Intel Xircom 10-100 Network PC Card Adapter (XE2000) Download Drivers

Available 1 files for Xircom 10-100 Network PC Card Adapter (XE2000)
Company
Intel
Categories
Networks Cards
Model
Intel Xircom 10-100 Network PC Card Adapter (XE2000)
Description
Driver
Operating Systems
Windows 2000-Windows 95-95 OSR 2.x-Windows 98-W98 SE-Windows Me-Windows NT 4.0-Windows NT Embedded 4.0
Language Driver
English
Version Driver
2.06
Size Driver
0.9 Mb
File Name
xe2000_206.exe
Date
08/24/2000

The following is the important information of Intel Xircom 10-100 Network PC Card Adapter (XE2000) installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the Xircom 10-100 Network PC Card Adapter (XE2000) model that was downloaded (for example c:\Xircom 10-100 Network PC Card Adapter (XE2000)). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Intel Xircom 10-100 Network PC Card Adapter (XE2000) in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Intel Xircom 10-100 Network PC Card Adapter (XE2000) Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Intel Xircom 10-100 Network PC Card Adapter (XE2000)"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Intel Xircom 10-100 Network PC Card Adapter (XE2000).



  • If during installation in Windows, you will be prompted with a message warning that the driver software for Xircom 10-100 Network PC Card Adapter (XE2000) has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Intel, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Intel for Xircom 10-100 Network PC Card Adapter (XE2000).

Intel Xircom 10-100 Network PC Card Adapter (XE2000) Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Intel Xircom 10-100 Network PC Card Adapter (XE2000)" then a properties page appears.
HelpDrivers Since March 2000