Emulex Tivoli Download Drivers, Utilities and Manual

Available 26 files for Tivoli
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Linux 2.4 Kernel
Version Driver
7.3.7
Size Driver
299Kb
File Name
lpfc_2.4_driver_kit-7.3.7-1.tar.gz
Information
7.3.7 RHEL3 u8, u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Base driver, application helper module and install script (306 KB gz file)

1. System Requirements
2. Description of Install Process
2.1 Driver Installation
2.2 Driver Uninstallation
3. Release Notes

----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex LPFC
driver:

Red Hat Enterprise Linux 3 Update 6 and higher
SuSE Linux Enterprise Server 8 with Service Pack 3 and 4

The Emulex LPFC driver and LPFC DFC driver RPMs require gcc compiler
tools and the kernel sources for the running kernel be installed on
the system in order for the driver installation to succeed.
2. Description of Install Process

The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.

Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the LPFC driver
is loaded when the kernel is initialized during system startup.

Please refer to the LPFC Linux 7.3 documentation on the Emulex
website at http://www.emulex.com for an installation manual that
includes a complete set of options for the lpfc-install program.

Emulex strongly recommends uninstalling any old LPFC driver kits
before installing the new driver kit. Please refer to the "Driver
Uninstallation" section to uninstall previous versions of the
Emulex LPFC 7.x or older driver.
2.1 Driver Installation

Log in as the user 'root' to a terminal, change to the directory in
which the Emulex LPFC 7.3 driver kit is installed, and execute the
'lpfc-install' script with no options to install the driver:

./lpfc-install

Once the 'lpfc-install' script has completed successfully, the
Emulex LPFC and LPFC DFC drivers will be loaded, and fibre channel
disks that are properly connected to the system should be
accessible. However, a reboot of the system is recommended to load
the LPFC driver through the ramdisk.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Applications Kit
Operating Systems
Linux 2.4 Kernel
Version Driver
7.3.7
Size Driver
175.7Mb
File Name
elxlinuxapps-2.1a29-7.3.7-1-2.tar
Information
7.3.7 RHEL3 u8, u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Remote Management Utility HBAnyware version 2.1a29 and Diagnostic Utility (lputil) version 2.0a12 (185 MB tar file)

HBAnyware 2.1a29 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 2.1a29
SSC version 2.1a29
DFC Library version 1.2.1-1
Lputil version 2.0a12
HBAAPI version 2.0.f

Dependencies:

lpfc driver version 7.3.7 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.

Installing HBAnyware

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware

1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Linux User Manual
Operating Systems
Linux 2.4 Kernel
Version Manual
7.3.7
Size Manual
6Mb
File Name
set.pdf
Information
7.3.7 RHEL3 u8, u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Installation, Configuration and Troubleshooting (3,451 KB pdf file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Linux 2.4 Kernel
Version Driver
7.3.6
Size Driver
300Kb
File Name
lpfc_2.4_driver_kit-7.3.6-2.tar.gz
Information
7.3.6 RHEL3 u8 (Linux CD), u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Base driver, application helper module and install script (306 KB gz file)

1. System Requirements
2. Description of Install Process
2.1 Driver Installation
2.2 Driver Uninstallation
3. Release Notes

----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex LPFC
driver:

Red Hat Enterprise Linux 3 Update 6 and higher
SuSE Linux Enterprise Server 8 with Service Pack 3 and 4

The Emulex LPFC driver and LPFC DFC driver RPMs require gcc compiler
tools and the kernel sources for the running kernel be installed on
the system in order for the driver installation to succeed.
2. Description of Install Process

The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.

Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the LPFC driver
is loaded when the kernel is initialized during system startup.

Please refer to the LPFC Linux 7.3 documentation on the Emulex
website at http://www.emulex.com for an installation manual that
includes a complete set of options for the lpfc-install program.

Emulex strongly recommends uninstalling any old LPFC driver kits
before installing the new driver kit. Please refer to the "Driver
Uninstallation" section to uninstall previous versions of the
Emulex LPFC 7.x or older driver.
2.1 Driver Installation

Log in as the user 'root' to a terminal, change to the directory in
which the Emulex LPFC 7.3 driver kit is installed, and execute the
'lpfc-install' script with no options to install the driver:

./lpfc-install

Once the 'lpfc-install' script has completed successfully, the
Emulex LPFC and LPFC DFC drivers will be loaded, and fibre channel
disks that are properly connected to the system should be
accessible. However, a reboot of the system is recommended to load
the LPFC driver through the ramdisk.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Applications Kit
Operating Systems
Linux 2.4 Kernel
Version Driver
7.3.6
Size Driver
175.7Mb
File Name
elxlinuxapps-2.1a29-7.3.6-1-5.tar
Information
7.3.6 RHEL3 u8 (Linux CD), u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Remote Management Utility HBAnyware version 2.1a29 and Diagnostic Utility (lputil) version 2.0a12 (185 MB tar file)

HBAnyware 2.1a29 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 2.1a29
SSC version 2.1a29
DFC Library version 1.2.1-1
Lputil version 2.0a12
HBAAPI version 2.0.f

Dependencies:

lpfc driver version 7.3.6 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.

