Emulex LPe11002 Download Drivers and Manual

Members
Available 92 files for LPe11002
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
8.2.0.30.49vmw and 8.20.30.52vmw
Size Driver
2Mb
File Name
elxvmwarecorekit-esx40-4.0a46-1.x86_64.rpm
Information
ESX/ESXi 4.0
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware 4.0a46 agent, hbacmd, HP Rubah library version 9.0 (2.05 MB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual version 8.2.0.30.49vmw
Operating Systems
VMWare
Version Manual
8.2.0.30.49vmw and 8.20.30.52vmw
Size Manual
1.4Mb
File Name
vmware.pdf
Information
ESX/ESXi 4.0
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
Driver for VMware User Manual, version 8.2.0.30.49vmw

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual version 8.2.0.30.52vmw
Operating Systems
VMWare
Version Manual
8.2.0.30.49vmw and 8.20.30.52vmw
Size Manual
1.4Mb
File Name
vmware.pdf
Information
ESX/ESXi 4.0
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
Driver for VMware User Manual, version 8.2.0.30.52vmw

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Command Line User Manual
Operating Systems
VMWare
Version Manual
8.2.0.30.49vmw and 8.20.30.52vmw
Size Manual
888Kb
File Name
manual.pdf
Information
vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware Command Line Version 4.0 (812 KB pdf file)

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
7.4.0.31
Size Driver
910Kb
File Name
elxvmwarecorekit-4.0a27-2.i386.rpm
Information
ESX/ESXi 4.0
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware 4.0a27 agent, hbacmd, HP Rubah library version 9.0 (300 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual
Operating Systems
VMWare
Version Manual
7.4.0.31
Size Manual
1Mb
File Name
vmware.pdf
Information
ESX/ESXi 4.0
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
Driver for VMware User Manual, version 7.4.x

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Command Line User Manual
Operating Systems
VMWare
Version Manual
7.4.0.31
Size Manual
888Kb
File Name
manual.pdf
Information
ESX/ESXi 4.0
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware Command Line Version 4.0

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
8.2.0.30.53vmw
Size Driver
2Mb
File Name
elxvmwarecorekit-esx40-4.0a46-1.x86_64.rpm
Information
vSphere 4 (ESX 4.0, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual
Operating Systems
VMWare
Version Manual
8.2.0.30.53vmw
Size Manual
1.6Mb
File Name
vmware.pdf
Information
vSphere 4 (ESX 4.0, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Command Line User Manual
Operating Systems
VMWare
Version Manual
8.2.0.30.53vmw
Size Manual
888Kb
File Name
manual.pdf
Information
vSphere 4 (ESX 4.0, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
7.4.0.40
Size Driver
931Kb
File Name
elxvmwarecorekit-esx35-4.0a45-1.i386.rpm
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
HBAnyware 4.0a45 agent, hbacmd, HP Rubah library version 9.0 (932 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual
Operating Systems
VMWare
Version Manual
7.4.0.40
Size Manual
1.2Mb
File Name
vmware.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Driver for VMware User Manual, version 7.4.0.40

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Command Line User Manual
Operating Systems
VMWare
Version Manual
7.4.0.40
Size Manual
888Kb
File Name
manual.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
HBAnyware Command Line Version 4.0

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2, 7.3.2_vmw (All)
Size Driver
302Kb
File Name
elxvmwarecorekit-2.1a42-1.i386.rpm
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
HBAnyware 2.1a42 agent, hbacmd, HP Rubah library version 9.0 (303 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual version 7.3.x
Operating Systems
VMWare
Version Manual
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2, 7.3.2_vmw (All)
Size Manual
986Kb
File Name
vmware.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
Driver for VMware User Manual, version 7.3.x

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual version 7.4.x
Operating Systems
VMWare
Version Manual
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2, 7.3.2_vmw (All)
Size Manual
1016Kb
File Name
vmware.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
Driver for VMware User Manual, version 7.4.x

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Manual version 3.1
Operating Systems
VMWare
Version Manual
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2, 7.3.2_vmw (All)
Size Manual
2.1Mb
File Name
hbanyware31.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
HBAnyware Utility User Manual, version 3.1

Introduction.............................................................................................................. 1
Starting the HBAnyware Utility .......................................................................... 2
Starting the HBAnyware Security Configurator............................................ 2
Starting HBAnyware from the Command Line ............................................. 3
Changing Management Mode .......................................................................... 3
The HBAnyware Utility Window Element Definitions ......................................... 4
The Menu Bar ............................................................................................. 4
The Toolbar ................................................................................................. 4
The Toolbar Buttons .................................................................................... 5
The Discovery-Tree..................................................................................... 5
Property Tabs.............................................................................................. 6
Status Bar ................................................................................................... 6
Using the HBAnyware Command-Line Interface ............................................... 6
Discovering HBAs.................................................................................................. 11
Configuring Discovery Settings ....................................................................... 12
Sorting HBA Information ........................................................................................ 13
Sort by Host Name .......................................................................................... 13
Sort by Fabric Address .................................................................................... 13
Sorting Local HBAs Only ................................................................................. 13
Viewing HBA Information....................................................................................... 14
Viewing Discovery Information ........................................................................ 14
Discovery Information Field Definitions ..................................................... 14
Viewing Host Information................................................................................. 15
The Host Information Tab.......................................................................... 15
The Host Driver Parameters Tab............................................................... 16
Viewing General HBA Attributes...................................................................... 17
Adapter Summary Field Definitions ........................................................... 17
Adapter Status Area Field Definitions........................................................ 18
Viewing Detailed HBA Information................................................................... 18
Adapter Details Field Definitions ............................................................... 19
Port Attributes Field Definitions ................................................................. 19
Loop Map Table Definitions ....................................................................... 20
Viewing Fabric Information .............................................................................. 20
Discovery Information Field Definitions ..................................................... 20
Viewing Target Information .............................................................................. 21
Target Information Field Definitions........................................................... 21
Viewing LUN Information................................................................................. 22
LUN Information Field Definitions.............................................................. 22
Viewing Port Statistics ..................................................................................... 23
Port Statistics Field Definitions .................................................................. 23
Viewing Firmware Information ......................................................................... 24
Firmware Field Definitions......................................................................... 25
Viewing Target Mapping ................................................................................. 26
Target Mapping Field Definitions ............................................................... 26
Resetting HBAs ..................................................................................................... 27
Updating Firmware ................................................................................................ 27
Prerequisites ............................................................................................. 27
Procedure ................................................................................................. 27
Updating Firmware (Batch Mode).................................................................... 29
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Manual version 3.2
Operating Systems
VMWare
Version Manual
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2, 7.3.2_vmw (All)
Size Manual
2.4Mb
File Name
hbanyware32.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 v3.5 (ESX 3.5 U2, Virtual Center 2.5) - 2, 4 & 8 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
HBAnyware Utility User Manual, version 3.2

