Available 1 files for Hawking PN102TX

Company

Hawking

Categories

Networks Cards

Model

Hawking PN102TX

Description

Drivers

Operating System

Windows 2000

Size Driver

1.2MB

File Name

dsk211.exe

Observations

How to Config Your PCI adapter.
-------------------------------
1. Firstly , you must find the PCI configuration item in BIOS setup.

2. There are some key points you must take care of.

a). You should know what slot your adapter plug in. You can find the
slot number in your mother board or its operating menu.

b). Enable this device.

c). Enable "master" this item.
The Macronix MX987xx Family Fast Ethernet Adapter MUST be installed
in a bus master PCI slot. Refer to your system documentation to
determine which slots support bus mastering.

d). You can choose what interrupt line you used in some BIOS setup.
For MXIC' adapter, you must choice "INT A" in this item.

e). Choose what interrupt number you want. You can assign it in what
interrupt you choose or in the slot number you choose.

3. When you finish your configuration. You can run the diagnostic program
in the driver diskette. If any problem, please contact your dealer.

NOTICE !!

Conflict with Microsoft EMM386
------------------------------

Problem:
If there is any version of EMM386 prior to version 4.49 on
DOS system, when users run MX987xx drivers for a 32-bit I/O
read/write which will cause the system to be hang and/or reset.

Fix:
Use version 4.49 or higher releases of the EMM386 memory manager(
available with MS-DOS version 6.22).
End-users with earlier version of the EMM386 memory manager should
contact their OEM or Microsoft for information on obtaining an
updated EMM386 device driver.