Available 3 files for Digi EtherLite 162 EIA422
Select Files
Company
Digi
Categories
Other Peripherals
Model
Digi EtherLite 162 EIA422
Description
Drivers
Operating System
Windows 2000-XP-2003
Size Driver
972KB
File Name
40002164_s.zip
Observations
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Help and Documentation
5 Release History
1. INTRODUCTION
This document contains general information as well as
last minute changes for the Digi RealPort driver and
Setup Wizard.
2. SUPPORTED OPERATING SYSTEMS
Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003
3. SUPPORTED PRODUCTS
Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family
4. HELP AND DOCUMENTATION
Help and Documentation for installing, updating, removing and
configuring Digi RealPort for Windows can be found in the help
file, digirlpt.chm.
digirlpt.chm is part of the same software package as this file.
To view the help file, browse to the directory containing the
software package and double-click on the file, digirlpt.chm.
If a Digi RealPort device is installed, the help file can also
be accessed from the Device Manager, via the device's Multi-port
serial adapters property page.
5. HISTORY
Version 3.2.281.0, 11/17/2005 (Rev. S)
--------------------------------------------
o Added feature to optimize network usage for different
networks -- i.e., wired, wireless, and cellular.
o Added 'examine' command to RealPort Setup Wizard CLI
to simplify driver backup, restoration and deployment.
o Added option to use device MAC or DNS name rather than IP address.
o Added digirlpt.chm context and HTML help.
o Updated 'change' command in RealPort Setup Wizard CLI to
support /id, /likeid, /com, and /likecom switches.
o Fixed RTS toggle to not require CTS to be asserted to send.
o Added feature to coalesce data for legacy applications.
o Corrected processing of SERIAL_NULL_STRIPPING.
o Resolved transmission issue with offline device when
port is configured for Always Grant Port Open Requests.
o Corrected support of XonLimit and XoffLimit.
Company
Digi
Categories
Other Peripherals
Model
Digi EtherLite 162 EIA422
Description
Drivers
Operating System
Windows 98-98Se-Me
Size Driver
169KB
File Name
40002297_e.zip
Observations
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Installing the RealPort Driver
6 Updating the RealPort Driver
7 Additional Notes
8 History
1. INTRODUCTION
This document describes the Digi RealPort Device Driver
for Microsoft Windows 98 and Me.
Refer to the following number when searching the Digi
International Inc. web site (www.digi.com) or the ftp
site (ftp.digi.com) for the latest software package:
40002297_
2. SUPPORTED OPERATING SYSTEMS
Microsoft Windows 98
Microsoft Windows Me
3. SUPPORTED PRODUCTS
Digi Connect Family
Digi EtherLite Family
Digi Flex Family
Digi One Family
Digi PortServer Family
Digi PortServer TS Family
Digi PortServer TS MEI Family
Digi PortServer TS W MEI Family
Digi PortServer TS M MEI Family
Digi PortServer TS H MEI Family
Digi PortServer TS P MEI Family
4. KNOWN LIMITATIONS
After installing a new device in Windows ME, please reboot
your system for the ports to become accessible.
The Device Manager incorrectly reports bogus resources for
each of the RealPort serial ports (see the Ports (COM & LPT)
category of the Device Manager). This is a limitation of the
operating system, which requires that serial ports are
associated with a physical address space, albeit phantom.
If you plan to use the RealPort driver with serial printers,
you may want to reboot the system after device installation or
after renaming ports to see the new ports listed in the Print
Spooler's list of available ports. This is a known limitation
of the Print Spooler, which does not detect changes in the
list of available ports automatically.
If you experience difficulties operating serial printers, try
enabling the option, "Complete write requests immediately."
A checkbox of the same name can be found in the port's Port
Properties dialog in the Device Manager.
5. INSTALLING THE REALPORT DRIVER
To install the driver, follow these steps:
o Close the Device Manager if it is running.
o Unzip the driver archive to a folder of your choice.
o Run DIGIRPCL.BAT to remove any previous INF file versions.
Company
Digi
Categories
Other Peripherals
Model
Digi EtherLite 162 EIA422
Description
Drivers
Operating System
Windows NT
Version
1.018
Size Driver
843KB
File Name
4001899d.exe
Observations
Overview
--------
This driver package supports both SCSI Terminal Servers and EtherLite
Terminal Servers products from Digi International Inc.
Installation Instructions
-------------------------
1. Install your Terminal Server hardware as described in the accompanying
instruction booklet(s).
2. If you have installed no EtherLite units (i.e., you have installed
SCSI Terminal Servers), skip to step 4.
3. Set up an IP-address server on your network (if one is not
present already), and reserve an IP address for each EtherLite
unit. Detailed instructions for doing this can be found under
"Operating an EtherLite Port Server" in the Digi International
Help file (Digielst.HLP in the same directory as this README file).
4. Install and configure the software by running the SETUP.EXE
program in the same directory as this README file.
Release notes for R1.018
------------------------
o Fixed RTS_CONTROL_TOGGLE blue screen crash bug. (Bug ID 4783)
o Fixed port remap tool problem with EL-2 485 devices. (Bug ID 4574)
o Fixed memory leak in non-paged pool. Reverted to the original method of
establishing an initial connection to the device. (Bug ID 3934)
o Included new utility program (storeip.exe) for setting the IP address on
EtherLite units.
Release notes for R1.017
------------------------
o Fixed buffered output capability (Bug ID 4261)
o Any attempt to connect to an inaccessible unit will result in a significant
non-paged pool memory leak over time. The fault appears to lie in a system
routine called during this process. Consequently, to minimize the leak,
initial attempts to connect to a unit and attempts to connect to a unit
which goes offline will timeout after two hours. Also, the interval
between retrying for an initial connection will grow from ten seconds to
two minutes within the first several minutes of driver startup. (Bug ID 3934)
KNOWN BUGS:
o Configuring units which are not physically accessible will precipitate
a memory leak in non-paged pool memory. This memory cannot be reclaimed
without rebooting your system.
o RAS will not work on MP systems.
Release notes for R1.015
------------------------
o Fixed multiple MP bugs in the driver's line discipline code (Bug ID 3024, 3081).
o Fixed RAS dial-out bug (Bug ID 3429).
o Fixed AbortOnError flag handling (Bug ID 3447).
o Changed the service name in the installation pack from 'Port Server' to
'Terminal Server' per request ID 3198.
o Fixed the Digi logo bug in the installation package (Bug ID 2631).
o Replaced remapping utility with working version.
Access to Official Website Digi
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.