Introduction.............................................................................................................. 1
Starting the HBAnyware Utility .......................................................................... 2
Starting HBAnyware with Web Launch ........................................................ 2
Starting the HBAnyware Security Configurator............................................ 2
Starting HBAnyware from the Command Line ............................................. 3
Changing Management Mode .......................................................................... 3
The HBAnyware Utility Window Element Definitions ......................................... 4
The Menu Bar ............................................................................................. 4
The Toolbar ................................................................................................. 4
The Toolbar Buttons .................................................................................... 5
The Discovery-Tree..................................................................................... 5
Property Tabs.............................................................................................. 6
Status Bar ................................................................................................... 7
Using the HBAnyware Utility Command-Line Interface...................................... 7
Using the CLI Client (Linux) ........................................................................ 7
Discovering HBAs.................................................................................................. 22
Configuring Discovery Settings ....................................................................... 23
Sorting HBA Information ........................................................................................ 24
Sort by Host Name .......................................................................................... 24
Sort by Fabric Address .................................................................................... 24
Sorting Local HBAs Only ................................................................................. 24
Viewing HBA Information....................................................................................... 25
Viewing Discovery Information ........................................................................ 25
Discovery Information Field Definitions ..................................................... 25
Viewing Host Information................................................................................. 26
The Host Information Tab.......................................................................... 26
The Host Driver Parameters Tab............................................................... 27
Viewing General HBA Attributes...................................................................... 28
Adapter Summary Field Definitions ........................................................... 28
Adapter Status Area Field Definitions........................................................ 29
Viewing Detailed HBA Information................................................................... 29
Adapter Details Field Definitions ............................................................... 30
Port Attributes Field Definitions ................................................................. 30
Loop Map Table Definitions ....................................................................... 31
Viewing Fabric Information .............................................................................. 31
Discovery Information Field Definitions ..................................................... 31
Viewing Target Information .............................................................................. 32
Target Information Field Definitions........................................................... 32
Viewing LUN Information................................................................................. 33
LUN Information Field Definitions.............................................................. 33
Viewing Port Statistics ..................................................................................... 34
Port Statistics Field Definitions .................................................................. 34
Viewing Firmware Information ......................................................................... 35
Firmware Field Definitions......................................................................... 36
Viewing Target Mapping ................................................................................. 37
Target Mapping Field Definitions ............................................................... 37
Resetting HBAs ..................................................................................................... 38
Updating Firmware ................................................................................................ 38
Prerequisites ............................................................................................. 38
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2
Size Driver
107Kb
File Name
lpfcutil-7.4.0.13-1.tgz
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, ESX 3.5 U2 Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Lputil version 2.0a14, HBA API library version 2.0.f

1. Introduction
2. System Requirements
3. Installation
4. Uninstallation
5. Using the utilities
----------------------------------------------------------------------

1. Introduction
This utilities package includes diagnostic and management utilities and
libraries that can be used to manage Emulex HBAs in a VMware ESX server
environment.

Each version of these utilities corresponds to a specific VMware-distributed
Emulex device driver version. A utilities/driver combination supports multiple
versions of the VMware Operating System.
2. System Requirements
The following VMware Operating System version(s) are supported by this
utilities package:

- Virtual Infrastructure 3 (ESX 3.0.0 or greater, Virtual Center 2.0.2)

The following VMware-distributed Emulex device drivers are supported by this
utilities package:

- 7.3.2_vmw1 or greater

For the list of supported HBAs please refer to the supported ESX hardware
compatibility lists.
3. Installation
To install the contents of this package you should execute the Install.sh
script as the 'root' user:
# ./Install.sh

The Install.sh script is included in this package.

The installation process will install the following components:

Utilities:
- lputil (Diagnostic/management utility, Rev. 2.0a14)
- dfc (Diagnostic/management utility)

Libraries:
- libdfc.so (Diagnostic utility library interface)
- libHBAAPI.so (Library to support HBAAPI standard, Rev. 2.0.g)
- libemulexhbaapi.so (Library to support HBAAPI standard)
4. Uninstallation
To remove the contents of this package you should execute the Remove.sh script
as the 'root' user:
# ./Remove.sh

The Remove.sh script is included in this package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual
Operating Systems
VMWare
Version Manual
7.4.0.13, 7.4.0.13-1, 7.4.0.13-2
Size Manual
1016Kb
File Name
vmware.pdf
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, ESX 3.5 U2 Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Driver for VMware User Manual, version 7.4.x

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
7.3.2_vmw4 and 7.3.2_vmw10
Size Driver
115Kb
File Name
lpfcutil-7.3.2-3.tgz
Information
Virtual Infrastructure 3 (ESX 3.0.2, ESX 3.0.3, Virtual Center 2.0.2) - 2 & 4 Gb/s HBAs
Lputil version 2.0a14, HBA API library version 2.0.f

1. Introduction
2. System Requirements
3. Installation
4. Uninstallation
5. Using the utilities
----------------------------------------------------------------------

1. Introduction
This utilities package includes diagnostic and management utilities and
libraries that can be used to manage Emulex HBAs in a VMware ESX server
environment.

Each version of these utilities corresponds to a specific VMware-distributed
Emulex device driver version. A utilities/driver combination supports multiple
versions of the VMware Operating System.
2. System Requirements
The following VMware Operating System version(s) are supported by this
utilities package:

- Virtual Infrastructure 3 (ESX 3.0.0 or greater, Virtual Center 2.0.2)

The following VMware-distributed Emulex device drivers are supported by this
utilities package:

- 7.3.2_vmw1 or greater

For the list of supported HBAs please refer to the supported ESX hardware
compatibility lists.
3. Installation
To install the contents of this package you should execute the Install.sh
script as the 'root' user:
# ./Install.sh

The Install.sh script is included in this package.