Installing HBAnyware

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware

1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Linux User Manual
Operating Systems
Linux 2.4 Kernel
Version Manual
7.3.6
Size Manual
6Mb
File Name
set.pdf
Information
7.3.6 RHEL3 u8 (Linux CD), u7, u6, SLES8 SP4
SUSE Linux Enterprise Server 8 Service Pack 4 or higher
Red Hat Enterprise Linux 3 Updates 6 or higher
Installation, Configuration and Troubleshooting (3,451 KB pdf file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Applications Kit
Operating Systems
Linux 2.6 Kernel
Version Driver
8.2.0.33.3p
Size Driver
201.4Mb
File Name
elxlinuxapps-4.0a31-8.2.0.33.3p-1-3.tar
Information
Support Resources for PRIMERGY Servers
RHEL5.3
HBAnyware utility 4.0a31

HBAnyware 4.0a31 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 4.0a31
SSC version 4.0a31
DFC Library version 3.0.28-1-1
HBAAPI version 2.1.g
Multipulse version 3.0.30-1
FCAUTHD version 1.19-1-1
Dependencies:

lpfc driver version 8.2.0.33.3p or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.33.3p
Size Manual
1.3Mb
File Name
manual.pdf
Information
8.2.0.33.3p RHEL5.3 (Linux CD)
Red Hat Enterprise Linux 5.3
Driver for Linux User Manual

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
HBAnyware Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.33.3p
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
8.2.0.33.3p RHEL5.3 (Linux CD)
Red Hat Enterprise Linux 5.3
HBAnyware Utility User Manual

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Linux 2.6 Kernel
Version Driver
8.1.10.12
Size Driver
190Kb
File Name
lpfc_2.6_driver_kit-8.1.10.12-1.tar.gz
Information
8.1.10.12 RHEL5, 5.1, SLES10 sp1
Red Hat Enterprise Linux 5, 5.1
SUSE Linux Enterprise Server 10 SP1
Base driver and install script 1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround

----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex
LPFC driver:

Red Hat Enterprise Linux 5

1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement

For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
2. Description of Install Procedure

The lpfc-install script installs the LPFC driver RPM. This RPM
installs the driver sources to the /usr/src/lpfc directory, builds
the driver for the currently running kernel, and then installs the
driver to the proper directory for the currently running kernel.

Once the RPM is installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
3. Known Issues

3.1 PCI Hot Plug Support for applications

3.1.1 Observed problem

PCI Hot Plug has been found to cause applications (HBAnyware utilities or
third party applications) that use the Emulex libraries (i.e. HBAAPI), to
misbehave or malfunction.

3.1.2 Workaround

A user should stop all applications that are accessing LPFC's HBAAPI
interface (HBAnyware utilities or third party applications) before
performing PCI Hot Plug of an LPFC HBA.

Use the following command to stop the HBAnyware application:
#/usr/sbin/hbanyware/stop_hbanyware

After performing PCI Hot Plug of the HBA you can restart the applications.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Applications Kit
Operating Systems
Linux 2.6 Kernel
Version Driver
8.1.10.12
Size Driver
207.2Mb
File Name
elxlinuxapps-3.2a16-8.1.10.12-1-1.tar
Information
8.1.10.12 RHEL5, 5.1, SLES10 sp1
Red Hat Enterprise Linux 5, 5.1
SUSE Linux Enterprise Server 10 SP1
HBAnyware utility 3.2a16, lputil 2.0a14 HBAnyware 3.2a16 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 3.2a16
SSC version 3.2a16
DFC Library version 2.15.1007-1-1
Lputil version 2.0a14
HBAAPI version 2.1.e

Dependencies:

lpfc driver version 8.1.10.12 or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.1.10.12
Size Manual
2.9Mb
File Name
manual_81.pdf
Information
8.1.10.12 RHEL5, 5.1, SLES10 sp1
Red Hat Enterprise Linux 5, 5.1
SUSE Linux Enterprise Server 10 SP1
Manual Installation, Configuration and Troubleshooting (2.92 MB) Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 2
Known Issues.................................................................................................... 2
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 4
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex HBA ................................... 6
Installing the Application Helper Module and Utilities .............................................. 7
Prerequisites ............................................................................................... 7
Procedure ................................................................................................... 7
Utilities Directory Structure.......................................................................... 8
Installing the HBAnyware Security Configurator ................................................ 9
Prerequisites ............................................................................................... 9
Procedure ................................................................................................... 9
Installing HBAnyware, lputil and the Application Helper Module using the
Upgrade Kernel Option...................................................................................... 9
Prerequisites ............................................................................................... 9
Procedure ................................................................................................... 9
Uninstalling the Driver Kit ................................................................................ 10
Uninstalling a Previous Application Helper Module
(Stand Alone Kit) ............................................................................................. 11
Uninstalling the Utilities ......................................................................................... 12
Uninstalling the HBAnyware Security Configurator.......................................... 12
Uninstalling HBAnyware, lputil and the Application Helper Module ................. 12
Configuration ........................................................................................13
Introduction............................................................................................................ 13
Starting the HBAnyware Utility for Linux .......................................................... 14
Changing Management Mode ......................................................................... 15
The HBAnyware Utility Window Element Definitions ....................................... 16
The Menu Bar ........................................................................................... 16
The Toolbar ............................................................................................... 16
The Toolbar Buttons .................................................................................. 17
The Discovery-Tree................................................................................... 17
Property Tabs............................................................................................ 18
Status Bar ................................................................................................. 18
Using the the HBAnyware Utility Command-Line Interface.............................. 18
Using the CLI Client .................................................................................. 19
The CLI Client Command Reference ........................................................ 20
Starting the lputil Utility .................................................................................... 34
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Solaris 8, 9 and 10 (32-bit and 64-bit)
Version Driver
6.02h
Size Driver
12Mb
File Name
solaris-2.1a18-6.02h-1a.tar
Information
LPFC Driver
Important Information about Solaris 10 Update 1
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

