Sceptre SC254W Download Drivers

Available 3 files for SC254W
Company
Sceptre
Categories
Networks Cards
Model
Sceptre SC254W
Description
Drivers
Operating Systems
Windows 2000
Size Driver
17Kb
File Name
net5211_w2k.inf
Company
Sceptre
Categories
Networks Cards
Model
Sceptre SC254W
Description
Drivers
Operating Systems
Windows 98
Size Driver
17Kb
File Name
net5211_98.inf
Company
Sceptre
Categories
Networks Cards
Model
Sceptre SC254W
Description
Drivers
Operating Systems
Windows XP
Size Driver
17Kb
File Name
net5211_xp.inf

The following is the important information of Sceptre SC254W installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the SC254W model that was downloaded (for example c:\SC254W). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Sceptre SC254W in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Sceptre SC254W Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Sceptre SC254W"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Sceptre SC254W.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for SC254W has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Sceptre, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Sceptre for SC254W.

Sceptre SC254W Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Sceptre SC254W" then a properties page appears.


Available 3 Drivers

HelpDrivers Since March 2000