The installation process will install the following components:

Utilities:
- lputil (Diagnostic/management utility, Rev. 2.0a14)
- dfc (Diagnostic/management utility)

Libraries:
- libdfc.a (Diagnostic utility library interface)
- libdfc.so (Diagnostic utility library interface)
- libHBAAPI.so (Library to support HBAAPI standard, Rev. 2.0.f)
- libemulexhbaapi.so (Library to support HBAAPI standard)
4. Uninstallation
To remove the contents of this package you should execute the Remove.sh script
as the 'root' user:
# ./Remove.sh

The Remove.sh script is included in this package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Manual
Operating Systems
VMWare
Version Manual
7.3.2_vmw4 and 7.3.2_vmw10
Size Manual
986Kb
File Name
vmware.pdf
Information
Virtual Infrastructure 3 (ESX 3.0.2, ESX 3.0.3, Virtual Center 2.0.2) - 2 & 4 Gb/s HBAs
Driver for VMware User Manual, version 7.3.x

Installation...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 1
Compatibility...................................................................................................... 2
Known Issues .................................................................................................... 2
Installing the Driver.................................................................................................. 2
Installing the Emulex Utilities................................................................................... 3
Installing the HBAnyware Agent and lputil ......................................................... 3
Prerequisites ............................................................................................... 3
Procedures.................................................................................................. 3
Uninstalling the Emulex Utilities............................................................................... 4
Uninstalling the HBAnyware Agent and lputil..................................................... 4
Configuration ..........................................................................................5
Introduction.............................................................................................................. 5
Configuration Methods Using Native ESX Tools................................................ 5
Permanent Configuration Methods.............................................................. 5
Temporary Configuration Method ................................................................ 6
Dynamically Add LUNs and Targets......................................................................... 7
Driver Configuration Parameters ............................................................................. 7
Creating a Fibre Channel Remote Boot Disk ......................................................... 10
Troubleshooting....................................................................................11
Introduction............................................................................................................ 11
Unusual Situations and Their Resolutions ............................................................. 11
General Situations........................................................................................... 11
lpfc Log Messages................................................................................................. 13
Introducton ...................................................................................................... 13
Severity Codes.......................................................................................... 13
Message Group Masks ............................................................................. 13
Message Log Example.............................................................................. 14
ELS Events (0100 - 0199) ............................................................................... 15
Link Discovery Events (0200 - 0299) ............................................................... 19
Mailbox Events (0300 - 0399).......................................................................... 28
Initialization Events (0400 - 0499) ................................................................... 33
FCP Traffic History (0700 - 0799) .................................................................... 39
Node Table Events (0900 - 0999) .................................................................... 42
Miscellaneous Events (1200 - 1299) ............................................................... 44
Link Events (1300 - 1399) ............................................................................... 45
Log Messages - LIBDFC Events (1600 - 1699) ............................................... 47
Supported Features
• Supports 256 (0-255) logical unit numbers (LUNs)
• Supports dynamically adding LUNs and targets
• Topology support: FC-AL, point-to-point, fabric with auto-topology negotiation
• Support for 1, 2 and 4 Gb with auto rate negotiation
• Protocols: SCSI-FCP, FCP-2 (FC-Tape profile, including use of ADISC instead of PLOGI), FC
initiator mode
• Support for up to sixteen host bus adapter (HBA) ports
• Monitoring and parameter configuration using Emulex's HBAnyware™ Java-based graphical
user interface utility and the HBACMD scriptable command-line interface
• Parameter configuration using Emulex's LightPulse® lputil command-line interface utility
• Support for Common HBA API
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Library Kit
Operating Systems
VMWare
Version Driver
7.4.0.13, 7.4.0.13-1, 7.3.2_vmw (All)
Size Driver
35Kb
File Name
em_cpq9_vmware.tar.gz
Information
Virtual Infrastructure 3 v3.5 (ESX 3.5.0, ESX 3.5 U1, Virtual Center 2.5) - 2 & 4 Gb/s HBAs
Virtual Infrastructure 3 (ESX 3.0, ESX 3.0.1, ESX 3.0.2, ESX 3.0.3; Virtual Center 2.0, 2.0.1, 2.0.2) - 2 & 4 Gb/s HBAs
HP Rubah Library version 9.0 (36 KB gz file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
lpfcutil-7.1.14
Size Driver
105Kb
File Name
lpfcutil-7.1.14.tgz
Information
Lputil version 1.6a10, HBA API library version 2.0.f; Virtual Infrastructure 3 (ESX 3.0.2, Virtual Center 2.0.2) - Alternate driver and Microsoft Cluster Software , 2 GBit/s HBAs (7.1.14_vmw2); Virtual Infrastructure 3 (ESX 3.0.1, Virtual Center 2.0.1) - Microsoft Cluster Software, 2 Gb/s HBAs (7.1.14_vmw1); Virtual Infrastructure 3 (ESX 3.0, Virtual Center 2.0) - 2 Gb/s HBAs (7.1.14_vmw1)

This kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms
- 64-bit Intel platforms

- Supported Linux OS:

- Red Hat Enterprise Linux AS 2.1
- Red Hat Enterprise Linux AS 3.0
- SuSE SLES 8
Please refer to Emulex Website (www.emulex.com) for an update and accurate
list of kernel versions.

- Supported Emulex enterprise adapters:
- LP10000DC
- LP10000
- LP1050DC
- LP1050
- LP9802DC
- LP9802
- LP982
- LP9402DC
- LP9002DC
- LP9002L
- LP9000
- LP952L
- LP8000DC
- LP8000


************************************************************************
This Application kit has been designed to work only with the Open Source
Linux Driver Kit, Version 7.1.14.

It includes lputil version 1.6a10.

Installation:
After you unpack this tarball, type ./Install.sh. This will install
the Emulex applications and libraries.

Removal:
To remove the Emulex applications, libraries and base HBAAPI library,
type ./Remove.sh.
************************************************************************

dfc Diagnostic utility for driver debug
libdfc.a Diagnostic utility library interface
libHBAAPI.so Library to support HBAAPI standard
libemulexhbaapi.so Library to support HBAAPI standard
lputil Diagnostic utility for adapter maitenance
Install.sh Installation script
Remove.sh Removal script
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
lpfcutil-7.3.2
Size Driver
113Kb
File Name
lpfcutil-7.3.2.tgz
Information
Lputil version 2.0a12, HBA API library version 2.0.f; Virtual Infrastructure 3 (ESX 3.0.1, Virtual Center 2.0.1) - 2 & 4 Gb/s HBAs (7.3.2_vmw2); Virtual Infrastructure 3 (ESX 3.0, Virtual Center 2.0) - 4 Gb/s HBAs (7.3.2_vmw1); ESX 2.5.5 - 2 & 4 Gb/s HBAs (7.3.2_vmw4); ESX 2.5.4 Driver Disk - 4 Gb/s HBAs (7.3.2_vmw3)

This kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms
- 64-bit Intel platforms

- Supported Linux OS:

- Red Hat Enterprise Linux AS 2.1
- Red Hat Enterprise Linux AS 3.0
- SuSE SLES 8
Please refer to Emulex Website (www.emulex.com) for an update and accurate
list of kernel versions.

