Digi PortServer TS 2 Download Drivers

Available 1 files for PortServer TS 2
Company
Digi
Categories
Other Peripherals
Model
Digi PortServer TS 2
Description
Drivers
Operating Systems
Windows NT
Size Driver
729Kb
File Name
40001738_r.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Upgrading RealPort
6 Additional Notes
7 History

1. INTRODUCTION

This document describes the service that supports the
Digi devices listed below. The service is for use
with Microsoft Windows NT 4.0.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40001738_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows NT 4.0, Service Pack 5 or better

3. SUPPORTED PRODUCTS

Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family

4. KNOWN LIMITATIONS

Changing the baud rate of a serial printer requires deleting
the printer device and then re-adding the device with a
different baud rate. This is a Print Manager limitation in
Windows NT 4.0.

If you plan to use the RealPort service with serial
printers, you have to reboot the system after device
installation or after renaming ports to see the new ports
listed in the Print Spooler's list of available ports for
printing. This is a known limitation of the Print Spooler,
which does not detect changes in the list of available ports
automatically.

If you experience problems printing to a serial printer,
navigate to the device's Device Properties dialog in the
Device Manager, enable "Complete Write Requests Immediately,"
and try printing again.
HelpDrivers Since March 2000