HBAnyware 2.1a18 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.02c, or later
hbaapi 2.0e

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Manual
Operating Systems
Solaris 8, 9 and 10 (32-bit and 64-bit)
Version Manual
6.02h
Size Manual
2.7Mb
File Name
manual.pdf
Information
LPFC Driver
Important Information about Solaris 10 Update 1
Installation, Configuration and Troubleshooting (2.67 MB)

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
FCA Utilities
Operating Systems
Solaris 8, 9 and 10 (32-bit and 64-bit)
Version Utilities
6.02h
Size Utilities
76Kb
File Name
emlxu_kit-1.00m-sparc.tar
Information
LPFC Driver
Important Information about Solaris 10 Update 1
emlxadm version 1.00q and emlxdrv version 1.00j for SPARC; needed for a fresh installation of Solaris 10 Update 1 (77 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
FCA Utilities Manual
Operating Systems
Solaris 8, 9 and 10 (32-bit and 64-bit)
Version Manual
6.02h
Size Manual
609Kb
File Name
manual.pdf
Information
LPFC Driver
Important Information about Solaris 10 Update 1
Installing and using the FCA utilities

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
2.42a0
Size Driver
13.8Mb
File Name
fcportkit_2-42a0-1c.exe
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.42a0 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you are using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See our knowledgebase article for more information. If you are using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see our knowledgebase article for help on how to recover your system.
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (13.8 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
2.42a0
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 on x86 platforms and Windows 2000 Server.
The FC Port 2.40a3 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
SP1 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installing the driver using AutoPilot Installer (496 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
2.42a0
Size Manual
3.1Mb
File Name
fcportmanual.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.42a0 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you are using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See our knowledgebase article for more information. If you are using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see our knowledgebase article for help on how to recover your system.
Installation, Configuration and Troubleshooting (3.12 MB)

Introduction.............................................................................................................. 1
Definitions ......................................................................................................... 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Updating the FC Port Driver Using AutoPilot Installer ....................................... 2
Using the FC Port Driver in a Windows 2000 Server System ............................ 2
Upgrading to Windows Server 2003 Service Pack 1 ......................................... 2
Definitions................................................................................................................ 3
FC Port Driver Information....................................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
Update the FC Port Driver Using AutoPilot Installer .......................................... 4
Known Issues .................................................................................................... 4
Files Included in the AutoPilot Installer™ ................................................................ 4
Distribution Executable File Overview ..................................................................... 5
Distribution Executable File Procedure.............................................................. 5
AutoPilot Installer..................................................................................................... 5
Introduction ....................................................................................................... 5
Prerequisites ............................................................................................... 5
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
Hardware-First Installation................................................................................. 6
Prerequisites ............................................................................................... 6
Procedure ................................................................................................... 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Prerequisites ............................................................................................... 8
Procedure ................................................................................................... 8
HBAnyware Security Configurator Installation ....................................................... 10
Prerequisites ............................................................................................. 10
Procedure ................................................................................................. 10
Unattended Installation .......................................................................................... 11
Prerequisites ................................................................................................... 11
AutoPilot Configuration File Format................................................................. 11
Mandatory Configuration File Changes ........................................................... 11
Delete Questions in the APInstall.cfg File........................................................ 12
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.30a9
Size Driver
24.2Mb
File Name
storportminiportkit_1-30a9-1i.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a19 (24 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.30a9
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.30a9
Size Manual
4.6Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Driver Kit
Operating Systems
Windows 2008
Version Driver
2.00a12
Size Driver
21.4Mb
File Name
storportminiportkit_2-00a12-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Base driver, HBAnyware utility 3.3a14 (21.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
Quick Installation Manual
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
114Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
User Manual
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
1.2Mb
File Name
manual.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Storport Miniport Driver Version 2.10 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex Tivoli
Description
User Manual HBAnyware Utility
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
HBAnyware Utility Version 4.0

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
HelpDrivers Since March 2000