- Supported Emulex enterprise adapters:
- LP10000DC
- LP10000
- LP1050DC
- LP1050
- LP9802DC
- LP9802
- LP982
- LP9402DC
- LP9002DC
- LP9002L
- LP9000
- LP952L
- LP8000DC
- LP8000


************************************************************************
This Application kit has been designed to work only with the Open Source
Linux Driver Kit, Version 7.3.2.

It includes lputil version 2.0a12.

Installation:
After you unpack this tarball, type ./Install.sh. This will install
the Emulex applications and libraries.

Removal:
To remove the Emulex applications, libraries and base HBAAPI library,
type ./Remove.sh.
************************************************************************

dfc Diagnostic utility for driver debug
libdfc.a Diagnostic utility library interface
libdfc.so Diagnostic utility library interface
libHBAAPI.so Library to support HBAAPI standard
libemulexhbaapi.so Library to support HBAAPI standard
lputil Diagnostic utility for adapter maitenance
Install.sh Installation script
Remove.sh Removal script
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
lpfcutil-2.01g
Size Driver
107Kb
File Name
lpfcutil-2.01g-2.tgz
Information
Lputil version 1.6a6, HBA API library version 2.0f; ESX 2.5.4 (2.01g_vmw2, also alternate for ESX 2.5.5); ESX 2.5.3 (2.01g_vmw1); ESX 2.5.0, ESX 2.5.1 and ESX 2.5.2 (2.01g)

This Application kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms (IA-32)
- 64-bit Intel platforms (IA-64)
- Power PC 64 bits (PPC)

- Supported Linux OS:

- Red Hat Enterprise Linux AS 2.1
- Red Hat Enterprise Linux AS 3.0
- SuSE SLES 8 ppc64
Please refer to Emulex Website (www.emulex.com) for an update and accurate
list of kernel versions.

- Supported Emulex enterprise adapters:
- LP10000DC
- LP10000
- LP1050DC
- LP1050
- LP9802DC
- LP9802
- LP982
- LP9402DC
- LP9002DC
- LP9002L
- LP9000
- LP952L
- LP8000DC
- LP8000


************************************************************************
This Application kit has been designed to work only with the Open Source
Linux Driver Kit, Version 2.01g, and HBAAPI version 2.0f.

It includes lputil version 1.6a6.

Installation:
After you unpack this tarball, type ./Install.sh. This will install
the Emulex applications and libraries.

Removal:
To remove the Emulex applications, libraries and base HBAAPI library,
type ./Remove.sh.
************************************************************************

dfc Diagnostic utility for driver debug
libdfc.a Diagnostic utility library interface
libHBAAPI.so Library to support HBAAPI standard
libemulexhbaapi.so Library to support HBAAPI standard
lputil Diagnostic utility for adapter maitenance
Install.sh Installation script
Remove.sh Removal script
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
lpfcutil-1.22e
Size Driver
120Kb
File Name
lpfcutil-1.22e.tgz
Information
Lputil version 1.5a0, HBA API library version 2.0b; alternate driver for ESX 2.0, ESX 2.0.1, ESX 2.1, ESX 2.1.1 and ESX 2.1.2

This Application kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms (IA-32)
- 64-bit Intel platforms (IA-64)
- Power PC 64 bits (PPC)

- Supported Linux OS (note that testing has been conducted only with the kernels in parenthesis):

- Red Hat Pro 7.3 (kernel 2.4.18-27)
- Red Hat Pro 8.0 (kernel 2.4.18-27)
- Red Hat Advanced Server 2.1 x86 (kernel 2.4.9-e.16)
- SLES 7 x86 (kernel 2.4.16)
- SLES 8 x86 (kernel 2.4.19)
- Red Hat Advanced Server 2.1 IA-64 (kernel 2.4.18-e.25)
- SuSE 8.0 ppc64 (kernel 2.4.19-u11-ppc64)

- Supported Emulex enterprise adapters:
- LP8000
- LP9000
- LP9002L
- LP9002DC
- LP9402DC
- LP9802
- LP10000

************************************************************************
This Application kit has been designed to work only with the Open Source
Linux Driver Kit, Version 1.22e.

It includes lputil version 1.4a8

Installation:
After you unpack this tarball, type ./Install.sh. This will install
the Emulex applications and libraries.

Removal:
To remove the Emulex applications, libraries and base HBAAPI library,
type ./Remove.sh.
************************************************************************

dfc Diagnostic utility for driver debug
fcdiag.h Diagnostic utility library header file
libdfc.a Diagnostic utility library interface
libHBAAPI.so Library to support HBAAPI standard
libemulexhbaapi.so Library to support HBAAPI standard
lputil Diagnostic utility for adapter maitenance
Install.sh Installation script
Remove.sh Removal script

The following section details the LINUX md5sum (128 bit checksum) results
for the current release contents:

For I386:

57216ef4164549da6cbf552df6f5773d dfc
9b88355a3c1a311306a8579ff4b46c2d fcdiag.h
7b429052c5054f7caca26cc6e7ab8818 libHBAAPI.so
04f44bcfc7aa63f57abba85ecdd9a14e libdfc.a
1968b9a74ba82e5c42242ae0279ceb39 libemulexhbaapi.so
aa43ddcfb9f7c9f5a4063652e69d0a7b lputil
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Applications Kit
Operating Systems
VMWare
Version Driver
lpfcutil-4.20q
Size Driver
127Kb
File Name
lpfcutil-4.20q.tgz
Information
Lputil version 1.5a0, HBA API library version 2.0b; alternate driver for ESX 2.0, ESX 2.0.1, ESX 2.1, ESX 2.1.1 and ESX 2.1.2

This Application kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms (IA-32)
- 64-bit Intel platforms (IA-64)
- Power PC 64 bits (PPC)

- Supported Linux OS (note that testing has been conducted only with the kernels in parenthesis):

- Red Hat Pro 7.3 (kernel 2.4.18-27)
- Red Hat Pro 8.0 (kernel 2.4.18-27)
- Red Hat Advanced Server 2.1 x86 (kernel 2.4.9-e.16)
- SLES 7 x86 (kernel 2.4.16)
- SLES 8 x86 (kernel 2.4.19)
- Red Hat Advanced Server 2.1 IA-64 (kernel 2.4.18-e.25)
- SuSE 8.0 ppc64 (kernel 2.4.19-u11-ppc64)

- Supported Emulex enterprise adapters:
- LP8000
- LP9000
- LP9002L
- LP9002DC
- LP9402DC
- LP9802
- LP10000

************************************************************************
This Application kit has been designed to work only with the Open Source
Linux Driver Kit, Version 4.20q.

