Available 149 files for Emulex LP9802DC
Select Files
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.11a4
Size Driver
127KB
File Name
he311a4_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Driver Images:
\rel_notes.txt this file you are reading
\DE311A4.PRG Lp8000 EFIBoot version 3.11a4
\CE311A4.PRG Lp9000 EFIBoot version 3.11a4
\HE311A4.PRG Lp9802 EFIBoot version 3.11a4
\QE311A4.PRG Lp850 EFIBoot version 3.11a4
\HE311A4.PRG Lp9802 EFIBoot version 3.11a4
\LE311A4.PRG Lp982 EFIBoot version 3.11a4
\TE311A4.PRG Lp10000 EFIBoot version 3.11a4
\ME311A4.PRG Lp1050 EFIBoot version 3.11a4
\EE311A4.PRG Lp101 EFIBoot version 3.11a4
\BE311A4.PRG Lp11000 EFIBoot version 3.11a4
\JE311A4.PRG Lp1150 EFIBoot version 3.11a4
\ZE311A4.PRG Lpe11000 EFIBoot version 3.11a4
\WE311A4.PRG Lpe1150 EFIBoot version 3.11a4
\ElxCli311a4.efi
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.11a5
Size Driver
129KB
File Name
he311a5_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Driver Images:
\rel_notes.txt the file you are reading
\DE311A5.PRG Lp8000 EFIBoot version 3.11a5
\CE311A5.PRG Lp9000 EFIBoot version 3.11a5
\HE311A5.PRG Lp9802 EFIBoot version 3.11a5
\QE311A5.PRG Lp850 EFIBoot version 3.11a5
\HE311A5.PRG Lp9802 EFIBoot version 3.11a5
\LE311A5.PRG Lp982 EFIBoot version 3.11a5
\TE311A5.PRG Lp10000 EFIBoot version 3.11a5
\ME311A5.PRG Lp1050 EFIBoot version 3.11a5
\EE311A5.PRG Lp101 EFIBoot version 3.11a5
\BE311A5.PRG Lp11000 EFIBoot version 3.11a5
\JE311A5.PRG Lp1150 EFIBoot version 3.11a5
\ZE311A5.PRG Lpe11000 EFIBoot version 3.11a5
\WE311A5.PRG Lpe1150 EFIBoot version 3.11a5
\ElxCli311a5.efi
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.10a7
Size Driver
118KB
File Name
he310a7_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Driver Images:
\310A7.txt The file you are reading
\DE310A7.PRG Lp8000 EFIBoot version 3.10A7
\QE310A7.PRG Lp850 EFIBoot version 3.10A7
\CE310A7.PRG Lp9000 EFIBoot version 3.10A7
\RE310A7.PRG Lp950 EFIBoot version 3.10A7
\HE310A7.PRG Lp9802 EFIBoot version 3.10A7
\LE310A7.PRG Lp982 EFIBoot version 3.10A7
\TE310A7.PRG Lp10000 EFIBoot version 3.10A7
\ME310A7.PRG Lp1050 EFIBoot version 3.10A7
\EE310A7.PRG Lp101 EFIBoot version 3.10A7
\ElxCli310A7.efi
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.11a3
Size Driver
124KB
File Name
he311a3_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Driver Images:
\311A3.txt this file you are reading
\DE311A3.PRG Lp8000 EFIBoot version 3.11a3
\CE311A3.PRG Lp9000 EFIBoot version 3.11a3
\HE311A3.PRG Lp9802 EFIBoot version 3.11a3
\QE311A3.PRG Lp850 EFIBoot version 3.11a3
\HE311A3.PRG Lp9802 EFIBoot version 3.11a3
\LE311A3.PRG Lp982 EFIBoot version 3.11a3
\TE311A3.PRG Lp10000 EFIBoot version 3.11a3
\ME311A3.PRG Lp1050 EFIBoot version 3.11a3
\EE311A3.PRG Lp101 EFIBoot version 3.11a3
\BE311A3.PRG Lp11000 EFIBoot version 3.11a3
\JE311A3.PRG Lp1150 EFIBoot version 3.11a3
\IE311A3.PRG Lp111 EFIBoot version 3.11a3
\ZE311A3.PRG Lpe11000 EFIBoot version 3.11a3
\WE311A3.PRG Lpe1150 EFIBoot version 3.11a3
\YE311A3.PRG Lpe111 EFIBoot version 3.11a3
\ElxCli311a3.efi
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.00a9
Size Driver
115KB
File Name
he300a9_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit System
boot capability through the use of the EFI Shell. This EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61.
The EFIBoot supports:
(1) Multi-Topology : Fabric Point to Point; FC-AL: Private loop and Public
loop.
(2) EFI Protocols : Configuration, Component Name, Diagnostics and
Firmware Update Supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux Supported.
(4) Multi-Device path : Fibre/SCSI Device path Selectable through the Driver
configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs
(8) Multi-Mode : Supported.
(9) Multi-Utility : Setup and Firmware update supported.
Files included in this release:
EFI Byte Code Images:
\readme.txt this file you are reading
\SE300A9.PRG Lp7000 EFIBoot version 3.00a9
\DE300A9.PRG Lp8000 EFIBoot version 3.00a9
\CE300A9.PRG Lp9000 EFIBoot version 3.00a9
\HE300A9.PRG Lp9802 EFIBoot version 3.00a9
\QE300A9.PRG Lp850 EFIBoot version 3.00a9
\RE300A9.PRG Lp950 EFIBoot version 3.00a9
\LE300A9.PRG Lp982 EFIBoot version 3.00a9
\TE300A9.PRG Lp10000 EFIBoot version 3.00a9
\ME300A9.PRG Lp1050 EFIBoot version 3.00a9
\EE300A9.PRG Lp101 EFIBoot version 3.00a9
Native driver (SAL) Code Images:
\readme.txt this file you are reading
\HE300A9.PRG Lp9802 EFIBoot version 3.00a9
\LE300A9.PRG Lp982 EFIBoot version 3.00a9
\TE300A9.PRG Lp10000 EFIBoot version 3.00a9
\ME300A9.PRG Lp1050 EFIBoot version 3.00a9
\EE300A9.PRG Lp101 EFIBoot version 3.00a9
***** Important Note ******
(1) EFIBoot was not activated (Enabled)
If the adapter EFIBoot is not activated (enabled), this adapter will not be
configured. User must use LP6dutil or some other OS Utility to activate (enable)
the EFIBoot in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.10a6
Size Driver
119KB
File Name
he310a6_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Images:
\readme.txt this file you are reading
\SE310A6.PRG Lp7000 EFIBoot version 3.10a6
\DE310A6.PRG Lp8000 EFIBoot version 3.10a6
\CE310A6.PRG Lp9000 EFIBoot version 3.10a6
\HE310A6.PRG Lp9802 EFIBoot version 3.10a6
\QE310A6.PRG Lp850 EFIBoot version 3.10a6
\RE310A6.PRG Lp950 EFIBoot version 3.10a6
\LE310A6.PRG Lp982 EFIBoot version 3.10a6
\TE310A6.PRG Lp10000 EFIBoot version 3.10a6
\ME310A6.PRG Lp1050 EFIBoot version 3.10a6
\EE310A6.PRG Lp101 EFIBoot version 3.10a6
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
EFIBoot
Operating System
Boot Code
Version
3.21a5
Size Driver
208KB
File Name
he321a5_ebc.zip
Observations
Platform: Intel Itanium (64-bit) The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.
EFIBoot supports:
(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.
(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.
(3) Operating System : Windows Server 2003 and Red-Hat Linux
(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.
(5) Multi-Initiators : Up to 128 adapters in a system.
(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.
(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.
(8) Multi-Mode : Peripheral and Volume Set devices are supported.
(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:
EFI Byte Code Driver Images:
\rel_notes.txt this file you are reading
\HE321A5.PRG Lp9802 EFIBoot version 3.21A5
\LE321A5.PRG Lp982 EFIBoot version 3.21A5
\TE321A5.PRG Lp10000 EFIBoot version 3.21A5
\ME321A5.PRG Lp1050 EFIBoot version 3.21A5
\EE321A5.PRG Lp101 EFIBoot version 3.21A5
\BE321A5.PRG Lp11000 EFIBoot version 3.21A5
\JE321A5.PRG Lp1150 EFIBoot version 3.21A5
\ZE321A5.PRG Lpe11000 EFIBoot version 3.21A5
\WE321A5.PRG Lpe1150 EFIBoot version 3.21A5
\YE321A5.PRG Lpe111 EFIBoot version 3.21A5
\ElxCli321A5.efi
***** Important Note ******
(1) EFIBoot was not enabled from loading to system memory:
If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.
(2) EFIBoot Bios was enabled to configure the adapter and No Link:
EFIBoot will wait for 15 seconds/adapter to confirm a link.
(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.
(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.
(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
x86 BootBIOS
Operating System
Boot Code
Version
1.71a0
Size Driver
36KB
File Name
hb171a0.zip
Observations
Platform: Intel (32-bit) The current BIOS provides x86 boot capability through the use of INT13 system
BIOS calls. The BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
(2) Multi-initiators: Up to 64 adapters in a system
(3) Multi-LUNs: Up to 256 LUNs
(4) Multi-boot: Complies with the BIOS Boot Specification (BBS).
(5) EDD (Enhanced Disk Drive Services): Supports both EDD 3.0 and EDD 2.1
depending selection in BIOS Utility.
(6) Boot fail over feature: There are eight boot entries that can be configured.
If the first boot entry fails the system is still able to boot from the
second configured boot entry and so on.
\B171A0.txt this file you are reading
\DB171a0.PRG Lp8000 BIOS version 1.71a0
\CB171a0.PRG LP9000 BIOS version 1.71a0
\HB171a0.PRG LP9802 BIOS version 1.71a0
\TB171a0.PRG LP10000 BIOS version 1.71a0
\BB171a0.PRG LP11000 BIOS version 1.71a0
\ZB171a0.PRG LPe11000 BIOS version 1.71a0
\QB171a0.PRG Lp850 BIOS version 1.71a0
\RB171a0.PRG LP950 BIOS version 1.71a0
\LB171a0.PRG LP982 BIOS version 1.71a0
\MB171a0.PRG LP1050 BIOS version 1.71a0
\JB171a0.PRG LP1150 BIOS version 1.71a0
\YB171a0.PRG LPe111 BIOS version 1.71a0
\EB171a0.PRG LP101 BIOS version 1.71a0
\WB171a0.PRG LPe1150 BIOS version 1.71a0
***** Important Note ******
(1) BIOS downloading
This version of BIOS image has increased size from 44K to 48K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the problem
is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc). Then, download the BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter BIOS is not activated (enabled) by LP6dutil or other O.S. utility,
this adapter would not be configured. Also, there is "No BIOS support" message next
to this adapter in BIOS Utility. User must use LP6dutil or other O.S. Utility to
activate (enable) the BIOS in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
x86 BootBIOS
Operating System
Boot Code
Version
2.00a1
Size Driver
38KB
File Name
hb200a1.zip
Observations
Platform: Intel (32-bit) The adapter boot BIOS provides x86 boot capability through the use of INT13
system BIOS calls. The adapter Boot BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
topologies.
(2) Multi-initiators: The adapter BIOS supports up to 64 Emulex LightPulse
adapters in a system.
(3) Multi-LUNs: The adapter BIOS supports up to 256 LUNs.
(4) Multi-boot: The adapter BIOS complies with the BIOS Boot Specification
(BBS).
(5) EDD (Enhanced Disk Drive Services): The adapter BIOS supports both the
EDD 3.0 and EDD 2.1 specifications depending on the selection in the
adapter BIOS configuration utility.
(6) Boot fail over feature: There are eight boot entries that can be
configured in the adapter BIOS configuration utility. If the first boot
entry fails the system is still able to boot from the second configured
boot entry and so on.
