Available 4 files for Integrated 10-100 EtherNet Controller
Company
IBM
Categories
Networks Cards
Model
IBM Integrated 10-100 EtherNet Controller
Description
Drivers
Operating Systems
Windows 2000-XP
Version Driver
1.12.00.00
Size Driver
41Kb
File Name
sis_ethernet_w2k.zip
Info
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 2000.
2. When Windows 2000 starts, a "Found New Hardware Wizard" dialog box appears
identifying the card as a "Ethernet Controller";
Select "Search for a suitable driver for your device [Recommended]".
NOTE, if the "Found New Hardware Wizard" dialog box does not appear,
Windows 2000 fails to detect your adapter. There may be problem with the
adapter itself or with the system BIOS.
3. Click Next then enable the "Specify a location" check box; specify the
correct path in which SiS 900 PCI Fast Ethernet Adapter driver for
Windows 2000 resides.
4. Click Next then Windows ME identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
5. Click Next to let Windows 2000 finishes the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click
"SiS 900 PCI Fast Ethernet Adapter"
then a properties page appears.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. EthernetMediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
<2>. NetworkAddress
Override the adapter's Ethernet address. Legal values are
xx-xx-xx-xx-xx-xx, where xx is a hexadecimal byte value.
Unless necessary, do NOT modify this field and let the
system use the default Ethernet address contained in the
serial ROM on the adapter.
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 2000.
2. When Windows 2000 starts, a "Found New Hardware Wizard" dialog box appears
identifying the card as a "Ethernet Controller";
Select "Search for a suitable driver for your device [Recommended]".
NOTE, if the "Found New Hardware Wizard" dialog box does not appear,
Windows 2000 fails to detect your adapter. There may be problem with the
adapter itself or with the system BIOS.
3. Click Next then enable the "Specify a location" check box; specify the
correct path in which SiS 900 PCI Fast Ethernet Adapter driver for
Windows 2000 resides.
4. Click Next then Windows ME identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
5. Click Next to let Windows 2000 finishes the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click
"SiS 900 PCI Fast Ethernet Adapter"
then a properties page appears.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. EthernetMediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
<2>. NetworkAddress
Override the adapter's Ethernet address. Legal values are
xx-xx-xx-xx-xx-xx, where xx is a hexadecimal byte value.
Unless necessary, do NOT modify this field and let the
system use the default Ethernet address contained in the
serial ROM on the adapter.
Company
IBM
Categories
Networks Cards
Model
IBM Integrated 10-100 EtherNet Controller
Description
Drivers
Operating Systems
Windows 95
Version Driver
1.12.00.00
Size Driver
27Kb
File Name
sis_ethernet_95a.zip
Info
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 95. **HAVE YOUR WINDOWS 95 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 95 starts, a "New Hardware Found" dialog box appears
identifying the card as a "PCI Ethernet Controller". Select
"Driver from disk provided by the hardware manufacturer" then click OK.
NOTE, if the "New Hardware Found" dialog box does not appear, please
do the followings
a. After entering Windows 95, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with "?" icon on it).
f. Select "PCI Ethernet Controller" then click "Remove" button.
Note, if you do not see any "PCI Ethernet Controller", Windows 95
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Restart Windows 95 and goto step 2.
3. Insert the "SiS PCI Fast Ethernet Aapter Drivers Disk" in your floppy
drive and specify the correct path, i.e. A:\Win95 or B:\Win95,
then click OK.
4. Follow the rest screen instructions to complete the installation.
5. You should restart your computer for the changes to take effect after
the installation is complete.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 0900 PCI Fast Ethernet Adapter" or
"SiS 7016 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
7. After setting the properties, you must restart your computer to
make the changes effective.
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 95. **HAVE YOUR WINDOWS 95 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 95 starts, a "New Hardware Found" dialog box appears
identifying the card as a "PCI Ethernet Controller". Select
"Driver from disk provided by the hardware manufacturer" then click OK.
NOTE, if the "New Hardware Found" dialog box does not appear, please
do the followings
a. After entering Windows 95, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with "?" icon on it).
f. Select "PCI Ethernet Controller" then click "Remove" button.
Note, if you do not see any "PCI Ethernet Controller", Windows 95
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Restart Windows 95 and goto step 2.
3. Insert the "SiS PCI Fast Ethernet Aapter Drivers Disk" in your floppy
drive and specify the correct path, i.e. A:\Win95 or B:\Win95,
then click OK.
4. Follow the rest screen instructions to complete the installation.
5. You should restart your computer for the changes to take effect after
the installation is complete.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 0900 PCI Fast Ethernet Adapter" or
"SiS 7016 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
7. After setting the properties, you must restart your computer to
make the changes effective.