Installation:
After you unpack this tarball, type ./Install.sh. This will install
the Emulex applications and libraries.

Removal:
To remove the Emulex applications, libraries and base HBAAPI library,
type ./Remove.sh.
************************************************************************

dfc Diagnostic utility for driver debug
fcdiag.h Diagnostic utility library header file
libdfc.a Diagnostic utility library interface
libHBAAPI.so Library to support HBAAPI standard
libemulexhbaapi.so Library to support HBAAPI standard
lputil Diagnostic utility for adapter maitenance
Install.sh Installation script
Remove.sh Removal script
The following section details the LINUX md5sum (128 bit checksum) results
for the current release contents:

db2ebdcdf2d3fde90feb0c3024e56808 ./dfc
327385b6a6e0df6965cd0a66fba45190 ./fcdiag.h
f5a8c90c7446c051c78c79649fc0289d ./libdfc.a
5a45829a47b00df673de2a8410036a9f ./lputil
743c00a91536b13fbfe11bd4326eb0ba ./libHBAAPI.so
ad015c6f292b893167e2467cf2b7bcd6 ./libemulexhbaapi.so
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000
Version Driver
5.20a9
Size Driver
14.3Mb
File Name
scsiportminiportkit_5-20a9-1d.exe
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21 (5,376 KB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2000
Version Manual
5.20a9
Size Manual
2.9Mb
File Name
manual.pdf
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
2.42a0
Size Driver
13.8Mb
File Name
fcportkit_2-42a0-1c.exe
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.42a0 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you are using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See our knowledgebase article for more information. If you are using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see our knowledgebase article for help on how to recover your system.
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (13.8 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
2.42a0
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.41a1 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you're using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See Solution ID: 27815 for more information. If you're using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation.
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installing the driver using AutoPilot Installer (496 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
2.42a0
Size Manual
3.1Mb
File Name
fcportmanual.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.42a0 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you are using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See our knowledgebase article for more information. If you are using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see our knowledgebase article for help on how to recover your system.
Installation, Configuration and Troubleshooting (3.12 MB)

Introduction.............................................................................................................. 1
Definitions ......................................................................................................... 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Updating the FC Port Driver Using AutoPilot Installer ....................................... 2
Using the FC Port Driver in a Windows 2000 Server System ............................ 2
Upgrading to Windows Server 2003 Service Pack 1 ......................................... 2
Definitions................................................................................................................ 3
FC Port Driver Information....................................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
Update the FC Port Driver Using AutoPilot Installer .......................................... 4
Known Issues .................................................................................................... 4
Files Included in the AutoPilot Installer™ ................................................................ 4
Distribution Executable File Overview ..................................................................... 5
Distribution Executable File Procedure.............................................................. 5
AutoPilot Installer..................................................................................................... 5
Introduction ....................................................................................................... 5
Prerequisites ............................................................................................... 5
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
Hardware-First Installation................................................................................. 6
Prerequisites ............................................................................................... 6
Procedure ................................................................................................... 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Prerequisites ............................................................................................... 8
Procedure ................................................................................................... 8
HBAnyware Security Configurator Installation ....................................................... 10
Prerequisites ............................................................................................. 10
Procedure ................................................................................................. 10
Unattended Installation .......................................................................................... 11
Prerequisites ................................................................................................... 11
AutoPilot Configuration File Format................................................................. 11
Mandatory Configuration File Changes ........................................................... 11
Delete Questions in the APInstall.cfg File........................................................ 12
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
2.41a1 32-Bit
Size Driver
13.8Mb
File Name
fcportkit_2-41a1-1b.exe
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.41a1 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you're using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See Solution ID: 27815 for more information. If you're using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation.
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (13.8 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
2.41a1 32-Bit
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.41a1 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you're using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See Solution ID: 27815 for more information. If you're using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation.
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installing the driver using AutoPilot Installer (496 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
2.41a1 32-Bit
Size Manual
3.1Mb
File Name
fcportmanual.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.42a0 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you are using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See our knowledgebase article for more information. If you are using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see our knowledgebase article for help on how to recover your system.
Installation, Configuration and Troubleshooting (3.12 MB)

Introduction.............................................................................................................. 1
Definitions ......................................................................................................... 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Updating the FC Port Driver Using AutoPilot Installer ....................................... 2
Using the FC Port Driver in a Windows 2000 Server System ............................ 2
Upgrading to Windows Server 2003 Service Pack 1 ......................................... 2
Definitions................................................................................................................ 3
FC Port Driver Information....................................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
Update the FC Port Driver Using AutoPilot Installer .......................................... 4
Known Issues .................................................................................................... 4
Files Included in the AutoPilot Installer™ ................................................................ 4
Distribution Executable File Overview ..................................................................... 5
Distribution Executable File Procedure.............................................................. 5
AutoPilot Installer..................................................................................................... 5
Introduction ....................................................................................................... 5
Prerequisites ............................................................................................... 5
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
Hardware-First Installation................................................................................. 6
Prerequisites ............................................................................................... 6
Procedure ................................................................................................... 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Prerequisites ............................................................................................... 8
Procedure ................................................................................................... 8
HBAnyware Security Configurator Installation ....................................................... 10
Prerequisites ............................................................................................. 10
Procedure ................................................................................................. 10
Unattended Installation .......................................................................................... 11
Prerequisites ................................................................................................... 11
AutoPilot Configuration File Format................................................................. 11
Mandatory Configuration File Changes ........................................................... 11
Delete Questions in the APInstall.cfg File........................................................ 12
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
2.40a3 32-Bit
Size Driver
13.8Mb
File Name
fcportkit_2.40a3-1b.exe
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 on x86 platforms and Windows 2000 Server.
The FC Port 2.40a3 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
SP1 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
2.40a3 32-Bit
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server on x86 platforms.
The FC Port 2.41a1 driver has been qualified with the Universal WHQL program, which does not support Microsoft Cluster Server qualifications.
FC Port 2.22a8 Not Supported with SP1 and SP2
If you're using FC Port 2.22a8, you will be unable to install the Windows Server 2003 SP2 update. See Solution ID: 27815 for more information. If you're using FC Port 2.22a8 and install the Windows Server 2003 SP1 update, the system will not boot after the SP1 installation.
You should install the most current version of FC Port or Storport Miniport that has been qualified by your Emulex HBA service provider before installing SP1 or SP2. If you have installed SP1 with FC Port driver 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installing the driver using AutoPilot Installer (496 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
2.40a2 32-Bit
Size Driver
13.8Mb
File Name
fcportkit_2-40a2-1a.exe
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
FC Port 2.40a2 has been qualified with the Universal WHQL program, which does not support cluster qualifications.
SP1 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
2.40a2 32-Bit
Size Driver
496Kb
File Name
quick_installation.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
FC Port 2.40a2 has been qualified with the Universal WHQL program, which does not support cluster qualifications.
SP1 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installing the driver using AutoPilot Installer (496 KB)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
2.40a2 32-Bit
Size Manual
2.9Mb
File Name
manual.pdf
Information
Qualification: The FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
FC Port 2.40a2 has been qualified with the Universal WHQL program, which does not support cluster qualifications.
SP1 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8, see Solution ID: 17931 for help on how to recover your system.
Installation, Configuration and Troubleshooting (2.58 MB)

