Clevo D410V Notebooks & Tablet PCs > Downloads Drivers and Manual

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

TV tuner Drivers and application

Operating System

Windows 2000-XP

Version

5.0.2.6

Size Driver

162.8MB

File Name

tv_tuner.zip

Observations

System Requirements
-------------------

To use TV STUDIO II, the minimum system requirements are:

1. CPU : Pentium IV 2 Gig or Higher/AMD 2100XP or Higher.
2. Operating System : Windows 2000/XP.
3. Interface : USB2.0.
4. Audio Line-in from Sound Card.
5. AGP 4X Graphic VGA Card.
6. Memory : 256 DDR (Direct DRAM).
7. CD or DVD Burner Required for Recording CDs or DVDs (not included).

------------
CD Contents
------------

1. AVerTV STUDIO II driver for Windows 2000/XP

-------------
Installation
-------------

1.(DO NOT PLUG IN YOUR "AVerTV STUDIO II" DEVICE BEFORE CD INSTALLATION)
Before installing the AVerTV STUDIO II driver and AverTV STUDIO II,
please make sure that your USB 2.0 host controller driver has been successfully
installed. For installing USB 2.0 host controller driver, please refer to "Installing
USB 2.0 Host Controller driver FAQs".

2. Please insert AVerTV STUDIO II installation CD into your CD-ROM, the "Autorun" in the CD will run
automatically into your CD-ROM, the "Autorun" in the CD will run automatically. If the "Autorun" in
the CD is not running, please open the CD from Windows Explorer and double-click
"autorun.exe".

3. Click "Install/Uninstall Driver" to install your driver. The driver setup will first check
whether your USB 2.0 host controller and its driver is ready. If the USB 2.0 host controller
is not ready, the driver setup will not be able to continue. If you are sure that your USB 2.0
host controller and its driver has been installed, please insert your setup CD into your CD-ROM,
click "Browse CD" and access to the "Driver" subdirectory in the CD, and double click "Setup.exe".

4. After you complete the driver installation, you will be directed to plug in your "AVerTV STUDIO II
" device. Then clickon "AverTV STUDIO II" from the "Autorun" menu to install the
application for movie capturing and CD/DVD burning.

5. If you want to remove the driver or the application, please refer to "Driver removal".

----------------
Getting Started
----------------

1. Start "AverTV STUDIO II" either from the Windows desktop or the Start menu.

2. We recommend that first tem users view the self-paced "Tutorial" to get a better understanding of
what you can do with "AverTV STUDIO II".

3. You can record DVD movie to your hard disk or your DVD/CD burning ROM (DVD-RW, DVD+RW,
CD-RW). The burning media can be DVD-R/RW, DVD+R/RW, DVD+RW VR or CD-R/RW.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

WLAN Drivers

Operating System

Windows 2000-XP

Size Driver

25.4MB

File Name

wlan.zip

Observations

Table of Contents
Regulatory Information________________________________________________2
1. Welcome __________________________________________________________4
1.1 Main Features of WLAN USB Module______________________________5
1.2 Wireless Networking Scenarios ____________________________________6
1.3 Advantages for Using Wireless Network ____________________________8
2. Quick Start to Wireless Networking ____________________________________9
2.1 Installation_____________________________________________________9
2.2 Connecting to an Exiting Network ________________________________10
2.3 Additional Note for Windows XP _________________________________ 11
3. Step-by-Step Installation Guide_______________________________________12
3.1 Install the IEEE802.11b WLAN Driver / Utility _____________________13
3.1.1 Additional Setup Processes________________________________16
3.2 Verifying the Driver/Utility ______________________________________17
3.3 IEEE802.11b USB WLAN Utility _________________________________17
3.3.1 Disable Windows XP Zero-Configuration __________________19
3.4 Basic Setting for Infrastructure Mode _____________________________20
3.5 Basic Setting for 802.11Ad Hoc Mode/Ad Hoc Mode _________________21
3.6 Advanced Settings______________________________________________23
3.7 Encryption Function____________________________________________24
3.8 Uninstall the IEEE802.11b USB WLAN Utility / Driver_______________26
4. Using the Utility ___________________________________________________27
4.1 LAN Status Tab________________________________________________27
4.2 Link Information Tab___________________________________________28
4.3 Site Survey Tab ________________________________________________28
4.4 Diagnostic Tab_________________________________________________29
4.5 About Tab ____________________________________________________29
5. Network Application _______________________________________________30
5.1 Surveying the Network Neighborhood _____________________________30

