Chronos MP952CB-P Download Drivers

Available 2 files for MP952CB-P
Company
Chronos
Categories
Other Peripherals
Model
Chronos MP952CB-P
Description
I-O Cards
Operating Systems
MS-DOS
Size Driver
99Kb
File Name
mp952cb-p_dos.zip
Info
Initio INI-9XXXU/UW Device Drivers for DOS
------------------------------------------
1. Overview

Under the Microsoft DOS operating System, the INI-9100U/9100UW host adapter
BIOS will provide the necessary functions to support SCSI hard disks. The BIOS
supports up to two hard disk drives for DOS 4.01 and below. It supports more
than two (up to eight) hard disk drives for DOS 5.0 and above.

You don't have to install a device driver to access the hard disk. However
you need to install ASPI(Advance SCSI Programming Interface) device driver to
support other SCSI devices such as CDROMs, Tape drives, or Scanners.

The Initio INICD.SYS driver is an ASPI compliant SCSI CD-ROM driver for DOS operating system.

The DOSSETUP utility will install the Initio ASPI device driver
(ASPI910U.SYS) for DOS 3.3.1 or later. It will also optionally install the
Initio SCSI CD-ROM device driver(INICD.SYS).

2. Installation Procedures
1. Insert the diskette into your floppy drive.
2. Change to the drive letter that contains the diskette.

(e.g., C:>A:)

3. Type DOSSETUP.

A:>DOSSETUP

3. ASPI Driver(ASPI910U.SYS) Command Line Options

The standard format for command line in the CONFIG.SYS file is:

DEVICE=C:\INIASPI\ASPI910U.SYS [Driver Config Option]

Driver Config Options:

/D Verbose mode provides detail information about driver when
driver is inititalized
/L Drvier scan eight LUNs for each SCSI Target.
/Bx,yy Scan device only on PCI BUS x, DEVICE yy
The range for "x" is from 0 to 7.
The range for "yy" is from 0 to 20.
/Bx Scan all the devices on the PCI BUS x
The range for "x" is from 0 to 7.
/Syy Scan device only on the PCI BUS 0 & Device yy.
The range for "yy" is from 0 to 20.
/CCBSx Defines the maximum number of concurrent I/Os that driver
supports. The range for "x" is from 1 to 16.

3. CD-ROM Driver(INICD.SYS) Command Line Options

The standard format for command line in the CONFIG.SYS file is:

DEVICE=C:\INIASPI\INICD.SYS [Driver Config Option]

Driver Config Options:

/D: Specifies a logical name to the SCSI CD-ROM device driver.

/Xx:y:z Exclude a specific CD-ROM drive(SCSI H/A #x, ID #y, Lun #z)
from being controlled by SCSI CD-ROM driver. When SCSI ID and
LUN are not specified, all devices on the supplied host
adapter number will be excluded.

/T Specifies the timeout after which SCSI CD-ROM Driver returns
an error when the CD-ROM drive is not responding. Valid
timeout values are 1 through 9 minutes. The timeout default
value is 3 minutes.
Company
Chronos
Categories
Other Peripherals
Model
Chronos MP952CB-P
Description
I-O Cards
Operating Systems
Windows 95-98-98Se-Me-NT-2000-XP
Size Driver
261Kb
File Name
mp952cb-p_win.zip
Info
UART/parallel port Reference drivers
Windows 9x/ME drivers
---------------------

Features: Automatic enumeration of all 95x UARTs, both internal and local bus
95x-mode driver for enhanced serial port performance
GUI configuration for all serial ports
Hook to use generic driver for Parallel port
(can disable parallel port interrupt)

Windows 2000/XP drivers
-----------------------

Features: Automatic enumeration of all 95x UARTs
95x-mode driver for enhanced performance
GUI configuration for all serial ports
PCI serial ports run in memory-mapped mode for faster throughput
Parallel port driver
COM port remapping under port properties (Device Manager)
ACPI Power Management support

Windows NT4 drivers
-------------------

Features: Automatic enumeration of 95x UARTs
128-deep FIFO and fill level usage
Optimised interrupt handling, tx FIFO topped up on all interrupts
Registry or .inf-settable Vendor/Device IDs, trigger levels.
Memory-mapped operation for increased throughput.
Seperate parallel port driver and installer

To install the serial port driver, run "Install_Serial" from the \NT4_Serial directory
To install the parallel port driver, run "Install_Parallel" from the \NT4_Parallel directory
FILES IN THIS DIRECTORY
-----------------------

readme This file
oxpci.inf Hook for PCI device and logical functions
oxpci2.inf Hook for child devices (serial ports / parallel port)
oxser.inf Installation file for standalone ports
oxmf.vxd Bus enumerator for UARTs and local bus UARTs (Win9x)
oxmfcf.vxd Bus enumerator for CF950 in local bus mode (Win9x)
oxmf.sys Bus driver for UARTs and local bus UARTs (Win2000/XP)
oxmfuf.sys Filter driver for PCI ports
oxpp.vxd Bus enumerator for parallel port
oxppui.dll Parallel port configuration utility
oxser.vxd Serial port driver (Win9x)
oxser.sys Serial port driver (Win2000/XP)
oxserui.dll Serial port configuration utility (Win9x)
oxui.dll Serial port configuration utility (Win2000/XP)
oxpar_2k.sys Parallel port driver (Win2000) - renamed to oxpar.sys during installation
oxpar_xp.sys Parallel port driver (WinXP) - renamed to oxpar.sys during installation
oxpar.inf Installation file for PCI parallel ports
oxpar2.inf Additional installation file for parallel ports (win9x)
HelpDrivers Since March 2000