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
5.30a2
Size Driver
17.2Mb
File Name
scsiportminiportkit_5-30a2-1n.exe
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Driver kit Base driver, HBAnyware utility 3.0a16 and lputilnt 1.8a19 (18 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2000-2003
Version Driver
5.30a2
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installing the driver using AutoPilot Installer (468 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
5.30a2
Size Manual
4.3Mb
File Name
manual.pdf
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.30a9
Size Driver
24.2Mb
File Name
storportminiportkit_1-30a9-1i.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a19 (24 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.30a9
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.30a9
Size Manual
4.6Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a7
Size Driver
17.9Mb
File Name
storportminiportkit_1-20a7-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.20a7
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a7
Size Manual
3.6Mb
File Name
storport120manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a7
Size Driver
17.9Mb
File Name
storportminiportkit_1-20a7-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.20a7
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a7
Size Manual
3.6Mb
File Name
storport120manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a3
Size Driver
19Mb
File Name
storportminiportkit_1-20a3-1h.exe
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 3.0a9 and lputilnt version 1.8a18 (15.1 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a3
Size Manual
3.7Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a3
Size Driver
19Mb
File Name
storportminiportkit_1-20a3-1h.exe
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 3.0a9 and lputilnt version 1.8a18 (15.1 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a3
Size Manual
3.7Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a3
Size Driver
19Mb
File Name
storportminiportkit_1-20a3-1h.exe
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 3.0a9 and lputilnt version 1.8a18 (15.1 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a3
Size Manual
3.7Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
2.00a12 32/64-bit
Size Driver
21.4Mb
File Name
storportminiportkit_2-00a12-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Base driver, HBAnyware utility 3.3a14 (21.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2003
Version Manual
2.00a12 32/64-bit
Size Manual
984Kb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Storport Miniport Driver Version 2.00 for Windows Server 2003 and Windows Vista

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual HBAnyware Utility
Operating Systems
Windows 2003
Version Manual
2.00a12 32/64-bit
Size Manual
3.1Mb
File Name
hbanyware.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
HBAnyware Utility Version 3.3

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.30a9 32/64-bit
Size Driver
24.2Mb
File Name
storportminiportkit_1-30a9-1e.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a19 (24 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
SMI-S Provider Kit
Operating Systems
Windows 2003
Version Driver
1.30a9 32/64-bit
Size Driver
7.1Mb
File Name
elxsmiprovider1.1.6-2.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
SMI-S HBA Provider, compliant with the SMI-S 1.1.0 specification and certified against the SNIA-CTP v1.1.0.85 suite
Pre-packaged with OpenPegasus CIMOM v2.5.1, as a turnkey SMI-S agent for ease of installation and deployment
(7.18 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.30a9 32/64-bit
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.30a9 32/64-bit
Size Manual
4.6Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a7 32/64-bit
Size Driver
17.9Mb
File Name
storportminiportkit_1-20a7-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
SMI-S Provider Kit
Operating Systems
Windows 2003
Version Driver
1.20a7 32/64-bit
Size Driver
7.1Mb
File Name
elxsmiprovider1.1.6-2.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
SMI-S HBA Provider, compliant with the SMI-S 1.1.0 specification and certified against the SNIA-CTP v1.1.0.85 suite
Pre-packaged with OpenPegasus CIMOM v2.5.1, as a turnkey SMI-S agent for ease of installation and deployment
(7.18 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.20a7 32/64-bit
Size Driver
115Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installing the driver using AutoPilot Installer (498 KB)

Introduction
AutoPilot Installer™ for Emulex® drivers provides installation options that range from a simple
installation with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.

Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.

Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
• Driver-specific utility (elxcfg for FC Port, lputilnt for Storport Miniport and SCSIport Miniport) -
provides a user-friendly interface that allows you to examine, manage and configure local HBAs.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
AutoPilot Installer Introduction
The Emulex AutoPilot Installer is a Fibre Channel HBA installation wizard for Windows. The AutoPilot
Installer installs (or updates) Emulex drivers and utilities and configures HBAs, drivers and utilities.

Prerequisites
• One of the following operating systems:
•Windows Server 2003 running on an x86, x64 or Itanium 64-bit platform.
•For the Emulex Storport Miniport driver, a Microsoft driver update may be required. See the Emulex Web site for the latest update to the Microsoft Storport driver.
•Windows 2000 Server - Service Pack 4 or later is recommended for all installations. Storport Miniport is not compatible with Windows 2000 Server.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a7 32/64-bit
Size Manual
3.6Mb
File Name
storport120manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual HBAnyware Utility
Operating Systems
Windows 2003-2008
Version Manual
2.01a4
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed. Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Full Installation Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.01a4
Size Driver
8.8Mb
File Name
storportminiportkit_2-01a4-1g.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Base driver, HBAnyware utility 3.4a9 (9.21 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Installation Manual
Operating Systems
Windows 2003-2008
Version Manual
2.01a4
Size Manual
114Kb
File Name
quick_installation.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.01a4
Size Manual
1.2Mb
File Name
manual.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Storport Miniport Driver Version 2.10 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.20.006
Size Driver
34.7Mb
File Name
storportminiportkit_2.20.006-1c.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.1a35 (34.7 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Release Notes
Operating Systems
Windows 2003-2008
Version Driver
2.20.006
Size Driver
25Kb
File Name
driver_release_notes.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
New features, fixed issues and known issues in the driver