\2.00a1.txt this file you are reading
\DB200a1.PRG Lp8000 adapter boot BIOS version 2.00a1
\CB200a1.PRG Lp9000 adapter boot BIOS version 2.00a1
\HB200a1.PRG Lp9802 adapter boot BIOS version 2.00a1
\TB200a1.PRG Lp10000 adapter boot BIOS version 2.00a1
\BB200a1.PRG Lp11000 adapter boot BIOS version 2.00a1
\QB200a1.PRG Lp850 adapter boot BIOS version 2.00a1
\RB200a1.PRG Lp950 adapter boot BIOS version 2.00a1
\LB200a1.PRG Lp982 adapter boot BIOS version 2.00a1
\MB200a1.PRG Lp1050 adapter boot BIOS version 2.00a1
\JB200a1.PRG Lp1150 adapter boot BIOS version 2.00a1
\EB200a1.PRG Lp101 adapter boot BIOS version 2.00a1
\YB200a1.PRG LPe111 adapter boot BIOS version 2.00a1
\WB200a1.PRG LPe1150 adapter boot BIOS version 2.00a1
\ZB200a1.PRG LPe11000 adapter boot BIOS version 2.00a1
***** Important Note ******
(1) BIOS downloading
The adapter boot BIOS image has increased in size to 48K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the
problem is to download the firmware .AWC or file WITHOUT the BIOS image
(for example: cd393a0.awc) and then download the adapter boot BIOS .PRG file.
Firmware where only .ALL files are available contain firmware only, so the above
precautions do not apply.
(2) BIOS was not activated (Enabled)
If the adapter boot BIOS is not enabled by DOSLPCFG, LP6DUTIL or an Emulex O.S.
configuration utility, the adapter and the drives connected to the adapter
cannot not be configured to be used to boot the system. In addition if there is
a "No BIOS support" message displayed next to this adapter in the adapter BIOS
configuration utility the user must use DOSLPCFG or other Emulex O.S.
configuration utility to enable the adapter boot BIOS in order to allow this adapter
to be used a bootable controller by the host system.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
x86 BootBIOS
Operating System
Boot Code
Version
1.63a2
Size Driver
39KB
File Name
hb163a2.zip
Observations
Platform: Intel (32-bit) The current BIOS provides x86 boot capability through the use of INT13 system
BIOS calls. The BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
(2) Multi-initiators: Up to 64 adapters in a system
(3) Multi-LUNs: Up to 256 LUNs
(4) Multi-boot: Complies with the BIOS Boot Specification (BBS).
(5) EDD (Enhanced Disk Drive Services): Supports both EDD 3.0 and EDD 2.1
depending selection in BIOS Utility.
(6) Boot fail over feature: There are eight boot entries that can be configured.
If the first boot entry fails the system is still able to boot from the
second configured boot entry and so on.
\B163A2.txt this file you are reading
\SB163A2.PRG Lp7000 BIOS version 1.63a2
\DB163A2.PRG Lp8000 BIOS version 1.63a2
\CB163A2.PRG Lp9000 BIOS version 1.63a2
\HB163A2.PRG Lp9802 BIOS version 1.63a2
\TB163A2.PRG Lp10000 BIOS version 1.63a2
\QB163A2.PRG Lp850 BIOS version 1.63a2
\RB163A2.PRG Lp950 BIOS version 1.63a2
\LB163A2.PRG Lp982 BIOS version 1.63a2
\MB163A2.PRG LP1050 BIOS version 1.63a2
Although a specific BIOS file for the LP6000 does not exist, all current
versions of BIOS will scan and process any LP6000 Adapters in the system.
***** Important Note ******
(1) BIOS downloading
This version of BIOS image has increased size from 44K to 48K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the problem
is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc). Then, download the BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter BIOS is not activated (enabled) by LP6dutil or other O.S. utility,
this adapter would not be configured. Also, there is "No BIOS support" message next
to this adapter in BIOS Utility. User must use LP6dutil or other O.S. Utility to
activate (enabled) the BIOS in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
x86 BootBIOS
Operating System
Boot Code
Version
1.70a1
Size Driver
40KB
File Name
hb170a1.zip
Observations
Platform: Intel (32-bit) The current BIOS provides x86 boot capability through the use of INT13 system
BIOS calls. The BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
(2) Multi-initiators: Up to 64 adapters in a system
(3) Multi-LUNs: Up to 256 LUNs
(4) Multi-boot: Complies with the BIOS Boot Specification (BBS).
(5) EDD (Enhanced Disk Drive Services): Supports both EDD 3.0 and EDD 2.1
depending selection in BIOS Utility.
(6) Boot fail over feature: There are eight boot entries that can be configured.
If the first boot entry fails the system is still able to boot from the
second configured boot entry and so on.
B170A1.txt the file you are reading
SB170A1.PRG Lp7000 BIOS version 1.70A1
DB170A1.PRG Lp8000 BIOS version 1.70A1
CB170A1.PRG Lp9000 BIOS version 1.70A1
HB170A1.PRG Lp9802 BIOS version 1.70A1
TB170A1.PRG Lp10000 BIOS version 1.70A1
QB170A1.PRG Lp850 BIOS version 1.70A1
RB170A1.PRG Lp950 BIOS version 1.70A1
LB170A1.PRG Lp982 BIOS version 1.70A1
MB170A1.PRG Lp1050 BIOS version 1.70A1
EB170A1.PRG Lp101 BIOS version 1.70A1
Although a specific BIOS file for the LP6000 does not exist, all current
versions of BIOS will scan and process any LP6000 Adapters in the system.
***** Important Note ******
(1) BIOS downloading
This version of BIOS image has increased size from 44K to 48K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the problem
is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc). Then, download the BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter BIOS is not activated (enabled) by LP6dutil or other O.S. utility,
this adapter would not be configured. Also, there is "No BIOS support" message next
to this adapter in BIOS Utility. User must use LP6dutil or other O.S. Utility to
activate (enabled) the BIOS in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
x86 BootBIOS
Operating System
Boot Code
Version
1.70a3
Size Driver
41KB
File Name
hb170a3.zip
Observations
Platform: Intel (32-bit) The current BIOS provides x86 boot capability through the use of INT13 system
BIOS calls. The BIOS supports:
(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
(2) Multi-initiators: Up to 64 adapters in a system
(3) Multi-LUNs: Up to 256 LUNs
(4) Multi-boot: Complies with the BIOS Boot Specification (BBS).
(5) EDD (Enhanced Disk Drive Services): Supports both EDD 3.0 and EDD 2.1
depending on the selection in the BIOS Utility.
(6) Boot fail over feature: There are eight boot entries that can be configured.
If the first boot entry fails the system is still able to boot from the
second configured boot entry and so on.
\readme.txt this file you are reading
\SB170a3.PRG Lp7000 BIOS version 1.70a3
\DB170a3.PRG Lp8000 BIOS version 1.70a3
\CB170a3.PRG Lp9000 BIOS version 1.70a3
\HB170a3.PRG Lp9802 BIOS version 1.70a3
\TB170a3.PRG Lp10000 BIOS version 1.70a3
\QB170a3.PRG Lp850 BIOS version 1.70a3
\RB170a3.PRG Lp950 BIOS version 1.70a3
\LB170a3.PRG Lp982 BIOS version 1.70a3
\MB170a3.PRG Lp1050 BIOS version 1.70a3
\EB170a3.PRG Lp101 BIOS version 1.70a3
***** Important Note ******
(1) BIOS downloading
This version of BIOS image has increased size from 44K to 48K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the problem
is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc). Then, download the BIOS .prg file.
(2) BIOS was not activated (Enabled)
If the adapter BIOS is not activated (enabled) by LP6dutil or other O.S. utility,
this adapter would not be configured. Also, there is "No BIOS support" message next
to this adapter in the BIOS Utility. User must use LP6dutil or other O.S. Utility
to activate (enabled) the BIOS in order to make this card bootable.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.02a4
Size Driver
206KB
File Name
hu502a4.zip
Observations
contains: x86 BootBIOS 2.00a1, OpenBoot 1.50a9 and EFIBoot 3.11a5 This Universal Boot version 5.02a4 contains:
(1) x86 BootBIOS version 2.00a1
(2) OpenBoot version 1.50a9
(3) EFIBoot version 3.11a5
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\502a4.txt this file you are reading
\HU502a4.PRG LP9802 Universal Boot
\TU502a4.PRG LP10000 Universal Boot
\BU502a4.PRG LP11000 Universal Boot
\ZU502a4.PRG LPe11000 Universal Boot
\elxcli311a5.efi EFI 3.11a5 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.03a0
Size Driver
300KB
File Name
hu503a0.zip
Observations
contains: x86 BootBIOS 2.01a2, OpenBoot 3.01a1 and EFIBoot 4.00a1 This Universal Boot version 5.03a0 contains:
(1) x86 BootBIOS version 2.01a2
(2) OpenBoot version 3.01a1
(3) EFIBoot version 4.00a1
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\503a0.txt this file you are reading
\HU503a0.PRG LP9802 Universal Boot
\TU503a0.PRG LP10000 Universal Boot
\BU503a0.PRG LP11000 Universal Boot
\ZU503a0.PRG LPe11000 Universal Boot
\UU503a0.PRG LPe12000 Universal Boot
\elxcli400a1.efi EFI 4.00a1 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.01a9
Size Driver
203KB
File Name
hu501a9.zip
Observations
contains: x86 BootBIOS 1.70a3, OpenBoot 1.50a8 and EFIBoot 3.11a4 This Universal Boot version 5.01a9 contains:
(1) x86 BootBIOS version 1.70a3
(2) OpenBoot version 1.50a8
(3) EFIBoot version 3.11a4
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU501A9.PRG LP9802 Universal Boot
\TU501A9.PRG LP10000 Universal Boot
\BU501A9.PRG LP11000 Universal Boot
\ZU501A9.PRG LPe11000 Universal Boot
\elxcli311a4.efi EFI 3.11a4 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.02a0
Size Driver
204KB
File Name
hu502a0.zip
Observations
contains: x86 BootBIOS 1.70a3, OpenBoot 1.50a8 and EFIBoot 3.11a5 This Universal Boot version 5.01a9 contains:
(1) x86 BootBIOS version 1.70a3
(2) OpenBoot version 1.50a8
(3) EFIBoot version 3.11a5
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU502A0.PRG LP9802 Universal Boot
\TU502A0.PRG LP10000 Universal Boot
\BU502A0.PRG LP11000 Universal Boot
\ZU502A0.PRG LPe11000 Universal Boot
\elxcli311a5.efi EFI 3.11a5 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.02a1
Size Driver
204KB
File Name
hu502a1.zip
Observations
Contains: x86 BootBIOS 1.71a0, OpenBoot 1.50a9 and EFIBoot 3.11a5 This Universal Boot version 5.02a1 contains:
(1) x86 BootBIOS version 1.71a0
(2) OpenBoot version 1.50a9
(3) EFIBoot version 3.11a5
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\502a1.txt this file you are reading
\HU502a1.PRG LP9802 Universal Boot
\TU502a1.PRG LP10000 Universal Boot
\BU502a1.PRG LP11000 Universal Boot
\ZU502a1.PRG LPe11000 Universal Boot
\elxcli311a5.efi EFI 3.11a5 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.01a0
Size Driver
183KB
File Name
hu501a0.zip
Observations
contains: x86 BootBIOS 1.70a1, OpenBoot 1.41a4 and EFIBoot 3.10a6 This Universal Boot version 5.01a0 contains:
(1) x86 BootBIOS version 1.70a1
(2) OpenBoot version 1.41a4
(3) EFIBoot version 3.10a6
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU501A0.PRG Lp9802 Universal Boot
\TU501A0.PRG Lp10000 Universal Boot
\elxcli310a6.efi EFI 3.10a6 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.01a4
Size Driver
193KB
File Name
hu501a4.zip
Observations
contains: x86 BootBIOS 1.70a3, OpenBoot 1.50a4 and EFIBoot 3.10a7 This Universal Boot version 5.01a4 contains:
(1) x86 BootBIOS version 1.70a3
(2) OpenBoot version 1.50a4
(3) EFIBoot version 3.10a7
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU501A4.PRG Lp9802 Universal Boot
\TU501A4.PRG Lp10000 Universal Boot
\BU501A4.PRG Lp11000 Universal Boot
\elxcli310a7.efi EFI 3.10a7 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.01a7
Size Driver
200KB
File Name
hu501a7.zip
Observations
contains: x86 BootBIOS 1.70a3, OpenBoot 1.50a4 and EFIBoot 3.11a3 This Universal Boot version 5.01a7 contains:
(1) x86 BootBIOS version 1.70a3
(2) OpenBoot version 1.50a4
(3) EFIBoot version 3.11a3
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU501A7.PRG LP9802 Universal Boot
\TU501A7.PRG LP10000 Universal Boot
\BU501A7.PRG LP11000 Universal Boot
\ZU501A7.PRG LPe11000 Universal Boot
\elxcli311a3.efi EFI 3.11a3 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Universal Boot
Operating System
Boot Code
Version
5.00a5
Size Driver
179KB
File Name
hu500a5.zip
Observations
contains: x86 BootBIOS 1.70a1, OpenBoot 1.41a4 and EFIBoot 3.00a9 This Universal Boot version 5.00a5 contains:
(1) x86 BootBIOS version 1.70a1
(2) OpenBoot version 1.41a4
(3) EFIBoot version 3.00a9
For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.
Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:
\readme.txt this file you are reading
\HU500A5.PRG Lp9802 Universal Boot
\TU500A5.PRG Lp10000 Universal Boot
\elxcli.efi EFI 3.00a9 Driver
Universal Boot Load Procedure
The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.
1. "Drvcfg" : EFI based Systems.
Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.
2. LP6DUTIL.EXE : DOS based utility.
Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.
3. LPUTILNT : Windows Miniport Driver.
Please refer to the utility user manual for details on using the above tool.
4. Emulex Configuration Tool : Windows Port Driver.
Please refer to the elxcfg user manual for details on using the above tool.
/*-------------------------------------------------------------------------------*/
/* History */
/*-------------------------------------------------------------------------------*/
Problems Fixed, Features added or Other Updates Since 5.00a4:
-----------------------------------------------------------------------------------
(1) Fixed the drivers had to be connected more than once: can now boot without
connecting through EFI Shell.
(2) Fixed when Firmware Update Protocol functions called, not able to create/
delete partition on targets: can now create/delete partition on targets
Problems Fixed, Features added or Other Updates Since 5.00a1:
-----------------------------------------------------------------------------------
(1) Fixed CR9254: Updated Readme document.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.50a8
Size Driver
35KB
File Name
ho150a8.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\O150a8.txt The file you are reading
\SO150a8.PRG Lp7000 Open Firmware 1.50a8
\DO150a8.PRG Lp8000 Open Firmware 1.50a8
\CO150a8.PRG Lp9000 Open Firmware 1.50a8
\HO150a8.PRG Lp9802 Open Firmware 1.50a8
\TO150a8.PRG Lp10000 Open Firmware 1.50a8
\BO150a8.PRG Lp11000 Open Firmware 1.50a8
\ZO150a8.PRG Lpe11000 Open Firmware 1.50a8
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.50a8 ------------------------
1. The PCI device ID for Lpe11000 in make file wasn't a correct value,
and cause probe process does not find the Fcode image during POST.
The new release fixed this issue by update the correct PCI device
ID in make file. (CR18053)
----------------------- NEW CHANGES 1.50a7 ------------------------
1. The command of report-luns is not setup as external variable in
FCode, this caused the system fail to compile the report-luns into
the RAM during the boot time, and result a boot failure. The new
fix has setup the report-luns as external variable. (CR17926)
----------------------- NEW CHANGES 1.50a6 ------------------------
1. Added the Report LUN before Test Unit Ready command. (CR17835)
2. Added 60ms delay after PRLI and before the first Report Luns command
is sent out. (CR17836)
3. Changed the FCP Port Completion Timeout to 90 seconds for Start/Stop Unit
command, and others for 30 seconds timeout. (CR17837)
4. Fixed the bug on system hangs during "probe-scsi-all", because the timeout
for FCP completion was greater FCP Response. The new fix will be increased
FCP Response Timeout to 100 seconds for Start/Stop Unit command, and others
for 40 seconds timeout. (CR17838)
5. Fixed the bug for mishandle the return value of TUR when FC cable was not
connect properly during boot time and result an error message of
"STACK UNDERFLOW" issue. (CR17839)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.50a9
Size Driver
36KB
File Name
ho150a9.zip
Observations
Platform: SPARC, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\O150a9.txt This file you are reading
\DO150a9.PRG Lp8000 Open Firmware 1.50a9
\CO150a9.PRG Lp9000 Open Firmware 1.50a9
\HO150a9.PRG Lp9802 Open Firmware 1.50a9
\MO150a9.PRG Lp1050 Open Firmware 1.50a9
\TO150a9.PRG Lp10000 Open Firmware 1.50a9
\BO150a9.PRG Lp11000 Open Firmware 1.50a9
\ZO150a9.PRG Lpe11000 Open Firmware 1.50a9
\DO150a9.bin Lp8000 Open Firmware 1.50a9 for bin file
\CO150a9.bin Lp9002 Open Firmware 1.50a9 for bin file
\HO150a9.bin Lp9802 Open Firmware 1.50a9 for bin file
\MO150a9.bin Lp1050 Open Firmware 1.50a9 for bin file
\TO150a9.bin Lp10000 Open Firmware 1.50a9 for bin file
\BO150a9.bin Lp11000 Open Firmware 1.50a9 for bin file
\ZO150a9.bin Lpe11000 Open Firmware 1.50a9 for bin file
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.50a9 ------------------------
1. In some special array, Fcode in loop mode display incorrect LUNs on
show-children or probe-scsi-all command. The new fix takes care this
issue by adding the SCSI inquiry command before calling the show-luns
command in show-children, and set the numbers of retry on busy status
to limits of 10 times. (CR20261)
2. If the search eVPD data (V2) is located near at the end of 108 bytes in
the VPD field, thus sometimes can cause fails to display the whole string
of eVPD (V2) data. To fix this display VPD data on V2 field issue, the
new fix changed the VPD dumped entry index to 20*n bytes, and change
the VPD search area to 28 bytes, this can cover the whole maximum length
of 80 bytes on V2 data field. (CR20262)
3. Fcode fails to issue a retry command with a check condition if the sense
data returning a response code 71h (deffered errors). The new fix added
support deferred error (71h & 73h) and current error (72h) on sense data
returned to returning check condition status, this will continue apply retry
command. (CR20264)
4. In some blade server, after "scan", Fcode issue a "unmap-regs" at "close",
then re-open again to "check" the FC device for setting up the FC targets
into the SMS boot menu, somehow the re-maping FC device into the
system virtual address spaces function is not working properly, and
cause the system not able to recognize any FC devices during "check".
The new fix removed the "unmap-regs" call at the "close", and system can
continue complete setup the FC targets into the boot menu, and this special
condition only apply to some systems only. (CR19585)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.41a4
Size Driver
27KB
File Name
ho141a4.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\readme.txt This file you are reading
\SO141a4.PRG Lp7000 Open Firmware 1.41a4
\DO141a4.PRG Lp8000 Open Firmware 1.41a4
\CO141a4.PRG Lp9000 Open Firmware 1.41a4
\HO141a4.PRG Lp9802 Open Firmware 1.41a4
\TO141a4.PRG Lp10000 Open Firmware 1.41a4
\SO141a4.img Lp7000 Open Firmware 1.41a4 for image file
\DO141a4.img Lp8000 Open Firmware 1.41a4 for image file
\CO141a4.img Lp9002 Open Firmware 1.41a4 for image file
\HO141a4.img Lp9802 Open Firmware 1.41a4 for image file
\TO141a4.img Lp10000 Open Firmware 1.41a4 for image file
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.41A4 ------------------------
1. The "ct-req" info. was erased by adding the "memory erase" function
before "ct-req" dma-free in previous release which cause the fcode
fail to see the target in fabric mode, the new fixed is removed the
"memory erase" function from "ct-req" before the dma-free. (CR11852)
----------------------- NEW CHANGES 1.41A3 ------------------------
1. In some system server, during the DR, there is a WARNING message
with memory leaked issue. The new release corrected this issue by
adding additional memory erase functions to set to 0 all the previously
obtained dma memory before the fcode released out the dma and virtual
address mappings by dma-map-out and dma-free. (CR11350 & CR11351)
2. In the universal boot code, during the boot time, there is an
warning message "Warning: Fcode sequence resulted in a net stack
depth change of 1", the new release fixed issue by remove some
unnecessarily call function in the fcode. (CR11538)
3. In some system, if the HBA was fail on the initialization by pulling
or remove the cable during boot time, the .properties command in the
ok prompt will display the wrong mode number of the HBA. The new
fixed will not show any model number of the HBA in this scenario. If
the system initize the HBA properly, it will display the correct
model number of the HBA. (CR9842)
4. Added the new instruction for using the alpa to set the boot id in
readme file. (CR9781)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.50a4
Size Driver
32KB
File Name
ho150a4.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\O150A4.txt The file you are reading
\SO150a4.PRG Lp7000 Open Firmware 1.50a4
\DO150a4.PRG Lp8000 Open Firmware 1.50a4
\CO150a4.PRG Lp9000 Open Firmware 1.50a4
\HO150a4.PRG Lp9802 Open Firmware 1.50a4
\MO150a4.PRG Lp1005 Open Firmware 1.50a4
\TO150a4.PRG Lp10000 Open Firmware 1.50a4
\BO150a4.PRG Lp11000 Open Firmware 1.50a4
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding (binding a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.50a4 ------------------------
1. Added the new link speed selection feature that uses the command
"set-link-speed" to select the desired link speed. The new link
speed now can support up to 4 Gigabaud, and the default link speed
is Auto Select. (CR16047)
2. Added the new Fcode Diag Switch feature that uses the command
"set-fdiag-switch" to turn the diag switch on/off. If the Diag
switch is on, the detail debug error message will be print out
during POST or boot time if there is any link/boot failure.(CR16048)
3. Bug fixed where HBA did not retry under a LOGO response and caused
fabric boot failure. (CR15707)
4. Bug fixed where HBA did not retry the START/STOP command on a SCSI
Queue Full response and caused fabric boot failure. The new number
of retries for Queue Full is up to 10 times and then give up.(CR16049)
5. Changed the new number of retry condition for SCSI Busy to retry
forever. (CR16050)
6. Added the host "port-wwn" and "node-wwn" of the HBA into the reg
property during POST time which was required by system to
allow to collect the Host wwpn/wwnn info during boot.(CR16051)
7. Fixed the bug on fail to report fcp-lun on software BOOT format.
(CR16052)
8. Added the new feature "show-wwpn-child". User can use this command
to show the LUNs target with the desired WWPN only instead of all
WWPNs and LUNs.(CR16053)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.41a0
Size Driver
25KB
File Name
ho141a0.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
readme.txt The file you are reading
SO140a0.PRG Lp7000 Open Boot 1.40a0
DO140a0.PRG Lp8000 Open Boot 1.40a0
CO140a0.PRG Lp9000 Open Boot 1.40a0
HO140a0.PRG Lp9802 Open Boot 1.40a0
TO140a0.PRG Lp10000 Open Boot 1.40a0
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.40A0 ------------------------
1. In some server system, the default "ihandle/devname" is not in the
OBP library, and that will issue a wrong device path in devalias.
In this release, the new function "devname-path" will substate the
word "ihandle/devname", and makes correct device path in devalias.
----------------------- NEW CHANGES 1.33A2 ------------------------
1. Update the Emulex Copyright.
----------------------- NEW CHANGES 1.33A1 ------------------------
1. Add the reset behavior for error attention 0x04 during runtime.
----------------------- NEW CHANGES 1.33A0 ------------------------
1. Add firmware requested reset behavior for the Error Attention 0x04.
2. Change the return stack value on fcp-luns to "0 0" when fcp-luns
command returns with an error.
3. Change the display LP9000 adapter on boot banner to LP9002.
----------------------- NEW CHANGES 1.32A0 ------------------------
1. Add the default topology mode without using "set-default-mode", and
the default topology mode is loop first, then point-to-point.
2. Set the default machine code into SUN machine instead of IBM. This
setting can takes care some of the SUN compatible machine. Also
change the default device-path for SUN and IBM machine.
