Prolink WN2100 Download Drivers

Available 3 files for WN2100
Company
Prolink
Categories
Networks Cards
Model
Prolink WN2100
Description
Driver
Operating Systems
Linux
Version Driver
ver1.4.0.0
Size Driver
765Kb
File Name
drv_wn2100-wn2200_linux_ver1.4.0.0_25.09.2008.zip
Info
25 Sep 2008
Company
Prolink
Categories
Networks Cards
Model
Prolink WN2100
Description
Driver
Operating Systems
Mac OS 10.3, 10.4, 10.5
Version Driver
13 Mar 2008
Size Driver
4.15Mb
File Name
drv_wn2100_wn2200_mac_13.03.2008.zip
Company
Prolink
Categories
Networks Cards
Model
Prolink WN2100
Description
Driver
Operating Systems
Windows 2000-XP-Vista
Version Driver
ver1.0
Size Driver
12Mb
File Name
drv_wn2100_ver1.0_win_07.11.2008.zip
Info
07 Nov 2008

The following is the important information of Prolink WN2100 installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the WN2100 model that was downloaded (for example c:\WN2100). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Prolink WN2100 in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Prolink WN2100 Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Prolink WN2100"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Prolink WN2100.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for WN2100 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Prolink, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Prolink for WN2100.

Prolink WN2100 Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Prolink WN2100" then a properties page appears.


Available 3 Drivers

HelpDrivers Since March 2000