Release Notes
Date: March 2009 Product: Driver for Linux Version: 8.2.8.14 This document describes the new features, resolved known issues and current known issues associated with this driver build release. For the latest product documentation, go to www.Emulex.com. If you have any questions or require additional information, contact an authorized Emulex Corporation technical support representative.
New Features Driver for Linux 8.2.8.14
1. Supports the LP21000 and LP21002 FCoE adapters. (10 Gb/s capable) 2. Supports the LPe1250, LPe1252, LPe12000 and LPe12002 adapters. (2, 4 and 8 Gb/s capable) 3. Supports the latest HBAnyware utility version 4.1 as part of the master kit. Refer to the HBAnyware Utility User Manual for more information. 4. Supports SuSE Linux Enterprise Server 11. (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) 5. Adds interfaces via the sysfs file system to update speed and topology parameters without requiring link bounce. 6. Supports Power Management Suspend/Resume operations. 7.
Resolved Issues in Driver for Linux 8.2.8.14
Supports MSI-X interrupt handling.
Known Issues in Driver for Linux 8.2.8.14
There are no resolved issues in this driver version.
1. PCI Hot Plug may cause applications to malfunction Performing a PCI Hot Plug may cause the HBAnyware utilities or third party applications that use the Emulex libraries (i.e. HBAAPI) to behave unpredictably or malfunction. Workaround: 1. Stop all applications that are accessing LPFC's HBAAPI interface (HBAnyware utilities or third party applications) before performing PCI Hot Plug of an LPFC HBA. Use the following command to stop the HBAnyware application: #/usr/sbin/hbanyware/stop_hbanyware 2. Perform the PCI Hot Plug of the HBA. 3. Restart the application.
2. Deleting virtual ports or performing a PCI Hot Unplug may result in SCSI errors When you delete a virtual port via the sysfs interface or perform a PCI Hot Unplug of an Emulex HBA, the kernel may report one of the following errors: kernel: Synchronizing SCSI cache for disk kernel: FAILED or SCSI error: return code = 0x00010000. Workaround: These messages do not indicate a functional failure and can be ignored. 3. LILO is not Supported The LILO Boot Loader on i386 and x86_64 architectures is not supported for this driver stream. If the LILO boot loader is used, after the LPFC driver package is installed and upon reboot, an incorrect initial ramdisk is used. The system may not boot correctly. Workaround: Use the GRUB boot loader. This is the default boot loader for most of the Linux distributions. 4. Issue with the LPFC module order in the INITRD_MODULES list. On the SLES10 SP1 system, if another SCSI driver such as aic79xx, is loaded right after the LPFC driver through the initrd image, an interruption might occur in the SCSI mid-layer discovery process on the LUNs connected to LPFC’s Fibre Channel. This interruption can prevent the release of the SCSI discovery reference count and the LPFC driver cannot unload. Workaround: Do not add SCSI drivers right after the LPFC module in the INITRD_MODULES list. 5. The LPFC driver may not finish discovery when two initiator ports are swapped. This causes all devices accessible through one or both of these initiator ports to time out and all I/O to fail. Workaround: Do one of the following:
• When swapping cables replace each cable, one at a time, and allow for discovery to complete before replacing the next cable. To determine if discovery is complete read the "state" sysfs parameter.
• When swapping cables, allow devloss timeout to fire before replacing the cables. (This fails all outstanding I/O.)
6. Deleted virtual ports may appear to be mounted, but are inaccessible. While Emulex provides management utilities to enable you to delete virtual ports, the LPFC driver cannot detect whether devices accessed through a virtual port are in use. You can delete a virtual port even when devices accessible through the virtual port are mounted or when I/O is outstanding to the device. If file systems are mounted on a virtual port and that virtual port is deleted, the file systems still appear to be mounted but are not be accessible. Workaround: Before deleting virtual ports, prepare the system affected by unmounting all the devices accessible through the virtual ports, and verifying that there is no outstanding I/O. 7. 4 Gb/s HBAs in virtualized environments that use Direct I/O or SFPT do not Initialize. Default driver configuration fails to initialize 4 Gb/s HBAs in virtualized environments that use Direct I/O or SFPT(Storage Fixed Pass through) .This may result in a system hang or uninitialized LPFC HBA in Intel VT-d and AMD-V IOMMU systems.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware Release Notes
Operating Systems
Windows 2003-2008
Version Driver
2.20.006
Size Driver
44Kb
File Name
windows_release_notes.pdf
Information
Qualification:
Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2. Note
For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures:
x86
x64
IA64
New features, fixed issues and known issues in the HBAnyware utility

