Repotec RP-UB2801A Download Drivers and Firmware

Available 2 files for RP-UB2801A
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-UB2801A
Description
1-P USB2.0 Fast Ethernet Print Server
Operating Systems
Firmware
Version Firmware
v9.08.47E
Size Firmware
333Kb
File Name
rp_ub2801a_fw_v90847e_0019.rar
Company
Repotec
Categories
Networks Cards
Model
Repotec RP-UB2801A
Description
Ethernet Print Server For 2K-XP-2003-Vista x86 OS
Operating Systems
Windows XP-Vista-7
Version Driver
v0.95.04
Size Driver
2.01Mb
File Name
ps_version0.95.04.rar
Information
IPX (Microsoft Windows Vista and 7 are exclusive), TCP/IP (LPR, IPP, RAW 9100), NetBEUI (Microsoft Windows XP, Vista, and 7 are exclusive), AppleTalk, SNMP (management), SMB.

The following is the important information of Repotec RP-UB2801A installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the RP-UB2801A model that was downloaded (for example c:\RP-UB2801A). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Repotec RP-UB2801A in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Repotec RP-UB2801A Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Repotec RP-UB2801A"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Repotec RP-UB2801A.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for RP-UB2801A has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Repotec, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Repotec for RP-UB2801A.

Repotec RP-UB2801A Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Repotec RP-UB2801A" then a properties page appears.
HelpDrivers Since March 2000