Repotec RP-WA8610P Download Drivers, Manual and Firmware

Available 4 files for RP-WA8610P
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-WA8610P
Description
802.11a-b-g High Power- Long Range AP - Client Bridge
Operating Systems
Datasheet
Size Driver
74.4Kb
File Name
rp_ac3041_ml.pdf
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-WA8610P
Description
802.11a-b-g High Power-Long Range AP-Client Bridge
Operating Systems
Firmware
Version Firmware
v1.8.2.01
Size Firmware
2.87Mb
File Name
rp_wa8610(p)_fm.rar
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-WA8610P
Description
802.11a-b-g High Power-Long Range AP-Client Bridge
Operating Systems
Firmware
Version Firmware
v1.9.6.07
Size Firmware
1.12Mb
File Name
rp_wa8610p_v19607_fw.rar
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-WA8610P
Description
802.11a-b-g High Power- Long Range AP - Client Bridge
Operating Systems
Manual
Size Manual
2.93Mb
File Name
rp_wa8610_ml.pdf

The following is the important information of Repotec RP-WA8610P installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the RP-WA8610P model that was downloaded (for example c:\RP-WA8610P). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Repotec RP-WA8610P in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Repotec RP-WA8610P Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Repotec RP-WA8610P"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Repotec RP-WA8610P.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for RP-WA8610P has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Repotec, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Repotec for RP-WA8610P.

Repotec RP-WA8610P Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Repotec RP-WA8610P" then a properties page appears.
HelpDrivers Since March 2000