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

Audio Drivers

Operating System

Windows 2000-XP

Version

A3.45

Size Driver

19.1MB

File Name

audio.zip

Observations

Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.43
Installation and Setup

Driver & Application Installation/Removal Procedure For Realtek AC'97 Codec:
=================================================================================

<<< For Win2000/WinME/WinXP (WDM driver)/Win98 Gold(First Edition)/Win98SE >>>

---------------------------------------
Setup Driver/Application at first time:
---------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver/Application:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver/Application:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Drivers and Applications" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.

<<< For WinNT 4.0 (NT4 driver) >>>

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

Internal LAN Drivers

Operating System

Windows 2000-XP

Version

5.605

Size Driver

2MB

File Name

lan.zip

Observations

How to use this RTLSetup Utility
---------------------------------
For Windows ME:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

For Windows 2000/XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

Internal modem Drivers

Operating System

Windows 2000-XP

Version

3.0.4.168

Size Driver

5.2MB

File Name

modem.zip

Observations

To print README.TXT, open it in Windows Write, Microsoft Word,
or another word processor. Then select the entire document
and format the text in 10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

PCMCIA controller Drivers

Operating System

Windows 2000-XP

Version

5.1.2600

Size Driver

183KB

File Name

pcmcia.zip

Observations

ENE CB1410 Cardbus Controller
Software Driver Support Package
V1.00 2002-03-07

This readme.txt shows the procedure to update INF file of the ENE
CB1410 Cardbus Controller for Microsoft Windows XP/2000/ME/98SE.
--------------
For Windows XP
--------------
1. Select "Start" menu.

2. Select "Control Panel"

3. Double click "System" icon.

4. Click the "Hardware" tab in the "System Properties" window.

5. Click the "Device Manager" button.
----------------
For Windows 2000
----------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon.

4. Click the "Hardware" tab in the "System Properties" window.

5. Click the "Device Manager" button.

--------------
For Windows Me
--------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon. If you can not see the "System" icon,
please click "view all Control Panel options".

4. Click the "Device Manager" tab in the "System Properties" window.

5. Double click the "PCMCIA socket" selection.

----------------
For Windows 98SE
----------------
1. Double click "My Computer" icon on the desktop.

2. Double click "Control Panel" icon.

3. Double click "System" icon.

4. Click the "Device Manager" tab in the "System Properties" window.

5. Double click the "PCMCIA socket" selection.

Company

Clevo

Categories

Notebooks & Tablet PCs

Serie

Clevo Dxxx Series

Model

Clevo D410V

Description

TouchPad Drivers

Operating System

Windows 2000-XP

Version

5.4.1201.5

Size Driver

5.3MB

File Name

touchpad.zip

Observations

Alps Pointing-device Driver provides a convenient way to modify
setting for Alps Pointing-device. The Alps Pointing-device Driver
is compatible with most standard mice and similar pointing devices.
____________________________________________________________

CONTENTS:

1. Driver Installation for Windows 2000/XP
2. Using the Alps Pointing-device Property Sheets
3. Files On the Setup Disk
____________________________________________________________

1. Driver Installation for Windows 2000/XP

Use this procedure if you use Windows 2000/XP:
1) From the Start menu, select Settings, Control Panel.
2) Double-click Mouse to open Mouse Properties.
3) Select the Hardware tab, and then click Properties.
4) Select the Driver tab, and then click Change.
5) Click Next.
6) Select Display a list of the known drivers for this
device so that I can choose a specific driver, and
then click Next.
7) Click Have Disk.
8) Click Browse.
9) Choose specific directory name that you have copied
driver files.
10) Click Apfiltr.inf, and then click Open.
11) Click OK.
12) Click Alps Pointing-device, and then click Next.
13) Click Next to copy the driver files to your system.
14) Click Finish.
15) Click Close.
16) Click Yes, then restart PC automatically.

Access to Official Website Clevo

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 16 files for Clevo D410V

Select Files