Repotec RP-WU5112A Download Drivers

Available 1 files for RP-WU5112A
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-WU5112A
Description
Wireless-N USB Adapter, 1T2R
Operating Systems
Driver
Version Driver
v1001
Size Driver
15.9Mb
File Name
rp_wu5111a_12a_driver_v1001.rar

The following is the important information of Repotec RP-WU5112A installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the RP-WU5112A model that was downloaded (for example c:\RP-WU5112A). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Repotec RP-WU5112A in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Repotec RP-WU5112A Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Repotec RP-WU5112A"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Repotec RP-WU5112A.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for RP-WU5112A has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Repotec, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Repotec for RP-WU5112A.

Repotec RP-WU5112A Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Repotec RP-WU5112A" then a properties page appears.
HelpDrivers Since March 2000