Digi ClassicBoard 4 PCI 5V w-PWR Download Drivers

Available 3 files for ClassicBoard 4 PCI 5V w-PWR
Company
Digi
Categories
Other Peripherals
Model
Digi ClassicBoard 4 PCI 5V w-PWR
Description
Drivers
Operating Systems
Windows 2000-XP-2003
Size Driver
915Kb
File Name
40002448_a.zip
Info
1. Introduction
2. Supported Operating Systems
3. Supported Products
4. Additional Notes
5. History

1. INTRODUCTION
This document describes the device drivers that support
the Digi adaptesr listed below. The drivers are for use
with Microsoft Windows 2000, Microsoft Windows XP, or
Microsoft Windows Server 2003.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002248_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows 2000
Microsoft Windows XP
Microsoft Windows Server 2003

3. SUPPORTED PRODUCTS

Digi AccelePort 2p Adapter
Digi AccelePort 4p Adapter
Digi AccelePort 8p Adapter
Digi AccelePort 16p Adapter
Digi AccelePort C/X PCI
Digi AccelePort EPC/X PCI
Digi AccelePort Xem PCI
Digi AccelePort 4r EIA-422 PCI
Digi AccelePort 8r EIA-422 PCI
Digi AccelePort 2r 920 PCI
Digi AccelePort 4r 920 PCI
Digi AccelePort 8r 920 PCI
Digi Neo 2
Digi Neo 4
Digi Neo 8
ClassicBoard PCI 4
ClassicBoard EIA-422 PCI 4
ClassicBoard PCI 8
ClassicBoard EIA-422 PCI 8
Digi Neo 1

Note: The Digi Neo 1 will install two COM ports in
your system. If you connect a standard cable to the
DB25 connector on the adapter, only the first COM
port will be usable. You may upgrade the Digi Neo 1
to a two port adapter by ordering a cable upgrade

4. ADDITIONAL NOTES
On-line help is available when you install the product.

See also, the following readme files for notes specific
to each adapter family:

readme_xp.txt: AccelePort 2p, 4p, 8p, and 16p.
readme_fep5.txt: AccelePort C/X, EPC/X, Xem, and Xr.
readme_neo.txt: Neo and ClassicBoards.
Company
Digi
Categories
Other Peripherals
Model
Digi ClassicBoard 4 PCI 5V w-PWR
Description
Drivers
Operating Systems
Windows 95-98-98Se-Me
Version Driver
1.1.14
Size Driver
128Kb
File Name
40002124_b.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Updating the Driver
6 Additional Notes
7 History

1. INTRODUCTION

This document describes the Digi Neo and ClassicBoard
PCI Device Driver for Microsoft Windows 95, 98, and Me.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002124_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows 95
Microsoft Windows 98
Microsoft Windows Me

3. SUPPORTED PRODUCTS

Model Number of Ports
--------------------------------------
Digi Neo 2
Digi Neo 4
Digi Neo 8
ClassicBoard PCI 4
ClassicBoard PCI 8
ClassicBoard EIA-422 PCI 8

4. KNOWN LIMITATIONS

For certain motherboard chipsets, Windows 95, 98 and Me will
fail to assign the ClassicBoard PCI an IRQ. Consequently,
the card's ports will be inaccessible.

If Windows fails to open any ClassicBoard PCI port after what
appears to be a successful installation, first check that
the ClassicBoard PCI is assigned an IRQ:

1. From the Start menu, choose Settings > Control Panel >
System > Device Manager. View devices by type should
already have been selected by default.
2. Expand the Multi-port Serial Cards category (click on
the plus-in-the-box to expand the list of serial cards).
3. Highlight the ClassicBoard PCI card and choose Properties.
4. Select the Resources tab.
5. Under Resource settings should be an Interrupt Request
Resource type. If you don't see an Interrupt Request
listed, you may need to upgrade the PCI IRQ Routing
Miniport Driver.
Company
Digi
Categories
Other Peripherals
Model
Digi ClassicBoard 4 PCI 5V w-PWR
Description
Drivers
Operating Systems
Windows NT
Size Driver
80Kb
File Name
40002125_g.zip
Info
Section Description
-------------------------------
1 Introduction
2 Supported Operating Systems
3 Supported Products
4 Known Limitations
5 Additional Notes
6 History

1. INTRODUCTION
This document describes the Digi Neo and ClassicBoard
PCI Device Driver for Microsoft Windows NT 4.0.

Refer to the following number when searching the Digi
International Inc. Web site (www.digi.com) or the FTP
site (ftp.digi.com) for the latest software package:

40002125_

2. SUPPORTED OPERATING SYSTEMS

Microsoft Windows NT 4.0

3. SUPPORTED PRODUCTS

Model Number of Ports
--------------------------------------
Digi Neo 2
Digi Neo 4
Digi Neo 8
ClassicBoard PCI 4
ClassicBoard EIA-422 PCI 4
ClassicBoard PCI 8
ClassicBoard EIA-422 PCI 8

4. KNOWN LIMITATIONS

The driver supports ClassicBoard PCI adapters only.
The ClassicBoard ISA adapter is not supported.

AltPin and DTR/DSR flow control are not compatible.

5. ADDITIONAL NOTES

Online help is available when you install the product.

AltPin
------

10-pin RJ-45 plugs may be difficult to obtain in the retail
market; therefore, the device driver software incorporates
a feature called AltPin, which swaps the logical functions
of DSR (Data Set Ready) with DCD (Data Carrier Detect). When
the AltPin box is checked, DCD becomes available on pin 1
of an 8-pin RJ-45 connector (equivalent to pin 2 of a 10-pin
connector).

Force Baud Rate
---------------
With the Force Baud Rate feature, the device driver software
forces the baud rate of a COM port to a fixed value. This
enables older serial communication applications to use baud
rates above the applications configuration limit (e.g. 115200).
If Force Baud Rate is enabled, the driver replaces the
applications baud rate with the forced baud rate value.
HelpDrivers Since March 2000