Available 8 files for Micronet SP2500RSW
Select Files
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
MacOS
Size Driver
26KB
File Name
sp2500rs_macos.zip
Observations
This document contains information about the driver for Macintosh Power Mac
series. We urge you to read this document to gain some understanding of this product.
This document address the following topics:
*** The driver does not support the HOT-SWAP functionality of a PC Card.
Thus you must plug the PC Card into your system before booting and should not
remove the PC Card from your system before shuting down. PLEASE DO NOT
HOT-SWAP THE PC CARD WHEN YOUR MAC SYSTEM IS RUNNING.
1. Adapter requirement for PCI adapter
2. Adapter requirement for PC Card
3. Software Installation
4. Setting up Open Transport
5. Setting up the TCP/IP
1. Adapter requirement for PCI adapter
1.1 The NIC on your Ethernet adapter must be RTL8139 series and the Subsystem
Vendor ID must be 10ec and the Subsystem ID must be 8139.
* You can contact your card provider to get the Subsystem Vendor ID and Subsystem
ID. Or you can use the following method by yourself to check the Subsystem
Vendor ID and Subsystem ID.
- Select the "Apple System Profiler" from the Apple Menu.
- Select the "Devices and Volumes" page from the "Apple System Profiler" window.
- Check the "Card Name" field in the information of the PCI-slot where your ethernet
adapter is plugged. The content of "Card Name" is in the form of pcixxxx,yyyy where
xxxx is the Subsystem Vendor ID and yyyy is the Subsystem ID.
1.2 If the Subsystem Vendor ID and Subsystem ID is not 10ec,8139, please contact your
card provider to get the driver for your adapter or follow the following steps to patch
our driver to work with your adapter.
- Get a binary editor to edit the driver.
*** You can use "General Edit Lite" editor You can download "General Edit Lite" from
ftp://physgi.phy.ncku.edu.tw/pub/mac/editor.
- Use this editor to open the driver file "RTL8139x Driver".
- Select "Unlock Data" from the "View" menu item to unlock data of the driver file to
enable the editor to modify the driver file.
- Click on the lower frame to activate the lower frame.
- Replace all the pci10ec,8139 items with your pcixxxx,yyyy by using the "Replace"
function provied in the "Replace" menu item in the "Find" menu item.
- Save the driver file.
note: "Quadrivio General Edit Lite" is a product of Quadrivio corporation. Please read
the text file within the "Quadrivio General Edit Lite". You can contact Quadrivio
corporation for more information.
2. Adapter requirement for PC Card
2.1 The NIC on your PC Card must be RTL8139 series and the Vendor ID musb be 10ec
and the Device ID must be 8139.
* You can contact your PC Card provider to get the Vendor ID and Device ID of your
PC Card.
2.2 If the Vendor ID and Device ID is not 10ec,8139, please contact your PC Card provider
to get the driver for your PC Card or follow the following steps to patch our driver to
work with your PC Card.
- Get a binary editor to edit the driver.
*** You can use "General Edit Lite" editor You can download "General Edit Lite" from
ftp://physgi.phy.ncku.edu.tw/pub/mac/editor.
- Use this editor to open the driver file "RTL8139x Driver".
- Select "Unlock Data" from the "View" menu item to unlock data of the driver file to
enable the editor to modify the driver file.
- Click on the lower frame to activate the lower frame.
- Replace all the pci10ec,8139 items with your pcixxxx,yyyy whree xxxx is the Vendor
ID and yyyy is the Device ID of your PC Card by using the "Replace" function provided
in the "Replace" menu item in the "Find" menu item.
- Save the driver file.
note: "Quadrivio General Edit Lite" is a product of Quadrivio corporation. Please read
the text file within the "Quadrivio General Edit Lite". You can contact Quadrivio
corporation for more information.
3. Software Installation
3.1 Double-click the "Installer" icon in the "RTL8139x Driver for Mac OS" folder. The
installer program examines your computer and installs the appropriate driver
according to your selection.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
MacOS 10.1
Size Driver
39KB
File Name
sp2500rs_macosx101.zip
Observations
Mac OS X 10.1
This is the Mac OS X beta driver for 10/100M PCI Fast Ethernet Adapter.
This beta driver is for Mac OS X 10.1 or newer versions.If your
Mac OS X is 10.0.4, please download the driver for Mac OS X 10.0.4
from http://www.realtek.com.tw
Please follow the following instructions to install the driver:
1. Decompress the rtl8139.tar with the "tar" command in Mac OS X.
tar -xvf rtl8139.tar
Then the rtl8139.pkg folder containing the driver package will be
created.
2. The rtl8139.pkg folder is shown as a single item in the Finder window.
Please double click the rtl8139.pkg item, then the installer will be
launched. Please follow the installer instructions to finish the driver
installation.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows 2000
Size Driver
39KB
File Name
sp2500rs_w98_2000.zip
Observations
Windows 98, Windows2000
Introduction:
-------------
This document describes the procedure to install Windows 98
and Windows 2000 driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \W98_2000\R8139N5.SYS
Installing driver procedure on Microsoft Win98/windows2000 :
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Windows2000, it will auto-detect your system
configuration and find the adapter hardware. ( If Win98/windows2000
does not prompt that it detects the PCI Ethernet adapter,there must
be something wrong with the 10/100M PCI Fast Ethernet Adapter or your
system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and
specify the setup file pathname A:\W98_2000.
3. Win98/Windows2000 will appear some messages to insert Win98/win2000
system disk to complete setup step.