3. Able to boot with the new lp9802 HBA.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.41a2
Size Driver
26KB
File Name
ho141a2.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
readme.txt The file you are reading
SO141a2.PRG Lp7000 Open Firmware 1.41a2
DO141a2.PRG Lp8000 Open Firmware 1.41a2
CO141a2.PRG Lp9000 Open Firmware 1.41a2
HO141a2.PRG Lp9802 Open Firmware 1.41a2
TO141a2.PRG Lp10000 Open Firmware 1.41a2
SO141a2.img Lp7000 Open Firmware 1.41a2 for image file
DO141a2.img Lp8000 Open Firmware 1.41a2 for image file
CO141a2.img Lp9002 Open Firmware 1.41a2 for image file
HO141a2.img Lp9802 Open Firmware 1.41a2 for image file
TO141a2.img Lp10000 Open Firmware 1.41a2 for image file
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.41A2 ------------------------
1. In some system server, the HBA adapter does not get initialized
when dyanmic reconfiguration is initiated on entire PCI I/O assemby,
and shows the error message " Segmentation Fault" by the system's
Fcode interpreter. The cause of this issue was the Forth word
"erase" can't use in device memory on some system server during DR,
"erase" should only be used on system memory. This release fixed
the issue by replace and use "do-loop" to zero out device memory
area instead. (CR9683)
2. There is an issue regarding the variable declaration, because the
variable of "#lun-a0" was declare as CONSTANT, if some system's
Fcode interpreter try to change or modified this variable during
program execution after it is declared, it can corrupts the Open
Firmware dictionary entry with error message "default catch".
This release fixed the issue by replace the "CONSTANT" to "VALUE"
for declared the variable of (#lun-a0) in fcp-luns. (CR9717)
----------------------- NEW CHANGES 1.41A1 ------------------------
1. When bring up some system server, there is an error message "Cannot
Configure Port" and cause fail to config the HBA port, The cause of
this failure was Fcode need issue a reset command before initialize
the HBA. (CR9064)
2. In some system server, when system comes up from cool boot, there is
an error message "Cannot Initialize Port", and cause fail to config.
The new fix is add mailbox restart command before reset and config
the HBA. (CR9400)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.33a1
Size Driver
25KB
File Name
ho133a1.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
This README applies to the following boot products:
SO133A1.PRG Lp7000 Open Boot 1.33A1
DO133A1.PRG Lp8000 Open Boot 1.33A1
CO133A1.PRG Lp9002 Open Boot 1.33A1
HO133A1.PRG Lp9802 Open Boot 1.33A1
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
--------------------------------------------------------------
----------------------- NEW CHANGES 1.32A0 ------------------------
1. Add the default topology mode without using "set-default-mode", and
the default topology mode is loop first, then point-to-point.
2. Set the default machine code to SUN machine instead of IBM. This
setting can takes care some of the SUN compatible machines. Also
change the default device-path for SUN and IBM machines.
3. Now able to boot with the new LP9802 Pegasus chipset.
----------------------- NEW CHANGES 1.33A0 ------------------------
1. Add firmware requested reset behavior for Error Attention 0x04.
2. Change the return stack value on fcp-luns to "0 0" when fcp-luns
command returns with an error.
3. Change the display LP9000 adapter on boot banner to LP9002.
----------------------- NEW CHANGES 1.33A1 ------------------------
1. Add the reset behavior for error attention 0x04 during runtime.
----------------------------------------------------------------------
----------------------------------------------------------------------
1. Open Boot Firmware Update Procedure
The Open Boot is loaded in the same way as a firmware update is
performed and is distributed as a .PRG file. It could download
through DOS based Lp6util if the adapter is first installed in a PC.
The procedure under DOS LP6DUTIL version 8.x is as follows:
(1) Option 5 Maintenance
(2) Select 1 Update Firmware.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
1.40a0
Size Driver
25KB
File Name
ho140a0.zip
Observations
Platform: SPARC, AIX, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
readme.txt The file you are reading
SO140a0.PRG Lp7000 Open Boot 1.40a0
DO140a0.PRG Lp8000 Open Boot 1.40a0
CO140a0.PRG Lp9000 Open Boot 1.40a0
HO140a0.PRG Lp9802 Open Boot 1.40a0
TO140a0.PRG Lp10000 Open Boot 1.40a0
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 1.40A0 ------------------------
1. In some server system, the default "ihandle/devname" is not in the
OBP library, and that will issue a wrong device path in devalias.
In this release, the new function "devname-path" will substate the
word "ihandle/devname", and makes correct device path in devalias.
----------------------- NEW CHANGES 1.33A2 ------------------------
1. Update the Emulex Copyright.
----------------------- NEW CHANGES 1.33A1 ------------------------
1. Add the reset behavior for error attention 0x04 during runtime.
----------------------- NEW CHANGES 1.33A0 ------------------------
1. Add firmware requested reset behavior for the Error Attention 0x04.
2. Change the return stack value on fcp-luns to "0 0" when fcp-luns
command returns with an error.
3. Change the display LP9000 adapter on boot banner to LP9002.
----------------------- NEW CHANGES 1.32A0 ------------------------
1. Add the default topology mode without using "set-default-mode", and
the default topology mode is loop first, then point-to-point.
2. Set the default machine code into SUN machine instead of IBM. This
setting can takes care some of the SUN compatible machine. Also
change the default device-path for SUN and IBM machine.
3. Able to boot with the new lp9802 HBA.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
3.00a2
Size Driver
40KB
File Name
ho300a2.zip
Observations
Platform: SPARC, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\readme.txt This file you are reading
\SO300a2.PRG Lp7000 Open Firmware 3.00a2
\DO300a2.PRG Lp8000 Open Firmware 3.00a2
\CO300a2.PRG Lp9000 Open Firmware 3.00a2
\HO300a2.PRG Lp9802 Open Firmware 3.00a2
\MO300a2.PRG Lp1005DC Open Firmware 3.00a2
\TO300a2.PRG Lp10000 Open Firmware 3.00a2
\BO300a2.PRG Lp11000 Open Firmware 3.00a2
\ZO300a2.PRG Lpe11000 Open Firmware 3.00a2
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 3.00a2 ------------------------
1. Fixed the issue if the len size of the decode-unit on device path /fp
is large than 2 digits, the decode-unit is fails to convert text
unit-string, and cause system is not bootable, and boot command
disabled. (CR25215)
2. Fixed the issue on some systems the probe-scsi-all command fails
if the HBA has no link. (CR25036)
3. In PCI Configuration Register there is a bit to control the HBA
bus master capability (BME). In dual channel HBA when one of the
Bus Master Enable bit is cleared can cause other channel HBA DMA
to be stuck, and cause system hangs or failure during the boot
time. This release takes care this issue by set the BME bit on
forever. (CR24911)(CR25005)
4. If there is some unsolicited frame coming from the switch or service
provider, and the Boot code is not configure to response the FC-CT
Unsolicited, this can cause the system hangs during boot or scan targets.
In order not to sent any FC-CT request, the new release removed the
mailbox config_ring command. (CR25233)
5. Changed the display format on Fcode version number in .properties screen
from ASCII to Hex for IBM machine. (CR25617)
6. Update the copyright date from .properties command. (CR24936)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
OpenBoot
Operating System
Boot Code
Version
3.01a1
Size Driver
40KB
File Name
ho301a1.zip
Observations
Platform: SPARC, PowerPC This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 255).
\readme.txt This file you are reading
\DO301a1.PRG Lp8000 Open Firmware 3.01a1
\CO301a1.PRG Lp9000 Open Firmware 3.01a1
\HO301a1.PRG Lp9802 Open Firmware 3.01a1
\MO301a1.PRG Lp1050 Open Firmware 3.01a1
\TO301a1.PRG Lp10000 Open Firmware 3.01a1
\BO301a1.PRG Lp11000 Open Firmware 3.01a1
\ZO301a1.PRG Lpe11000 Open Firmware 3.01a1
\UO301a1.PRG LPe12000 Open Firmware 3.01a1
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.
(1) This procedure assumes there is already a 'local' boot disk.
(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.
(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).
(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.
----------------------------------------------------------------------
----------------------- NEW CHANGES 3.01a1 ------------------------
1. Some variable in the scsidisk file was create as local variable, and
cause system fail to boot with "Last Trap: Illegal Instruction" error
message. The new fixed by change some variables to external variable
instead of local variable. (CR27598)
----------------------- NEW CHANGES 3.01a0 ------------------------
1. Support 8Gb/s HBA.
----------------------- NEW CHANGES 3.00a2 ------------------------
1. Fixed the issue if the len size of the decode-unit on device path /fp
is large than 2 digits, the decode-unit is fails to convert text
unit-string, and cause system is not bootable, and boot command
disabled. (CR25215)
2. Fixed the issue on some systems the probe-scsi-all command fails
if the HBA has no link. (CR25036)
3. In PCI Configuration Register there is a bit to control the HBA
bus master capability (BME). In dual channel HBA when one of the
Bus Master Enable bit is cleared can cause other channel HBA DMA
to be stuck, and cause system hangs or failure during the boot
time. This release takes care this issue by set the BME bit on
forever. (CR24911)(CR25005)
4. If there is some unsolicited frame coming from the switch or service
provider, and the Boot code is not configure to response the FC-CT
Unsolicited, this can cause the system hangs during boot or scan targets.
In order not to sent any FC-CT request, the new release removed the
mailbox config_ring command. (CR25233)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.91a1
Size Driver
332KB
File Name
hd191a1.zip
Observations
Compatibility:
This kit supports the LP9802 PCI host adapter.
This kit includes the following files:
README.TXT The file you are reading
HD191A1.ALL All firmware components, no boot
LP6DUTIL.EXE DOS-based diagnostic utility 9.3a4
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a4
Several files, such as the .DWC file and .CFL files, have been
eliminated from this kit in order to simplify the update process and
ensure correct operation of the updated HBA.
Changes and Corrections:
-- Changes and corrections between 1.91a1 and 1.91a0:
Corrected an uninitialized variable in the Linux key check. (CR 14533)
Changed XRI buffer return behavior so that buffers are normally
returned without error in cases where the exchange has completed.
(CR 13413)
Improved handling of stale frames from completed exchanges so they
can no longer affect new exchanges. (CR 14479)
-- Changes and corrections between 1.91a0 and 1.90a4:
Ensure that resynch happens after link down. This remedies a problem
encountered only when connecting test equipment to the HBA. (CR 10135,
13634, 14443)
Ensure that we have at least one credit when doing REG LOGIN to
fabric port. (CR 12460, 12466, 14357)
Response to an unsolicited IP broadcast frame was corrected to comply
with FC spec. (CR 11019, 14596)
Interrupt handling of a PCI abort has been corrected so that the rare
out-of-order interrupt is no longer regarded as a cause for resetting
the HBA. (CR 11169, 13635, 14052, 14449)
Improved response and handling of Expansion ROM access requests
to enhance and ensure correct operation.
(CR 11170, 12155, 12354, 14361)
Allow use of a revised FLASH memory chip [Intel J3 rev C].
(CR 12213, 13078, 14451)
Ensure that no frames waiting for resources are accidentally released
on to the link when killing exchanges. (CR 12183, 13630, 14591, 14447)
Corrected a problem where the download of corrupted firmware would
return the proper error, but refuse any further commands.
(CR 13241, 14584)
Improved handling of the RESET_RING command to completely initialize
the ring and no longer return an unnecessary response.
(CR 13325, 13631, 13632, 13374, 14446, 14450, 14589)
Improved response to give priority to outstanding ACKs when in
target mode under heavy load. (CR 13327, 13633, 14445)
Added code to correctly process and count error counter overflows.
(CR 13328, 13629, 14444)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.91a5
Size Driver
334KB
File Name
hf191a5.zip
Observations
Compatibility:
This kit supports the LP9802DC PCI host adapter.
This kit includes the following files:
README.TXT The file you are reading
HF191A5.ALL All firmware components, no boot
LP6DUTIL.EXE DOS-based diagnostic utility 9.3a6
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a6
Changes and Corrections:
-- Changes and corrections between 1.91a5 and 1.91a4:
Ensure proper DMA behavior upon channel reset. (CR 19091, 19096)
Pre-initialize configuration region to avoid errors if host reads it
before the initial configuration is complete. (CR 19177, 19187, 19188)
-- Changes and corrections between 1.91a4 and 1.91a3:
Several issues with FLASH access during reset of only one port have been
eliminated by synchronizing the flash access speed of both ports.
