EnGenius EUB-9701 Download Drivers

Available 3 files for EUB-9701
Company
EnGenius
Categories
Networks Cards
Model
EnGenius EUB-9701
Description
9701-9702-3701
Operating Systems
Apple Mac OS 10.5
Size Driver
4.2Mb
File Name
engenius_eub-9701_9702_3701.zip
Company
EnGenius
Categories
Networks Cards
Model
EnGenius EUB-9701
Description
9701-9702
Operating Systems
Mac 10.3-10.4
Size Driver
2Mb
File Name
eub-9701_9702_mac.zip
Company
EnGenius
Categories
Networks Cards
Model
EnGenius EUB-9701
Description
9701-9702
Operating Systems
Windows XP-Vista 32/64 bits
Version Driver
V2.0.0.3
Size Driver
6.2Mb
File Name
eub-9701_9702_v2.0.0.3.zip

The following is the important information of EnGenius EUB-9701 installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the EUB-9701 model that was downloaded (for example c:\EUB-9701). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card EnGenius EUB-9701 in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which EnGenius EUB-9701 Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "EnGenius EUB-9701"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your EnGenius EUB-9701.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for EUB-9701 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by EnGenius, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by EnGenius for EUB-9701.

EnGenius EUB-9701 Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "EnGenius EUB-9701" then a properties page appears.


Available 3 Drivers

HelpDrivers Since March 2000