4. Win98/Windows2000 will finish the other installation procedure
automatically, then you restart the system.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows 95
Size Driver
17KB
File Name
sp2500rs_win95.zip
Observations
Windows 95, OSR2
Introduction:
-------------
This document describes the procedure to install Windows 95 and OSR2
driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \WIN95\RTL8139.SYS
NETRTS.INF
Installing driver procedure on Microsoft Windows 95 :
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Windows 95, it will auto-detect your system configuration
and find the adapter hardware. ( If Win95 does not prompt that it
detects the PCI Ethernet adapter,there must be something wrong with
the 10/100M PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and
specify setup file pathname A:\.
3. Windows 95 will appear some messages to insert Windows 95 system
disk to complete setup step.
4. Windows 95 will finish the other installation procedure
automatically, then you restart the system.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows 98
Size Driver
39KB
File Name
sp2500rs_w98_2000.zip
Observations
Windows 98, Windows2000
Introduction:
-------------
This document describes the procedure to install Windows 98
and Windows 2000 driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \W98_2000\R8139N5.SYS
Installing driver procedure on Microsoft Win98/windows2000 :
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Windows2000, it will auto-detect your system
configuration and find the adapter hardware. ( If Win98/windows2000
does not prompt that it detects the PCI Ethernet adapter,there must
be something wrong with the 10/100M PCI Fast Ethernet Adapter or your
system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and
specify the setup file pathname A:\W98_2000.
3. Win98/Windows2000 will appear some messages to insert Win98/win2000
system disk to complete setup step.
4. Win98/Windows2000 will finish the other installation procedure
automatically, then you restart the system.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows Me
Size Driver
35KB
File Name
sp2500rs_winme.zip
Observations
Windows ME
Introduction:
-------------
This document describes the procedure to install Windows ME driver for
10/100M PCI Fast Ethernet Adapter.
Location of Driver: \WinME\R8139N5.SYS
Installing driver procedure on Microsoft Windows ME:
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Windows ME, it will auto-detect your system
configuration and find the adapter hardware. ( If Windows ME does not
prompt that it detects the PCI Ethernet adapter,there must be something
wrong with the 10/100M PCI Fast Ethernet Adapter or your system
enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A.
3. (1)Choose "Specify a location(Advance)(S)" and Click Next.Then to
specify setup file pathname A:\WINME.
(2)Or choose the default "Search for the best driver for your device
(Recommended)(A)" (first option).Then select the setup file
pathname is A:\WINME\NETAMDHL.INF.
4. Windows ME will finish the other installation procedure
automatically, then you restart the system.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows NT
Size Driver
32KB
File Name
sp2500rs_winnt.zip
Observations
Windows NT 3.5, 3.51 & 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT v3.5,
v3.51 & v4.0 driver for 10/100M PCI Fast Ethernet Adapter.
Location of Driver: \WINNT\R8139N4.SYS
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select "
manufacturer", and then press
5. Insert the 10/100M PCI Fast Ethernet driver disk in drive A, enter
drive and pathname A:\ which is the path where the setup file
OEMSETUP.INF is located, and then choose the OK button.
6. The screen will appear "Medium Type" dialog box which is provide
by RTL8139.SYS driver. The default value is "auto" so that the
10/100M PCI Fast Ethernet Adapter and its driver RTL8139.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the RTL8139.SYS is
loading. The other values, "10HALF","10FULL","100HALF" or "100FULL"
are only used when you want to forced 10/100M PCI Fast Ethernet
Adapter to 10M Half-Duplex, 10M Full-Duplex, 100M Half-Duplex or
100 Full-Duplex mode
7. The screen will appear "Input EthernetID" dialog box which is provide
by RTL8139.SYS driver. This option is only required when you have
more than one 10/100M PCI Fast Ethernet Adapters on this computer.
Select "SKIP" if only one adapter is installed on this computer.
8. "Bus Location" display in next screen. Your machine contains more
than one hardware bus, please select the Bus Type and Bus number on
which your network adapter card is installed.
9. NT will then perform the binding process. If any additional network
software options were installed, you may be prompted for specific
information for these packages.
10. Restarting your system you will acquire network service.
NOTES:
------
* Installing Multiple LAN Adapters:
Enter Windows NT and follow above setup procedure step 2,in the
"Network Settings" dialog box, choose the "Configure.." button.
The "Input Ethernet ID" dialog box appears and input adapter's
Ethernet ID. Last step to select OK and close NETWORK SETUP.
Select SKIP if only one adapter is installed on this computer.
Company
Micronet
Categories
Networks Cards
Model
Micronet SP2500RSW
Description
Drivers
Operating System
Windows XP
Size Driver
33KB
File Name
sp2500rs_winxp.zip
Observations
Windows XP
Introduction:
-------------
This document describes the procedure to install Windows XP driver for
10/100M PCI Fast Ethernet Adapter.
Location of Driver: \WINXP\R8139N51.SYS
Installing driver procedure on Microsoft Windows XP:
-----------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Windows XP, it will auto-detect your system configuration
and find the adapter hardware. ( If Windows XP does not prompt that
it detects the PCI Ethernet adapter,there must be something wrong with
the 10/100M PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the 10/100M PCI Fast Ethernet driver disk into drive A and
specify the setup file pathname A:\WinXP.
3. Windows XP will appear some messages to insert Windows XP system
disk to complete setup step.
4. Windows XP will finish the other installation procedure
automatically, then you restart the system.
Access to Official Website Micronet
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.