(CR 17472, 17475, 17539, 17542, 17625, 17626, 17647, 17648, 18212,
18213, 18307)
An exceptionally rigorous test produced a timeout where the rings other
than ring 0 were ignored. The firmware has been corrected to check all
four rings. (CR 15952, 16262, 16279, 16280, 16281, 16282, 16283)
Improved handling of queued data from tape. Recovery of CRC errors
no longer indirectly trigger an abort on slow PCI environments.
(CR 17410, 17510, 17520, 17608, 17610, 17633, 17634, 17635, 18280,
18343)
Changed handling of dropped FCP-2 tape data frames. Upon detecting a
missing frame, the firmware now automatically requests a retransmission
from the drive. (CR 14851, 15184, 16975, 18329)
The firmware now correctly handles intentional IOCB starvation.
(CR 16818, 16873, 16972, 17211)
An I/O timeout during tape operation was eliminated by delaying
processing of any FCP2 errors during discovery. (CR 17363, 18287, 18288)
Improved handling of linked FCP commands in order to avoid timeouts.
(CR 15602, 16114)
Implemented a workaround to avoid a hardware DMA overrun condition.
(CR 17780, 17834, 17908)
To avoid buffer deadlocks, the HBA now completes any existing DMA for
an exchange prior to allocating more free buffers. (CR 16862, 16874,
16973, 18347)
Dump command now correctly dumps memory above 1MB. (CR 18374)
Improved buffer handling logic during error conditions to avoid aborted
exchanges. (CR 17701, 18291, 18292, 18349)
Improved handling of erroneously-sized ECHO responses. (CR 18330,
18332, 18333)
The HBA now transmits all outstanding ACKs before processing any
previously blocked data. (CR 16354, 18334, 18335)
The transmit queue is now restarted after ACK handling to avoid a
transmit hang in Class 2. (CR 18362, 18363, 18364)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.81a1
Size Driver
451KB
File Name
hd181a1.zip
Observations
Compatibility:
This kit supports the LP9802 PCI host adapter.
This kit includes the following files:
README.TXT The file you are reading
HD181A1.ALL All firmware components, no boot
HD181A1.DWC Functional firmware, no kernel/loader, no boot
HDEFAULT.CFL Configuration file for restoring default PCI_ID
HFPLUS1.CFL Configuration file to allow PCI ID = F981
HFPLUS2.CFL Configuration file to allow PCI ID = F982
FDEFPEG.CFL Configuration file to allow PCI ID = 1AE5
LP6DUTIL.EXE DOS-based diagnostic utility 9.0A13
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.0A13
Changes and Corrections:
-- These are the changes since 1.01A2, which was the previous
-- released version for the Pegasus HBA product line.
Provided merged code base modules for Thor and Pegasus products.
(CR 8569, 8570, 8571)
Several changes were implemented to more effectively address the HBA
reset response required by Power Management Reset and Dynamic Host
Reconfiguration. Modified PCI and PCIX setup routines, allowed earlier
access to expansion ROM, and improved FLASH access routines, all of which
provide faster access after an HBA reset.
(CR 8592, 8634, 8635, 9398, 7097, 6961, 6941, 5204, 8637, 8638, 7982)
Development, desk checks and source code review found possible problems
which had no reported instances of failure.
(CR 8529, 8491, 8789, 8790, 8791, 8434, 9394, 9320, 9170, 8439, 8489, 8490,
8176, 8474, 8475)
Added or refined features as per customer request.
(CR 8473, 8222, 8472, 8174, 8478, 8479)
Improved handling of parity error with host pointers in HBA SLIM memory.
(CR 8435)
Implemented a method recommended by the chip manufacturer to prevent a
rare occurrance of a single bit change in FLASH memory during repeated
read and reset of the HBA. (CR 8630)
Released buffers if exchange aborted during frame reception, to avoid
buffer credit stall. (CR 9239)
Improved handling of exchange buffers in the process of being transmitted
when an abort is received. (CR 9240)
To break an occasional hang during negotiation in p2p-first autotopology
mode with a switch, we now toggle the receiver after 4 seconds of
attempted negotiation and force p2p mode. (CR 8946, 8927, 9231)
Fixed detection of incorrectly set FCTL_RECIPIENT bit. HBA behavior now
fits the spec by dropping the frame. (CR 8175, 8476, 8477)
Corrected target mode handling of data sequences with no F_CTL End
Sequence. (CR 8530, 8531, 8532)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.90a4
Size Driver
465KB
File Name
hd190a4.zip
Observations
Compatibility:
This kit supports the LP9802 PCI host adapter.
This kit includes the following files:
README.TXT The file you are reading
HD190A4.ALL All firmware components, no boot
HD190A4.DWC Functional firmware, no kernel/loader, no boot
HDEFAULT.CFL Configuration file for restoring default PCI_ID
HFPLUS1.CFL Configuration file to allow PCI ID = F981
HFPLUS2.CFL Configuration file to allow PCI ID = F982
FDEFPEG.CFL Configuration file to allow PCI ID = 1AE5
LP6DUTIL.EXE DOS-based diagnostic utility 9.2a4
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.2a4
Changes and Corrections:
-- Changes and corrections between 1.90a0 and 1.81a1.
Added or refined features as per customer requests.
(CR 8663, 8636, 9182, 10120, 10574, 9811, 9864)
Corrected an internal word misalignment so that the SLI-1 mailbox
command returns the firmware revision data properly. (CR 9390)
Improved I/O transaction performance. (CR 10663)
Corrected a switch login problem in point-to-point-only mode with certain
transceivers. (CR 9406)
Change made to recognize a CLOSE in point-to-point mode. This corrects a
deadlock problem in OldPort mode when connecting to a switch.
(CR 9438)
Corrected an HBA hang / mailbox timeout problem after a disconnect with
an HP-UX system. (CR 9682, 10585)
Corrected an RPI handling problem between the HP-UX driver and firmware
when cables are swapped between two different HBAs. (CR 9714)
The firmware now accommodates the use of ST FLASH memory parts.
(CR 10089)
Corrected a rare condition where an incorrect IOCB could be returned to
the host if the exchange is aborted before the buffer list has been queued
by the host. (CR 10117, 10058)
Corrected a rare instance where the wrong exchange is aborted and the
IO_TAG is eventually reused. The abort is now matched to the correct
exchange by validating the IO_TAG. (CR 10118, 9809)
Corrected a response problem with an RRQ timeout. ABTS is now sent
if the RRQ to the host times out. (CR 10119, 9364)
Corrected the reason and explanation codes given to the tape drive
in an LS_RJT response to REC ELS. This allows the Solaris host to
retry the command. (CR 10121, 9489)
Improved resource depletion handling for small transfers.
(CR 10124, 9274)
Corrected a problem where a raid array would not be seen by two servers
that were connected into the same switch. (CR 10126, 10461, 9907)
FCP recovery has been improved by including the proper reason codes
for tapes. (CR 10173, 10575, 9530)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.00a4
Size Driver
440KB
File Name
hd100a4.zip
Observations
Compatibility:
This kit supports the LP9802 series of PCI host adapters.
This kit includes the following files:
README.TXT The file you are reading
HD100A4.ALL All firmware components, no boot
HD100A4.DWC Functional firmware, no kernel/loader, no boot
HDEFAULT.CFL Configuration file for restoring default PCI_ID
HFPLUS1.CFL Configuration file to allow PCI ID = F981
HFPLUS2.CFL Configuration file to allow PCI ID = F982
FDEFAULT.CFL Configuration file to allow PCI ID = 1AE5
LP6DUTIL.EXE DOS-based diagnostic utility 9.0A10
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.0A10
Changes and Corrections:
PLEASE NOTE:
This firmware is not backward-compatible with Emulex legacy HBAs.
This product has significant changes in file naming and firmware
download methods. The HBA internal firmware structure is unlike
the traditional Emulex Light Pulse products.
The traditional .AWC files have been replaced with the
.ALL file. Downloading this file no longer indiscriminately
erases or resets any previously installed boot program
settings. Please see "Cautions and Warnings" for details.
The LP6DUTIL utility version 9.0a10 represents a departure from
the traditional command-line structure, and it now uses a
graphical-type user interface. It also uses a different method
of implementing scripts than did earlier LP6DUTIL versions.
Please read the LP6DUTIL document file for more information.
-- Changes in firmware version 1.00A4: --
Added code to enter old-port P2P mode in the manner required by
the Pegasus products. (CR 4966)
Added VPD compliance with PCI spec 2.2. The vendor-specific
method of VPD access has not been affected. (CR 5109, 5110,
6179)
Corrected an error which would cause the board to hang in
certain situations when accessing VPD or when the max tx dma
interrupt was set. (CR 5165)
A zero-length BDE is now processed without issuing an error.
(CR 5236)
Correct loop map information is now assured on READ_LA mailbox
command. (CR 5264)
ELS responses for firmware-created ELS requests (e.g. echo) were
corrected. (CR 5267)
Correct exchange ID is now verified when RRQ is received. (CR 5295)
The possibility of generating an extra LIP phase during loop init
was eliminated. (CR 5296)
Added interlocks to prevent subsequent mailbox commands from being
accepted before completion of the current mailbox command.
(CR 5297)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.01a2
Size Driver
446KB
File Name
hd101a2.zip
Observations
Compatibility:
This kit supports the LP9802 PCI host adapter.
This kit includes the following files:
README.TXT The file you are reading
HD101A2.ALL All firmware components, no boot
HD101A2.DWC Functional firmware, no kernel/loader, no boot
HDEFAULT.CFL Configuration file for restoring default PCI_ID
HFPLUS1.CFL Configuration file to allow PCI ID = F981
HFPLUS2.CFL Configuration file to allow PCI ID = F982
FDEFPEG.CFL Configuration file to allow PCI ID = 1AE5
LP6DUTIL.EXE DOS-based diagnostic utility 9.0A13
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.0A13
Changes and Corrections:
PLEASE NOTE:
This firmware is not backward-compatible with Emulex legacy HBAs.
This product has significant changes in file naming and firmware
download methods. The HBA internal firmware structure is unlike
the traditional Emulex Light Pulse products.
The traditional .AWC files have been replaced with the .ALL file.
Downloading an .ALL or .DWC file no longer erases or resets any
previous boot code or settings. Please see "Known Issues"
for details.
The LP6DUTIL utility version 9.0a13 represents a departure from
the traditional command-line structure, and it now uses a
graphical-type user interface. It also uses a different method
of implementing scripts than did earlier LP6DUTIL versions.
Please read the LP6DUTIL document file for more information.
-- Changes in firmware version 1.01a2: --
Increase "wait for active" timeout in point-to-point mode to allow more
time for optical module sync-up.
(CR 8206, 8208)
-- Changes in firmware version 1.01a1: --
Added support for out-of-order ACKs within a range of 1 to 7 from the
expected sequence count. (CR 5263, 5266, 6792)
On rare occasion (once every 200 to 4000 attempts), two Pegasus HBAs
would get stuck in sync while trying to bring up the link between them.
Added a 250 mS timeout and a means to force a retry by both HBAs.
(CR 7704,7705)
A method of handling internal buffers caused a problem when changing
to another port on a switch. We now insure that a change in topology
triggers proper buffer handling for this situation. (CR 6895, 7706)
Added a timeout function to avoid a possible stall waiting for ACK1.
(CR 7547, 7730)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware
Operating System
Firmware
Version
1.00a2
Size Driver
438KB
File Name
lp9802_100a2.zip
Observations
Compatibility:
This kit supports the LP9802 series of PCI host adapters.
This kit includes the following files:
README.TXT The file you are reading
HD100A2.ALL All firmware components, no boot
HD100A2.DWC Functional firmware only (no kernel/loader, no boot)
HDEFAULT.CFL Configuration file for restoring PCI_ID to default
HFPLUS1.CFL Configuration file to allow PCI ID = F981
HFPLUS2.CFL Configuration file to allow PCI ID = F982
FDEFAULT.CFL Configuration file to allow PCI ID = 1AE5
LP6DUTIL.EXE DOS-based diagnostic utility 9.0A9
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.0A9
Changes and Corrections:
This is the first release of firmware for this product.