Company
IBM
Categories
Networks Cards
Model
IBM Integrated 10-100 EtherNet Controller
Description
Drivers
Operating Systems
Windows 95-98-98Se-Me
Version Driver
1.12.00.00
Size Driver
32Kb
File Name
sis_ethernet_me.zip
Info
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows ME. **HAVE YOUR WINDOWS ME CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows ME starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows ME, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows ME
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Select:
"Specify the location of the driver {Advanced}"
Click Next
4. Select:
"Search for the best driver for your device. {Recommended}"
AND
"Specify a location"
NOTE: Uncheck "Removeable Media {Floppy, CD-ROM...}"
5. Click on the Browse button to direct Win ME to the path
where the driver resides.
Windows ME will find the .inf Netoem.inf in the path specified.
6. Select NEXT.
Windows identifies the adapter as "SiS 900 PCI Fast Ethernet Adapter"
or "Integrated 10/100 Ethernet Controller"
7. Click on Finish to let Window ME finish the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 900 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows ME. **HAVE YOUR WINDOWS ME CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows ME starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows ME, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows ME
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Select:
"Specify the location of the driver {Advanced}"
Click Next
4. Select:
"Search for the best driver for your device. {Recommended}"
AND
"Specify a location"
NOTE: Uncheck "Removeable Media {Floppy, CD-ROM...}"
5. Click on the Browse button to direct Win ME to the path
where the driver resides.
Windows ME will find the .inf Netoem.inf in the path specified.
6. Select NEXT.
Windows identifies the adapter as "SiS 900 PCI Fast Ethernet Adapter"
or "Integrated 10/100 Ethernet Controller"
7. Click on Finish to let Window ME finish the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 900 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
Company
IBM
Categories
Networks Cards
Model
IBM Integrated 10-100 EtherNet Controller
Description
Drivers
Operating Systems
Windows 98-98Se
Version Driver
1.12.00.00
Size Driver
32Kb
File Name
sis_ethernet_98.zip
Info
Install The Driver
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 98. **HAVE YOUR WINDOWS 98 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 98 starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows 98, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows 98
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Click Next then select "Search for the best driver for your device
[Recommended]".
4. Click Next then enable the "Specify a location" check box; specify the
correct path in which SiS 900 PCI Fast Ethernet Adapter driver for Win98
resides.
5. Click Next then Windows 98 identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
6. Click Finish to let Windows 98 finishes the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 900 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
<2>. NetworkAddress
Override the adapter's Ethernet address. Legal values are
xx-xx-xx-xx-xx-xx, where xx is a hexadecimal byte value.
Unless necessary, do NOT modify this field and let the
system use the default Ethernet address contained in the
serial ROM on the adapter.
------------------
1. Install the card in the PCI slot and connect the cable to the network;
turn on the computer and start Windows 98. **HAVE YOUR WINDOWS 98 CD
ROM AVAILABLE** because you will need to copy some additional system
files.
2. When Windows 98 starts, a "Add New Hardware Wizard" dialog box appears
identifying the card as a "PCI Ethernet Controller".
NOTE, if the "Add New Hardware Wizard" dialog box does not appear,
please do the followings
a. After entering Windows 98, double click "My Computer".
b. Double click "Control Panel".
c. Double click "System".
d. Click the "Device Manager" tab.
e. Open "Other Devices" (with a yellow "?" icon).
f. Select "PCI Ethernet Controller" then click "Remove" button to
remove it.
Note, if you do not see any "PCI Ethernet Controller", Windows 98
fails to detect your adapter. There may be problem with the adapter
itself or with the system BIOS.
g. Click Refresh and a "Add New Hardware Wizard" appears identifying
the card as a "PCI Ethernet Controller";
h. goto next step.
3. Click Next then select "Search for the best driver for your device
[Recommended]".
4. Click Next then enable the "Specify a location" check box; specify the
correct path in which SiS 900 PCI Fast Ethernet Adapter driver for Win98
resides.
5. Click Next then Windows 98 identifies the card as
"SiS 900 PCI Fast Ethernet Adapter"
6. Click Finish to let Windows 98 finishes the driver installation.
Adapter Configuration
---------------------
1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "Network" icon.
4. Select
"SiS 900 PCI Fast Ethernet Adapter"
then click "Properties..." button.
5. Click "Advanced" tab.
6. Here, you can set the following properties:
<1>. MediaType
100BaseTX
100BaseTX Full_Duplex
10BaseT Full_Duplex
10BaseT
AUTO_CONFIG ;Default value if not set
<2>. NetworkAddress
Override the adapter's Ethernet address. Legal values are
xx-xx-xx-xx-xx-xx, where xx is a hexadecimal byte value.
Unless necessary, do NOT modify this field and let the
system use the default Ethernet address contained in the
serial ROM on the adapter.
