of a connection must disconnect
before they can be reconnected.

When using the SDLC interface, the maximum BTU (Basic
Transmission Unit) is limited to 521 bytes. This is a known
limitation of the IBM SDLC link service provided in SNA
Server. See the Microsoft SNA article, "Maximum BTU Limit for
Dumb SDLC Interface," for more information.

5. UPDATE DRIVER

You need administrative privileges to update device drivers.
Please be sure you are logged into Windows as Administrator
or as a user that is a member of the Administrators group.

To update an existing AccelePort RAS driver, first perform these
steps:

1. Unzip the driver installation package to a folder of your
choice.
2. Run Dgdscln.cmd to remove previous Inf file versions.
Company
Digi
Categories
Other Peripherals
Model
Digi SYNC-570i PCI 4P UIB UNIV
Description
Drivers
Operating Systems
Windows NT
Version Driver
4.0.229
Size Driver
2.9Mb
File Name
40001974_l.zip
Info
INTRODUCTION

This driver supports all Digi adapters listed below. These adapters
provide connectivity in a Windows NT 4.0 environment and support a
broad range of WAN connections, including serial, V.90 modems,
ISDN (BRI and PRI), Frame Relay, SNA (SDLC, X.25/QLLC), PPP
and X.25 protocols.

SUPPORTED PRODUCTS

AccelePort Xp Family of Adapters:

AccelePort 2p
AccelePort 4p
AccelePort 8p
AccelePort 16p

DataFire RAS PTE Family of Adapters:

DataFire RAS 24 PT1
DataFire RAS 48 PT2
DataFire RAS 30 PE1
DataFire RAS 60 PE2

DataFire RAS B4STU Family of Adapters:

DataFire RAS B4U
DataFire RAS B4ST

DataFire DSP CompactPCI Family of Adapters:

DataFire DSP 24 PT1 CompactPCI
DataFire DSP 48 PT2 CompactPCI
DataFire DSP 30 PE1 CompactPCI
DataFire DSP 60 PE2 CompactPCI

AccelePort RAS Family of Adapters:

AccelePort RAS 4
AccelePort RAS 8

DataFire SYNC 2000 Family of Adapters:

DataFire SYNC 2000 2P PCI
DataFire SYNC 2000 2P+ PCI
DataFire SYNC 2000 4P PCI
DataFire SYNC 2000 4P+ PCI

DataFire SYNC 2000 2P CompactPCI
DataFire SYNC 2000 2P+ CompactPCI
DataFire SYNC 2000 4P CompactPCI
DataFire SYNC 2000 4P+ CompactPCI

DataFire SYNC/570 Family of Adapters:

DataFire SYNC/570-ISA 2P EIA232
DataFire SYNC/570i-ISA 2P EIA232
DataFire SYNC/570i-ISA 2P X.21
DataFire SYNC/570i-ISA 2P V.35
DataFire SYNC/570i-ISA 4P EIA232
DataFire SYNC/570i-ISA 4P V.35
DataFire SYNC/570i-PCI 2P UIB
DataFire SYNC/570i-PCI 4P UIB
DataFire SYNC/570i-56-ISA EIA232 RJ45
DataFire SYNC/570i-56-ISA V.35 RJ45
Company
Digi
Categories
Other Peripherals
Model
Digi SYNC-570i PCI 4P UIB UNIV
Description
Drivers
Operating Systems
Windows XP
Version Driver
5.0.309.0
Size Driver
764Kb
File Name
40002252_m.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Update Driver
6 Additional Notes
6.1 Digi PortAssist Manager
7 History

1. INTRODUCTION
This document describes the device driver that supports
the Digi devices listed below. The driver is for use
with Microsoft Windows 2000, Microsoft Windows XP, or
Microsoft Windows Server 2003.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002253_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003

3. SUPPORTED PRODUCTS

Digi DataFire SYNC 2000 2P Adapter
Digi DataFire SYNC 2000 4P Adapter
Digi DataFire Sync/570i 2P PCI Adapter
Digi DataFire Sync/570i 4P PCI Adapter

4. KNOWN LIMITATIONS

When configuring an adapter using the configuration wizard, if
invalid input is entered and the back button is pressed, an
error message might appear indicating that the input is
invalid. Enter valid input before pressing the back button to
suppress this warning and to back up the wizard.

For PPP links, both sides of a connection must disconnect
before they can be reconnected.

When using the SDLC interface, the maximum BTU (Basic
Transmission Unit) is limited to 521 bytes. This is a known
limitation of the IBM SDLC link service provided in SNA
Server. See the Microsoft SNA article, "Maximum BTU Limit for
Dumb SDLC Interface," for more information.

5. UPDATE DRIVER

You need administrative privileges to update device drivers.
Please be sure you are logged into Windows as Administrator
or as a user that is a member of the Administrators group.

To update an existing AccelePort RAS driver, first perform these
steps:

1. Unzip the driver installation package to a folder of your
choice.
2. Run Dgdscln.cmd to remove previous Inf file versions.
HelpDrivers Since March 2000