Versions prior to this one were used for internal prototype test
runs, and were not formally released.
PLEASE NOTE:
This firmware is not backward-compatible with Emulex legacy HBAs.
This product has significant changes in file naming and firmware
download methods. The HBA internal firmware structure is unlike
the traditional Emulex Light Pulse products.
The traditional .AWC files have been replaced with
the .ALL file. Uploading this file no longer indiscriminately
erases or resets any previously installed boot program
settings. Please see "Cautions and Warnings" for details.
The LP6DUTIL utility version 9.0a9 represents a departure from
the traditional command-line structure, and it now uses a
graphical-type user interface. It also uses a different method
of implementing scripts than did earlier LP6DUTIL versions.
Please read the LP6DUTIL document file for more information.
Known Issues:
The following issues have been reported at the time of publication.
These issues may not yet have been verified or confirmed and may
apply to another product, such as the driver or hardware.
Loading the .ALL file without the boot code no longer automatically
disables the boot program. This is "as designed", and is not a
defect. If you want to disable the boot capability, use the
firmware utility.
Cautions and Warnings:
If you use LP6DUTIL to load the firmware into the HBA, you must
use version v9.0A9 or greater. The latest version of LP6DUTIL
is included in this kit.
Downloading the .ALL file will not erase boot code settings.
For details, please see "Known Issues".
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.22
Size Driver
274KB
File Name
lpfc_2.6_driver_kit-8.2.0.22-2.tar.gz
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Base driver and install script (273 KB gz file)
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
3.2 Deletion of Vports/PCI Hot Unplug
3.2.1 Observed Problem
3.2.2 Background
3.3 lspci utility displays "Unknown Device" for LPe12000 HBAs
3.3.1 Observed Problem
3.3.2 Background
3.4 Speed of LPe12000 HBA (8Gb) is incorrectly displayed by HBAnyware
3.4.1 Observed Problem
3.4.2 Background
3.5 Port disabled on system boot or HBA reset with authentication enabled
3.5.1 Observed Problem
3.5.2 Workaround
3.6 LILO Boot Loader is not supported - i386 and x86_64 architectures
3.6.1 Observed Problem
3.6.2 Background
3.7 Order of lpfc module in initrd module list
3.7.1 Observed Problem
3.7.2 Workaround
3.8 Devloss timeout after swapping ports
3.8.1 Observed Problem
3.8.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 5
SuSE Linux Enterprise Server 10 (SP1 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC driver build to succeed. For example, a
system with the 2.6.16.46-0.7-bigsmp kernel would need the
kernel-source-2.6.16.46-0.7 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.29
Size Driver
285KB
File Name
lpfc_2.6_driver_kit-8.2.0.29-1.tar.gz
Observations
Red Hat Enterprise Linux 5.0 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Base driver and install script (288 KB gz file)
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
3.2 Deletion of Vports/PCI Hot Unplug
3.2.1 Observed Problem
3.2.2 Background
3.3 lspci utility displays "Unknown Device" for LPe12000 HBAs
3.3.1 Observed Problem
3.3.2 Background
3.4 Speed of LPe12000 HBA (8Gb) is incorrectly displayed by HBAnyware
3.4.1 Observed Problem
3.4.2 Background
3.5 Port disabled on system boot or HBA reset with authentication enabled
3.5.1 Observed Problem
3.5.2 Workaround
3.6 LILO Boot Loader is not supported - i386 and x86_64 architectures
3.6.1 Observed Problem
3.6.2 Background
3.7 Order of lpfc module in initrd module list
3.7.1 Observed Problem
3.7.2 Workaround
3.8 Devloss timeout after swapping ports
3.8.1 Observed Problem
3.8.2 Workaround
3.9 Suspend to disk and Resume support
3.9.1 Observed Problem
3.9.2 Background
3.10 Deleting vports while devices are in use
3.10.1 Observed Problem
3.10.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 5
SuSE Linux Enterprise Server 10 (SP1 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.40
Size Driver
227KB
File Name
lpfc_2.6_driver_kit-8.0.16.40-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Red Hat Enterprise Linux 4 Update 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Oracle Enterprise Linux 4 Update 4 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)Asianux 2.0 SP2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Informational
3.1 Packaging Change Involving The Application Helper Module
3.1.1 Background
3.1.2 Observed Behavior
4. Known Issues
4.1 Uninstalling the Driver Kit on Boot-from-SAN Configurations
4.1.1 Observed problem
4.1.2 Resolution
4.2 Machine Check Exception
4.2.1 Observed problem
4.2.2 Workaround
4.3 Loading order of LPFC driver in initial ramdisk
4.3.1 Background
4.3.2 Observed Problem
4.3.3 Workaround
4.4 System panic while unloading the lpfc module
4.4.1 Background
4.4.2 Observed Problem
4.4.3 Resolution
4.5 PCI Hot Plug Support for applications
4.5.1 Observed problem
4.5.2 Workaround
4.6 Storage Array discovery issues in direct-attach configurations
4.6.1 Observed problem
4.6.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 4 (Update 3 or higher)
SuSE Linux Enterprise Server 9 (SP2 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the
2.6.9-22.ELsmp kernel would need the kernel-smp-devel-2.6.9-22.EL
package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.1.10.12
Size Driver
190KB
File Name
lpfc_2.6_driver_kit-8.1.10.12-1.tar.gz
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 5
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.
2. Description of Install Procedure
The lpfc-install script installs the LPFC driver RPM. This RPM
installs the driver sources to the /usr/src/lpfc directory, builds
the driver for the currently running kernel, and then installs the
driver to the proper directory for the currently running kernel.
Once the RPM is installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
PCI Hot Plug has been found to cause applications (HBAnyware utilities or
third party applications) that use the Emulex libraries (i.e. HBAAPI), to
misbehave or malfunction.
3.1.2 Workaround
A user should stop all applications that are accessing LPFC's HBAAPI
interface (HBAnyware utilities or third party applications) before
performing PCI Hot Plug of an LPFC HBA.
Use the following command to stop the HBAnyware application:
#/usr/sbin/hbanyware/stop_hbanyware
After performing PCI Hot Plug of the HBA you can restart the applications.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
214KB
File Name
lpfc_2.6_driver_kit-8.0.16.27-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Informational
3.1 Packaging Change Involving The Application Helper Module
3.1.1 Background
3.1.2 Observed Behavior
4. Known Issues
4.1 Uninstalling the Driver Kit on Boot-from-SAN Configurations
4.1.1 Observed problem
4.1.2 Resolution
4.2 Machine Check Exception
4.2.1 Observed problem
4.2.2 Workaround
4.3 Loading order of LPFC driver in initial ramdisk
4.3.1 Background
4.3.2 Observed Problem
4.3.3 Workaround
4.4 System panic while unloading the lpfc module
4.4.1 Background
4.4.2 Observed Problem
4.4.3 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 4 (Update 3 or higher)
SuSE Linux Enterprise Server 9 (SP2 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the
2.6.9-22.ELsmp kernel would need the kernel-smp-devel-2.6.9-22.EL
package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.32
Size Driver
222KB
File Name
lpfc_2.6_driver_kit-8.0.16.32-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver and install script
1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Informational
3.1 Packaging Change Involving The Application Helper Module
3.1.1 Background
3.1.2 Observed Behavior
4. Known Issues
4.1 Uninstalling the Driver Kit on Boot-from-SAN Configurations
4.1.1 Observed problem
4.1.2 Resolution
4.2 Machine Check Exception
4.2.1 Observed problem
4.2.2 Workaround
4.3 Loading order of LPFC driver in initial ramdisk
4.3.1 Background
4.3.2 Observed Problem
4.3.3 Workaround
4.4 System panic while unloading the lpfc module
4.4.1 Background
4.4.2 Observed Problem
4.4.3 Resolution
4.5 PCI Hot Plug Support for applications
4.5.1 Observed problem
4.5.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC driver:
Red Hat Enterprise Linux 4 (Update 3 or higher)
SuSE Linux Enterprise Server 9 (SP2 or higher)
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the
2.6.9-22.ELsmp kernel would need the kernel-smp-devel-2.6.9-22.EL
package.
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit SLES 9.0
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
11MB
File Name
elxsmiprovidersles9-1.0.12-1.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.
SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.
Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.
NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit 9 (ia64)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
13.9MB
File Name
elxsmiprovider-sles9-ia64-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 9 (ia64)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit 9 (x86)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
12.6MB
File Name
elxsmiprovider-sles9-i386-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 9 (x86)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit RHEL 4
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
10.9MB
File Name
elxsmiproviderrhel3_4-1.0.12-1.tar.gz
Observations
Support Resources for PRIMEQUEST Servers
SLES9 SP3 (2.6.5-7.244)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.
SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.
Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.
NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit 4 (ia64)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
14.9MB
File Name
elxsmiprovider-rhel4-ia64-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.1.0 specification and certified against the SNIA-CTP v1.1.0.85 suite
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit 4 (x86)
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
12.4MB
File Name
elxsmiprovider-rhel4-i386-1.1.6-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 and Oracle Enterprise Linux 4 (x86)
RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.1.6
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. HBAnyware WebLaunch Integration (Optional)
SECTION 7. Known Limitations
SECTION 8. Frequently Asked Questions
SECTION 1. Introduction
The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.5.1 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").
This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.1.0.85, and it is fully compliant with SMI-S v1.1.0.
SLP (Service Location Protocol) and OpenSSL are included with the Emulex
SMI-S HBA Provider kit on Windows and are installed by default if not
already present. See Section 2 for Linux specific details.
For security purposes, you might want to replace the sample certificates
(privkey.cert and elxhba.cert) with your own signed certificates.
NOTE: The included OpenSSL library was built to exclude support for the IDEA,
MDC2 and RC5 encryption algorithms.
License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.
The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
Members of the local group "Administrators" have full access to the CIM
server by default on Windows.
On Linux, the default user account is:
User Name: root
Password: pwd580
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
260KB
File Name
lpfc_2.6_driver_kit-8.0.16.17-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver, application helper module and install script
1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
3.3 Kernel Upgrade
3.4 Changing Target Timeout
3.4.1 Background
3.4.2 Observed Problem
3.4.3 Workaround
3.5 Machine Check Exception
3.5.1 Observed problem
3.5.2 Workaround
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
drivers:
Red Hat Enterprise Linux 4
SuSE Linux Enterprise Server 9
2. Description of Install Procedure
The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.
Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
The 'elxlpfc' init script is also installed and configured to start
and stop the 'lpfcdfc' driver during system startup and shutdown.
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-5.EL kernel would need the
kernel-devel-2.6.9-5.EL package, and a system with the
2.6.9-5.ELsmp kernel would need the kernel-smp-devel-2.6.9-5.EL
package.
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.1.10.12
Size Driver
207.2MB
File Name
elxlinuxapps-3.2a16-8.1.10.12-1-2.tar
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 3.2a16, lputil 2.0a14
HBAnyware 3.2a16 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.2a16
SSC version 3.2a16
DFC Library version 2.15.1007-1-1
Lputil version 2.0a14
HBAAPI version 2.1.e
Dependencies:
lpfc driver version 8.1.10.12 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.22
Size Driver
198.5MB
File Name
elxlinuxapps-3.4a14-8.2.0.22-2-2.tar
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
HBAnyware utility 3.4a14 (198 MB tar file)
HBAnyware 3.4a14 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.4a14
SSC version 3.4a14
DFC Library version 3.0.13-1
Lputil version
HBAAPI version 2.1.g
Dependencies:
lpfc driver version 8.2.0.22 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.2.0.29
Size Driver
179.1MB
File Name
elxlinuxapps-4.0a31-8.2.0.29-1-1.tar
Observations
Red Hat Enterprise Linux 5.0 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
HBAnyware utility 4.0a31 (179 MB tar file)
HBAnyware 4.0a31 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 4.0a31
SSC version 4.0a31
DFC Library version 3.0.25-1-1
HBAAPI version 2.1.g
Multipulse version 3.0.30-1
FCAUTHD version 1.17-1-1
Dependencies:
lpfc driver version 8.2.0.29 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.32
Size Driver
197.7MB
File Name
elxlinuxapps-3.2a7-8.0.16.32-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware 3.2a7 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.2a7
SSC version 3.2a7
DFC Library version 80.163-11
Lputil version 2.0a14
HBAAPI version 2.1.d
DFC helper module
Dependencies:
lpfc driver version 8.0.16.32 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
HBAnyware requires the kernel development environment as described here:
This kit installs the Emulex Application Helper Module for the
currently running kernel. Since this installation procedure builds
the module for the currently running kernel, the kernel development
environment must be installed. For systems running Red Hat Enterprise
Linux (RHEL) 4, the appropriate kernel-devel package is required; for
example, a system with the 2.6.9-22.EL kernel would need the
kernel-devel-2.6.9-22.EL package, and a system with the 2.6.9-22.ELsmp
kernel would need the kernel-smp-devel-2.6.9-22.EL package. For
systems running SuSE Linux Enterprise Server (SLES) 9, the appropriate
kernel-source package is required; for example, a system with the
2.6.5-7.139-bigsmp kernel would need the kernel-source-2.6.5-7.139
package.
