Prolink PFE1000TX Download Drivers

Available 3 files for PFE1000TX
Company
Prolink
Categories
Networks Cards
Model
Prolink PFE1000TX
Description
Driver
Operating Systems
Windows 7
Version Driver
29 Dec 2010
Size Driver
545Kb
File Name
drv_pfe1000tx_win7_29.12.2010.zip
Company
Prolink
Categories
Networks Cards
Model
Prolink PFE1000TX
Description
Driver
Operating Systems
Windows Vista
Version Driver
29 Dec 2010
Size Driver
530Kb
File Name
drv_pfe1000tx_vista_29.12.2010.zip
Company
Prolink
Categories
Networks Cards
Model
Prolink PFE1000TX
Description
Driver
Operating Systems
Windows XP
Version Driver
29 Dec 2010
Size Driver
268Kb
File Name
drv_pfe1000tx_winxp_29.12.2010.zip

The following is the important information of Prolink PFE1000TX installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the PFE1000TX model that was downloaded (for example c:\PFE1000TX). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Prolink PFE1000TX in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Prolink PFE1000TX Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Prolink PFE1000TX"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Prolink PFE1000TX.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for PFE1000TX has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Prolink, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Prolink for PFE1000TX.

Prolink PFE1000TX Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Prolink PFE1000TX" then a properties page appears.


Available 3 Drivers

HelpDrivers Since March 2000