Release Notes
Date: September 2009
Product: HBAnyware® Utility and the Windows Drivers
Version: 4.1
This document describes the known issues associated with this utility build release. For the latest product
documentation, go to www.emulex.com. If you have any questions or require additional information, contact an
authorized Emulex Corporation technical representative.
New Features in HBAnyware Utility Version 4.1
1. Designed for adapter FCoE Initialization Protocol (FIP), subject to subsequent industry testing.
2. Supports CIM interface (operational name, target node WWN and flash contents program ID) for
VMware ESX 4i and VMware ESX 4.0 COS.
3. Virtual port and virtual machine mapping information is displayed.
New Resolved Issues in HBAnyware Utility Version 4.1
1. New - HBAnyware GUI is now available on the IA64 architecture.
It is no longer required to use the HbaCmd command line utility on an IA64 system.
2. All virtual port information did not appear if you manually resized the window.
3. Target information for a virtual port erroneously showed a LUN Masking tab.
4. Using HbaCmd, the change World Wide Name function did not check for physical targets for all inband
ports.
5. Using HbaCmd, the help message for the setauthconfig function erroneously stated that accepted values
were between 0 and 5. The accepted values are between 1 and 5.
6. Using HTTPS, a port number was not used for some functions if the restricthttptoloopback parameter
was set to false.
7. The internal and external loopback diagnostic tests were not available for LP21000 and LP21002
adapters.
Known Issues in HBAnyware Utility Version 4.1
1. The HBAnyware utility GUI application only launches from IBM Director version 5.1.
Workaround: There is no workaround at this time.
2. On LPe1105 adapters, diagnostic beaconing is available only if the adapter does not have VPD.
Workaround: There is no workaround at this time.
3. On LPe12000 adapters, volatile WWN changes may not be supported.
Workaround: Update firmware; see the Emulex Web site for more information.
Caution: Verify the version of OEM firmware to use based on OEM qualifications and support.
4. On LP21000 and LP21002 adapters, FIP mode may need to be disabled to bring a link up.
If you have upgraded to the new CEE firmware that supports FIP and connect the port to a switch with
firmware that does not support FIP, the port’s link will be down. If you plug a loopback plug into an
adapter port with FIP disabled, the link will be down.
Workaround: Disable FIP mode on the adapter port.
5. On Windows Vista platforms, the Add Range of Hosts feature in the HBAnyware utility is not
available.
Workaround: There is no workaround at this time.
6. If the HBAnyware CIM Client is used to access a VMware ESX server, up to 127 LUNs can be
displayed in the discovery-tree (numbered 0 to 126).
Workaround: There is no workaround at this time.
7. Not all adapters may appear in the discovery-tree.
Although the HBAnyware utility provides support for LightPulse adapters that are reprogrammed with
WWPNs outside the typical Emulex range (such as HP’s Virtual Connect for Fibre Channel on the
BladeSystem c-Class platform) not all adapters appear in the discovery-tree.
Workaround: The HBAnyware utility must be deployed across all servers on the SAN, as well as any
other management console used for out-of-band management, so that all adapters appear in the
discovery-tree.
8. Multiport adapter models are represented in the HBAnyware utility discovery-tree as
multiple adapters with a single port icon.
For older mulitport HBA models, the HBAnyware utility displays each port under individual adapter icons
in the discovery-tree. Newer multiport HBA models (LP9802 or later) are represented by a single adapter
icon that branches out to multiple port icons.
Workaround: There is no workaround at this time.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Installation Manual
Operating Systems
Windows 2003-2008
Version Manual
2.20.006
Size Manual
256Kb
File Name
quick_installation.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Storport Miniport Driver User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.20.006
Size Manual
1.2Mb
File Name
manual.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by Windows Sever 2003, Windows Server 2008 and Windows Server 2008 R2.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Tested Architectures: x86, x64, IA64
Storport Miniport Driver Version 2.20 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
HBAnyware User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.20.006
Size Manual
4.6Mb
File Name
hbanyware.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.1

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.01a4 32/64-bit
Size Driver
8.8Mb
File Name
storportminiportkit_2-01a4-1h.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Base driver, HBAnyware utility 3.4a9 (8.83 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Installation Manual
Operating Systems
Windows 2003-2008
Version Manual
2.01a4 32/64-bit
Size Manual
114Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.01a4 32/64-bit
Size Manual
995Kb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Storport Miniport Driver Version 2.01 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual HBAnyware Utility
Operating Systems
Windows 2003-2008
Version Manual
2.01a4 32/64-bit
Size Manual
3.5Mb
File Name
hbanyware.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
HBAnyware Utility Version 3.4

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2008
Version Driver
2.10a7
Size Driver
11.6Mb
File Name
storportminiportkit_2-10a7-1e.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 (11.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Installation Manual
Operating Systems
Windows 2008
Version Manual
2.10a7
Size Manual
114Kb
File Name
quick_installation.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2008
Version Manual
2.10a7
Size Manual
1.2Mb
File Name
manual.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Storport Miniport Driver Version 2.10 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2008
Version Manual
2.10a7
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Driver Kit
Operating Systems
Windows 2008
Version Driver
2.00a12
Size Driver
21.4Mb
File Name
storportminiportkit_2-00a12-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Base driver, HBAnyware utility 3.3a14 (21.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
Quick Installation Manual
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
114Kb
File Name
quick_installation.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
AutoPilot Installer for Windows Server 2003 and Windows Server 2008

Introduction
AutoPilot Installer® for Emulex® drivers provides installation options that range from a simple installation
with a few mouse clicks to custom unattended installations using predefined script files.
AutoPilot Installer is included with Emulex drivers and utilities in Windows executable files that can be
downloaded from the Emulex Web site. Run the distribution executable file to extract all of the software
needed for an installation, then complete the installation using AutoPilot Installer.
AutoPilot Installer allows you to install a driver using any of the following methods:
Hardware-first installation. The host bus adapter (HBA) is installed before the downloaded Emulex
drivers and utilities are installed. See page 3 for this procedure.
Software-first installation. This new installation method allows drivers and utilities to be downloaded
from the Emulex Web site and installed using AutoPilot Installer prior to the installation of any HBAs. The
drivers and utilities are automatically used when HBAs are installed at a later time. See page 4 for this
procedure.
Unattended installation. This new installation method allows you to set up AutoPilot Installer to run
unattended using customized scripts. Unattended installation can be used for both hardware-first and
software-first installations. See the complete Installation section of the driver user manual for more
information.
Note: Complete driver and utilities documentation may be downloaded from the Emulex Web site
(www.emulex.com). Click Support at the top of the Web page and navigate by clicking the appropriate
links.
Updating the Driver Using AutoPilot Installer
If you are currently running an older driver version, use the hardware-first installation procedure to
update your driver. Begin at step 2 to update the driver.
You can also update the Emulex drivers following the manual installation method. See the complete
Installation section of the driver user manual for this procedure.
Distribution Executable File Overview
The distribution executable file is a self-extracting file that includes the following:
• AutoPilot Installer - installs driver and utilities.
• Driver - manages communication and data transfer between applications and I/O devices, using
HBAs as agents.
• HBAnyware utility - performs installation and configuration tasks on remote and local adapters.
Distribution Executable File Procedure
To run the distribution executable file:
1. Download the distribution executable file from the Emulex Web site to your system.
2. Double-click the distribution executable file. A window is displayed with driver version
information and Emulex contact information
3. Click Next to access the Location window or click Cancel to close the window.
4. The default installation location is displayed. Browse to a different location, if desired. Click
Install to continue the installation.
5. The Progress window is displayed. As each task is completed, the corresponding checkbox is
automatically selected.
6. After all tasks are completed, a confirmation window is displayed. The Start AutoPilot Installer
checkbox is automatically selected. To start AutoPilot Installer later, clear this checkbox.
7. Click Finish to close the distribution executable file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
1.2Mb
File Name
manual.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Storport Miniport Driver Version 2.10 for Windows Server 2003 and Windows Server 2008

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LPe11002
Description
User Manual HBAnyware Utility
Operating Systems
Windows 2008
Version Manual
2.00a12
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
HelpDrivers Since March 2000