A log of each installation and uninstallation is recorded in the
following file:
/usr/src/lpfcdfc/utils-install.log
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.34
Size Driver
187.9MB
File Name
elxlinuxapps-3.3a20-8.0.16.34-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware 3.3a20 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.3a20
SSC version 3.3a20
DFC Library version 80.164-2
Lputil version 2.0a14
HBAAPI version 2.1.d_1
Dependencies:
lpfc driver version 8.0.16.34 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.40
Size Driver
196.4MB
File Name
elxlinuxapps-3.4a14-8.0.16.40-2-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Red Hat Enterprise Linux 4 Update 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Oracle Enterprise Linux 4 Update 4 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)Asianux 2.0 SP2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
HBAnyware utility 3.4a14, Application helper module 2.0.30
HBAnyware 3.4a14 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 3.4a14
SSC version 3.4a14
DFC Library version 80.164-8
Lputil version
HBAAPI version 2.1.g
Dependencies:
lpfc driver version 8.0.16.40 or later
HBAnyware requires that the lpfc driver module be installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:
Select desired mode of operation for HBAnyware
1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.
Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:
Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no
10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Application helper module
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
202KB
File Name
lpfc_2.6_ioctl_module_kit-2.0.9-2.tar.gz
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Use this file only with the RHEL 4 Update 2 or SLES9 SP3 distributions, which contain the 8.0.16.17 driver -- do not use with the driver kit above
1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
----------------------------------------------------------------------
1. System Requirements
The following distributions of Linux are supported by the Emulex
LPFC Application Helper Module:
Red Hat Enterprise Linux 4 Update 1
SuSE Linux Enterprise Server 9 SP2
2. Description of Changes
The ioctl-install script installs the LPFC Application Helper
Module RPM. This RPM installs the module sources to the
/usr/src/lpfcdfc directory, builds the module for the currently
running kernel, and then installs the module to the proper
directory for the currently running kernel.
Once the RPM is installed, the 'elxlpfc' init script is installed
and configured to start and stop the 'lpfcdfc' driver during system
startup and shutdown.
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.9-6.37.EL kernel would need the
kernel-devel-2.6.9-6.37.EL package, and a system with the
2.6.9-6.37.ELsmp kernel would need the
kernel-smp-devel-2.6.9-6.37.EL package.
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.5-7.166-bigsmp kernel would need
the kernel-source-2.6.5-7.166 package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.17
Size Driver
165.4MB
File Name
elxlinuxapps-2.1a25-8.0.16.17-1-1.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 2.1a25, lputil 2.0a9 (169 MB tar file)
HBAnyware 2.1a25 Linux Installation Instructions
This installation kit contains the following components:
HBAnyware version 2.1a25
SSC version 2.1a25
DFC Library version 80.161-5
Lputil version 2.0a9
HBAAPI version 2.1.a
Dependencies:
lpfc driver version 8.0.16.17 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.
HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware
1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware
1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so
HBAnyware Help:
To view the HBAnyware help pages or to access the Emulex Technical support pages you must have one of the
following web browsers installed:
mozilla, konqueror
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
/usr/sbin/hbanyware/start_rmserver - This script will re-start the rmserver daemon.
Run this if you manually load the lpfc driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Applications Kit
Operating System
Linux 2.6 Kernel
Version
8.0.16.27
Size Driver
187.2MB
File Name
elxlinuxapps-3.0a14-8.0.16.27-1-3.tar
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 3.0a14, lputil 2.0a13, Application helper module 2.0.15 (187 MB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
User Manual HBAnyware Utility
Information
Windows 2003
Operating System
Manual
Version
2.00a12
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
HBAnyware Utility Version 3.3
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
User Manual HBAnyware Utility
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
HBAnyware Utility Version 3.4
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
User Manual
Information
Windows 2003-2008
Operating System
Manual
Version
2.10a7
Size Driver
1.2MB
File Name
manual.pdf
Observations
Storport Miniport Driver
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Storport Miniport Driver Version 2.10 for Windows Server 2003 and Windows Server 2008
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
User Manual Storport Miniport Driver
Information
Windows 2003
Operating System
Manual
Version
2.00a12
Size Driver
984KB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Storport Miniport Driver Version 2.00 for Windows Server 2003 and Windows Vista
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
User Manual Storport Miniport Driver
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
995KB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Storport Miniport Driver Version 2.01 for Windows Server 2003 and Windows Server 2008
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Installation Manual
Information
Windows 2003-2008
Operating System
Manual
Version
2.10a7
Size Driver
256KB
File Name
quick_installation.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Troubleshooting Manual
Information
Hardware Manuals
Operating System
Manual
Size Driver
649KB
File Name
troubleshooting.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02g
Size Driver
25KB
File Name
lpfc_100_rbyd.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.11cx2
Size Driver
25KB
File Name
lpfc_100_rbyd.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Installation Manual
Information
Windows 2000-2003
Operating System
Manual
Version
2.01a4
Size Driver
114KB
File Name
quick_installation.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Information
Windows 2003
Operating System
Manual
Version
5.10a9 32-Bit
Size Driver
2.1MB
File Name
manual_ws3.pdf
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Install
Information
Windows 2003
Operating System
Manual
Version
1.20a7
Size Driver
115KB
File Name
quick_installation.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a8
Size Driver
90KB
File Name
quick_installation.pdf
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Installing the driver using AutoPilot Installer (3,085 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a9
Size Driver
498KB
File Name
quick_installation.pdf
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installing the driver using AutoPilot Installer (468 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
5.30a2
Size Driver
115KB
File Name
quick_installation.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Information
Windows 2000-2003
Operating System
Manual
Version
5.10a10 32-Bit
Size Driver
2.9MB
File Name
manual_w2k.pdf
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Information
Windows 2003
Operating System
Manual
Version
5.10a9 32-Bit
Size Driver
2.2MB
File Name
manual_w2k.pdf
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Information
Windows 2003
Operating System
Manual
Version
5.10a10 32-Bit
Size Driver
2.8MB
File Name
manual_ws3.pdf
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.30a9
Size Driver
4.6MB
File Name
manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
5.10a10 64-Bit
Size Driver
2.8MB
File Name
manual_ws3.pdf
Observations
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Installation, Configuration and Troubleshooting (2,869 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
5.10a9 64-Bit
Size Driver
2.1MB
File Name
manual_ws3.pdf
Observations
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
lputil Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
329KB
File Name
lputil.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Quick Install
Information
Windows 2000-2003
Operating System
Manual
Version
2.30a2
Size Driver
90KB
File Name
quick_installation.pdf
Observations
Port Driver - IA32
Microsoft WHQL qualified for Windows 2000 Server and 32-bit Windows Server 2003
Quick Install Installing the driver using AutoPilot Installer (90 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Boot Code Update Manual
Information
Boot Code
Operating System
Manual
Size Driver
4.9MB
File Name
bootcode.pdf
Observations
Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Manual
Information
Solaris 8-9-10 SPARC
Operating System
Manual
Version
6.30g
Size Driver
1.6MB
File Name
manual.pdf
Observations
Note This driver is posted as is, with no new version planned.
This driver version requires patch #112438 for Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
LPFC Driver for Solaris User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
1.6MB
File Name
manual.pdf
Observations
This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13
HBAnyware 3.3a19 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.20g, emlxsdriver 2.20a, or later
hbaapi 2.0.f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.3a19-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.3a19-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
1.5MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
LPFC Driver for Solaris User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
1.1MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02h
Size Driver
1MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02f
Size Driver
609KB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.10gx2
Size Driver
1MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installing and using the FCA utilities
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
863KB
File Name
sfs_utilities.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities Manual
Information
Solaris 8-9-10 SPARC
Operating System
Manual
Version
6.30g
Size Driver
876KB
File Name
sfs_utilities.pdf
Observations
SPARC Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Instructions for using the FCA utilities
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2003
Operating System
Manual
Version
1.20a7
Size Driver
3.6MB
File Name
storport120manual.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)
Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
5.30a2
Size Driver
4.3MB
File Name
manual.pdf
Observations
SCSI Port Driver - IA32
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Windows Server 2003 Upgrade Notice: If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a9
Size Driver
2.9MB
File Name
manual.pdf
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
5.20a8
Size Driver
2.9MB
File Name
manual.pdf
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Windows 2000-2003
Operating System
Manual
Version
2.30a2
Size Driver
1.4MB
File Name
manual.pdf
Observations
Port Driver - IA32
Microsoft WHQL qualified for Windows 2000 Server and 32-bit Windows Server 2003
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.11cx2
Size Driver
4.6MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.10gx2
Size Driver
3.7MB
File Name
manual.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02h
Size Driver
2.7MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02g
Size Driver
2.7MB
File Name
manual.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
NetWare 5.1-6.0
Operating System
Manual
Version
2.20e
Size Driver
429KB
File Name
manual.pdf
Observations
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Solaris 2.6-7-8-9-10
Operating System
Manual
Version
6.02f
Size Driver
2.7MB
File Name
set.pdf
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting (2,727 KB)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.2.0.22
Size Driver
1.5MB
File Name
manual.pdf
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Driver for Linux User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.1.10.12
Size Driver
3.5MB
File Name
manual.pdf
Observations
Red Hat Enterprise Linux 5.0 and later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SUSE Linux Enterprise Server 10 SP1 (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.32
Size Driver
3.6MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.27
Size Driver
3MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.17
Size Driver
2.3MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
lputil Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
329KB
File Name
lputil.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Firmware Update Manual
Information
Firmware
Operating System
Manual
Size Driver
106KB
File Name
fwupdate.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Linux User Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.2.0.29
Size Driver
1.6MB
File Name
manual.pdf
Observations
Red Hat Enterprise Linux 5.0 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
Driver for Linux User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Linux User Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.40
Size Driver
1.1MB
File Name
manual.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Red Hat Enterprise Linux 4 Update 2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) Oracle Enterprise Linux 4 Update 4 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)Asianux 2.0 SP2 or later (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
Driver for Linux User Manual
Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware User Manual
Information
Windows 2003-2008
Operating System
Manual
Version
2.10a7
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Storport Miniport Driver
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Installation Manual
Information
Hardware Manuals
Operating System
Manual
Size Driver
136KB
File Name
install.pdf
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware User Manual
Information
Solaris 8-9-10 SPARC
Operating System
Manual
Version
6.30g
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
SPARC Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware User Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.2.0.29
Size Driver
5.3MB
File Name
hbanyware.pdf
Observations
Red Hat Enterprise Linux 5.0 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) SUSE Linux Enterprise Server 10 SP1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures) Oracle Enterprise Linux 5 or later (x86 and x64 architectures)
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.21f
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
HBAnyware Utility User Manual
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware Manual
Information
Solaris 8-9-10
Operating System
Manual
Version
6.20j
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
HBAnyware Utility User Manual
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.40
Size Driver
3.5MB
File Name
hbanyware.pdf
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
HBAnyware Utility Version 3.4 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
HBAnyware Manual
Information
Linux 2.6 Kernel
Operating System
Manual
Version
8.0.16.34
Size Driver
3.1MB
File Name
hbanyware.pdf
Observations
SUSE Linux Enterprise Server 9 Service Pack 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Oracle Enterprise Linux 4 Update 4 or later (x86 and x64 architectures)
Asianux 2.0 SP2 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
NetWare 5.1-6.0
Version
2.20e
Size Driver
59KB
File Name
nw220e.zip
Observations
Emulex LightPulse PCI Fibre Channel Adapter
for Novell Netware 5.1, 6.0, and 6.5
Emulex Corporation
Release 2.20e September 30, 2005
This Readme file contains the description of the 2.20e version
of the LPFC.HAM driver for the Emulex LightPulse adapter family
and Novell NetWare 5.1, 6.0 and 6.5. It provides support for
switched Fabric operation and multi-initiator environments and
for up to 16 adapter channels using single or dual channel HBAs.
