Casio EM-500 Download Drivers and Manual

CASIO Camera Card Driver Update File Version 1.01
(For JK-710DC + E-115 or E-105/100)


In the Mobile Camera Application non-updated version, an error sometimes occurs, disabling image recording, when the Snapshot Mode is entered.
Installing this update expands the camera's color compensation tolerance range, which eliminates error generation and allows normal operation.

Note that installation of this update is not required if your camera card is operating normally.

CASIO Update File Version 2.10 (For E-115)


This program is exclusively for use with the CASSIOPEIA E-115. This program makes the corrections listed below.

• E-115 does not connect to some notebook PCs with IrDA on ActiveSync
• Some Game-X Applications can not execute
• Contract API does not work correctly
Please install the update file to fix the problems above.



Installing CASIO Update File Version 2.10

1. Download the following "zip" file and restore.
Connect your Pocket PC and PC before downloading Update File Version 2.10 to your Pocket PC.
2. Double click the Setup.exe and operate PC according to messages.
3. Once installation is completed, reset the Pocket PC by pressing the reset button. If you don't press the reset button, program don't work.
(Memory contents are not erased even if the reset button is pressed.)

CASIO Update File Version 300SER_Eng3.zip
(For EM-500/505+Cradle with RS232C Cable)


There is a problem to connect EM-500/505 to your PC through cradle with RS232C Cable.
Please install this UPDATE FILE-CASIO Update File Version 300SER_Eng3.zip (41KB) and follow the procedure to install the program to your EM-500/505 before starting to use.



Installing CASIO Update File Version 300SER_Eng3.zip
This is only for RS232C cable users. USB users don't need to care this software.

1. Download the above "zip" file.
2. Before installation the file, you need to
i. Remove your EM-500/505 from the cradle
ii. Reset the EM-500/505 (Memory contents are not erased even if reset button is pressed.)
iii. Off the EM-500/505
iv. Put the EM-500/505 to the cradle about 5 to 10 seconds later

3. Install the software

• When you use the EM-500/505 with cradle, make sure to connect the AC adaptor.

• Serial cable connection to PC depends on the models, therefore this isn't guarantee communication through cradle with serial cable to all kinds of PCs.

CASIO Update Pack Version 1.04


Important!
This Update Pack is intended for the CASSIOPEIA models shown below. The Update Pack installer detects the CASSIOPEIA model that is being updated and installs the required update files. Never try to install the Update Pack on any other device or model other than those specifically listed below.

Applicable CASSIOPEIA Models :
EM-500, E-125, E-125G, EM-500G, EM-505F, EM-505I, EM-505S



We recommend that you install the program before using your CASSIOPEIA.

Installing CASIO Update Pack Version 1.04


1. If you already install CASIO Update Pack Version 1.00 or CASIO Update Pack Version 1.01, uninstall it.
* This Update Pack includes the program of Update Pack Version 1.01.
2. Connect your Pocket PC and PC before downloading Update Pack Version 1.04 to your Pocket PC.
3. Double click the Setup.exe and operate PC according to messages.
4. Once installation is completed, reset the Pocket PC by pressing the reset button. If you don't press the reset button, program don't work.
(Memory contents are not erased even if the reset button is pressed.)

The message "On the next mobile device connection, the installed applications will be downloaded to the device." will be displayed, if you install Update Pack Version 1.04 without connecting your Pocket PC and PC.
Tap "OK".
- You need to re-install this program when the memory on Pocket PC is initialized.
You don't need to re-install this program when you only press the reset button.
- The message "CASIO Update Pack Ver 1.04" is already installed.
Do you want to proceed with the re-install/upgrade?" indicates that CASIO Update Pack Version 1.04 is already installed on your Pocket PC.
In this case, we recommend that you cancel the installation, use the "Remove Programs" applet on the Pocket PC /Start/Settings to remove the existing CASIO Update Pack Version 1.04, and then re-install it.




Uninstalling CASIO Update Pack Version 1.04

1. Tap "Start/Settings/Remove Programs" on Pocket PC.
2. Tap "CASIO Update Pack Ver 1.04" and tap "Remove".
3. Tap "Yes" when the message "The selected program will be permanently removed. You may reload it from your desktop computer. Are you sure you want to remove it?" is displayed.
4. Tap "OK".

This is only for RS232C cable users who are having problems connecting their device to the computer.

Fixes the display driver, speeds up writing to SD cards, fixes time counter, updates auto power off, and speeds up display response.