The Emulex LPFC.HAM driver has been tested in the following
environments:
1. OS Versions:
- Netware 6.5 with Support Pack 3 (NW65SP3)
- NetWare 6.0 with Support Pack 5 (NW6SP5 )
- NetWare 5.1 with Support Pack 7 (NW51SP7)
- untested with Netware 5.0 with Support Pack 6a (SP6a).
Netware 5.0 is supported by Novell, however no future work is planned for this version.
- NetWare 4.2 is not supported at this time; use Emulex driver version 1.23c to support NetWare 4.2.
2. Arbitrated Loop Environment
3. Switched Fabric Environment
4. Emulex Fibre Channel adapters
- LP11000 series adapters (minimum firmware revision 1.91a1)
- LP1150 series adapters (minimum firmware revision 1.91a1)
- LPe11000 series adapters (minimum firmware revision 1.91a1)
- LPe1150 series adapters (minimum firmware revision 1.91a1)
- LP10000 series adapters (minimum firmware revision 1.91a1)
- LP1050 series adapters (minimum firmware revision 1.91a1)
- LP101 series adapters (minimum firmware revision 1.82a0)
- LP9802DC, LP9802 and LP982 (minimum firmware version 1.91a1)
- LP9402DC, LP9002L, LP9002DC, LP9000 or LP952L (recommended firmware version 3.92a2)
- LP8000, LP8000DC and LP850
-- If your HBA has a Dragonfly chip version 2.00 or greater
use firmware version 3.92a2.
-- If your HBA has a Dragonfly chip below version 2.00,
use firmware version 3.30a7.
- LP7000E (minimum firmware version 3.21a0)
5. Suitable target hardware; lpfc.ham complies with SAN protocols
for switched fabrics and arbitrated loops.
This release includes the following files:
1. LPFC.HAM - Emulex Fibre Channel adapter HAM driver
2. lpfc.ddi - driver description file
3. readme.txt - readme file (this file)
INSTALLATION INSTRUCTIONS ON AN EXISTING NETWARE SERVER:
1. The server must support PCI 2.2 standard slots or PCI-X 1.1
standard slots.
2. At the server console load the install program. On
Netware 6.5 enter
LOAD HDETECT
On Netware 6.0, 5.1, or 5.0, enter
LOAD NWCONFIG
3. Select "Driver Options".
4. Select "Configure disk and storage device drivers".
5. Select "Select an additional driver".
6. Press
(If there is a previously installed version of the driver,
this will update and replace it).
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02f
Size Driver
12MB
File Name
solaris-2.1a18-6.02f-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
This kit contains the following components:
lpfc-6.02f-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps300a39-Solaris.tar - Emulex Applications kit
readme.first.txt - this file
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/solframe.htm.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a39-Solaris.tar package.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02g
Size Driver
12MB
File Name
solaris-2.1a18-6.02g-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
HBAnyware 2.1a18 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.02c, or later
hbaapi 2.0e
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 2.6-7-8-9-10
Version
6.02h
Size Driver
12MB
File Name
solaris-2.1a18-6.02h-1a.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9
HBAnyware 2.1a18 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.02c, or later
hbaapi 2.0e
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities
Operating System
Solaris 2.6-7-8-9-10
Version
6.02g
Size Driver
76KB
File Name
emlxu_kit-1.00m-sparc.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00q and emlxdrv version 1.00j for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (77 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities
Operating System
Solaris 2.6-7-8-9-10
Version
6.02h
Size Driver
76KB
File Name
emlxu_kit-1.00n-sparc.tar
Observations
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities
Operating System
Solaris 8-9-10
Version
6.10gx2
Size Driver
76KB
File Name
emlxu_kit-1.00n-sparc.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
FCA Utilities
Operating System
Solaris 8-9-10
Version
6.21f
Size Driver
212KB
File Name
emlxu_kit-1.01a-sparc.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.20j
Size Driver
21.5MB
File Name
solaris-3.3a19-6.20j-1b.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13 (21.5 MB tar file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.10gx2
Size Driver
20MB
File Name
solaris-3.0a17-6.10gx2-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.0a17 and lputil 2.0a13
HBAnyware 3.0a17 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.10b, or later
hbaapi 2.0f
Java Runtime Environment
Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.0a17-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.0a17-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.11cx2
Size Driver
24.1MB
File Name
solaris-3.1a12-6.11cx2-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.1a12 and lputil 2.0a13
HBAnyware 3.1a12 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.11c, emlxsdriver 2.20a, or later
hbaapi 2.0f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.1a12-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.1a12-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts
/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 8-9-10
Version
6.21f
Size Driver
21.5MB
File Name
solaris-3.4a15-6.21f-1a.tar
Observations
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.4a15, emlxdrv utility 1.00l; emlxdrv is needed for a fresh installation of Solaris 10 Update 1
HBAnyware 3.4a15 Solaris Installation Instructions
Dependencies:
lpfcdriver 6.21a, emlxsdriver 2.20a, or later
hbaapi 2.0.f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.
The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html
JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.4a15-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.4a15-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
1. su to root
2. Run the script /opt/emulex/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Solaris 8-9-10 SPARC
Version
6.30g
Size Driver
25.5MB
File Name
solaris-4.0a37-6.30g-1b.tar
Observations
SPARC Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Base driver, HBAnyware utility 4.0a37, emlxdrv utility 1.00m; emlxdrv is needed for a fresh installation of Solaris 10 Update 1
HBAnyware 4.0a37 Solaris Installation Instructions
Dependencies:
lpfc driver 6.30g or later
hbaapi 2.0.f
Java Runtime Environment
Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.
The JRE and instructions for installation can be found at http://java.com.
JAVA NOTE:
HBAnyware needs the Java runtime binaries and libraries, so their path needs to be included
in the PATH environment variable. For example, if your java runtime binaries are in /usr/java/bin,
then include this path in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")
HBAnyware and hbacmd currently will not run under Solaris 6. The HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.
HBAnyware is dependent on the Emulex lpfc driver being installed. Please ensure that this package is
installed prior to installing HBAnyware.
HBAnyware Installation Instructions
-----------------------------------
1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-4.0a37-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-4.0a37-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI
-------------------------
1. su to root
2. Execute the command: /opt/HBAnyware/hbanyware
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2000-2003
Version
2.01a4
Size Driver
8.8MB
File Name
storportminiportkit_2-01a4-1h.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2008.
Note For Windows Server 2003, SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Base driver, HBAnyware utility 3.4a9 (8.83 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2000-2003
Version
2.30a2
Size Driver
14.2MB
File Name
fcportkit_2-30a2c-3f.exe
Observations
Port Driver - IA32
Microsoft WHQL qualified for Windows 2000 Server and 32-bit Windows Server 2003
Base driver and Emulex Configuration Utility (elxcfg) version 1.41a16 (12,927 KB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2000-2003
Version
5.20a8
Size Driver
14MB
File Name
scsiportminiportkit_5-20a8c-2g.exe
Observations
Qualification: The driver for Windows Server 2003 is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium platforms. The driver for Windows 2000 Server is qualified and digitally signed by WHQL labs for Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
OS Versions: Windows Server 2003 SP1 and Windows Server 2000 SP2
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note If you are upgrading from Windows 2000 Server to Windows Server 2003 and are currently running an Emulex SCSIport Miniport driver, you must uninstall the driver before upgrading the operating system. Reinstall the Emulex SCSIport Miniport driver after you upgrade the operating system.
Base driver, HBAnyware utility 2.1a16 and lputilnt 1.8a13
(14.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2000-2003
Version
5.20a9
Size Driver
14.3MB
File Name
scsiportminiportkit_5-20a9-1d.exe
Observations
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Base driver, HBAnyware utility 2.1a17 and lputilnt 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2000-2003
Version
5.30a2
Size Driver
18.4MB
File Name
scsiportminiportkit_5-30a2-1d.exe
Observations
SCSI Port Driver - IA32
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Windows Server 2003 Upgrade Notice: If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Base driver, HBAnyware utility 3.0a9 and lputilnt 1.8a18 (18 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit
Operating System
Windows 2000-2003
Version
5.30a2
Size Driver
6.9MB
File Name
elxsmiprovider1.0.12-1.exe
Observations
SCSI Port Driver - IA32
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Windows Server 2003 Upgrade Notice: If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment (6.97 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
SMI-S Provider Kit
Operating System
Windows 2003
Version
1.20a7
Size Driver
7.1MB
File Name
elxsmiprovider1.1.6-2.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
SMI-S HBA Provider, compliant with the SMI-S 1.1.0 specification and certified against the SNIA-CTP v1.1.0.85 suite
Pre-packaged with OpenPegasus CIMOM v2.5.1, as a turnkey SMI-S agent for ease of installation and deployment
(7.18 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit 32-bit
Operating System
Windows 2003
Version
5.10a10 32-Bit
Size Driver
5.2MB
File Name
scsiport-5-5.10a10-sp1.zip
Observations
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
This kit contains the following components:
ns5510a10sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit 32-bit
Operating System
Windows 2003
Version
5.10a9 32-Bit
Size Driver
5.2MB
File Name
scsiport-5-5.10a9-sp1.zip
Observations
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
For Windows 2000 Server, Service Pack 4 is required for cluster configurations.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
This kit contains the following components:
ns5510a9sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated to install
the hbaapi.dll file in the Emulex utilities directory to be compatible with
Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns5510a9sc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
applications kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit 64-bit
Operating System
Windows 2003
Version
5.10a10 64-Bit
Size Driver
6.1MB
File Name
scsiport-6-5.10a10-sp1.zip
Observations
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
This kit contains the following components:
ns6510a10dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit 64-bit
Operating System
Windows 2003
Version
5.10a9 64-Bit
Size Driver
6.1MB
File Name
scsiport-6-5.10a9-sp1.zip
Observations
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
This kit contains the following components:
ns6510a9dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file
The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.
The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.
It is important that the components of this kit be installed in the
appropriate order:
1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns6510a9dc.zip package.
2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2003
Version
2.00a12
Size Driver
21.4MB
File Name
storportminiportkit_2-00a12-1d.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB932755 update to the Microsoft Storport driver are required. The KB932755 update must be applied before the Emulex Storport Miniport driver version 2.00 can be installed.
Base driver, HBAnyware utility 3.3a14 (21.4 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2003
Version
1.20a7
Size Driver
17.9MB
File Name
storportminiportkit_1-20a7-1d.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2003
Version
1.30a9
Size Driver
24.2MB
File Name
storportminiportkit_1-30a9-1e.exe
Observations
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or later, and the KB932755 update to the Microsoft Storport driver, are required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a19 (24 MB exe file)
Company
Emulex
Categories
Networks Cards
Serie
Emulex Products Emulex for Hitachi Data Systems-Branded HBAs
Model
Emulex LP9802DC
Description
Driver Kit
Operating System
Windows 2003-2008
Version
2.10a7
Size Driver
11.6MB
File Name
storportminiportkit_2-10a7-1e.exe
Observations
Storport Miniport Driver
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and the KB932755 update to the Microsoft Storport driver are required. KB945119 is recommended. The Storport KB update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 (11.6 MB exe file)
Access to Official Website Emulex
Welcome to the HelpDrivers, driver for printers.
Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more
You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.
Do not rename the file you're downloading, it may cause installation problems.