Emulex LP9002S Download Drivers, Utilities and Manual

Available 36 files for LP9002S
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02h
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 2.6-7-8-9-10
Version Driver
6.02h
Size Driver
12Mb
File Name
solaris-2.1a18-6.02h-1a.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

HBAnyware 2.1a18 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.02c, or later
hbaapi 2.0e

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02h
Size Manual
2.7Mb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 2.6-7-8-9-10
Version Utilities
6.02h
Size Utilities
76Kb
File Name
emlxu_kit-1.00n-sparc.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02h
Size Manual
1Mb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02g
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 2.6-7-8-9-10
Version Driver
6.02g
Size Driver
12Mb
File Name
solaris-2.1a18-6.02g-1a.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

HBAnyware 2.1a18 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.02c, or later
hbaapi 2.0e

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02g
Size Manual
2.7Mb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 2.6-7-8-9-10
Version Utilities
6.02g
Size Utilities
76Kb
File Name
emlxu_kit-1.00m-sparc.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00q and emlxdrv version 1.00j for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (77 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02g
Size Manual
609Kb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02f
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 2.6-7-8-9-10
Version Driver
6.02f
Size Driver
12Mb
File Name
solaris-2.1a18-6.02f-1a.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

This kit contains the following components:

lpfc-6.02f-sparc.tar - Emulex Fibre Channel Solaris Driver
EmlxApps300a39-Solaris.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/solframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a39-Solaris.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02f
Size Manual
2.7Mb
File Name
set.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting (2,727 KB)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 2.6-7-8-9-10
Version Utilities
6.02f
Size Utilities
76Kb
File Name
emlxu_kit-1.00m-sparc.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
emlxadm version 1.00q and emlxdrv version 1.00j for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (77 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02f
Size Manual
609Kb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installing and using the FCA utilities

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.21f
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information. Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 8-9-10
Version Driver
6.21f
Size Driver
21.5Mb
File Name
solaris-3.4a15-6.21f-1a.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.4a15, emlxdrv utility 1.00l; emlxdrv is needed for a fresh installation of Solaris 10 Update 1

HBAnyware 3.4a15 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.21a, emlxsdriver 2.20a, or later
hbaapi 2.0.f

Java Runtime Environment

Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.4a15-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.4a15-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI

1. su to root
2. Run the script /opt/emulex/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.21f
Size Manual
1.5Mb
File Name
manual.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
LPFC Driver for Solaris User Manual

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
HBAnyware Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.21f
Size Manual
3.5Mb
File Name
hbanyware.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
HBAnyware Utility User Manual

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 8-9-10
Version Utilities
6.21f
Size Utilities
212Kb
File Name
emlxu_kit-1.01a-sparc.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note - Emulex supports current Solaris x86 systems through an SFS driver
Note - For legacy lpfc drivers that are not listed under Previous Releases
emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.21f
Size Manual
863Kb
File Name
sfs_utilities.pdf
Information
Instructions for using the FCA utilities

Introduction.............................................................................................................. 1
Fibre Channel Overview .................................................................................... 1
The Solaris Fibre Channel Stack ....................................................................... 1
Installing the Utilities................................................................................................ 3
Compatibility...................................................................................................... 3
Installing or Updating the Utilities Using the emlxu_install Script....................... 4
Removing the Utilities Using the emlxu_remove Script ..................................... 5
Installing the Utilities Package Manually............................................................ 6
Removing the Utilities Package Manually.......................................................... 7
Updating the Utilities Package Manually ........................................................... 7
Using the emlxadm Utility ........................................................................................ 8
Modes of Operation (emlxadm) ......................................................................... 8
Interactive Mode (emlxadm)........................................................................ 8
CLI Mode (emlxadm)................................................................................... 9
Command Descriptions (emlxadm) ................................................................. 11
Using the emlxdrv Utility ........................................................................................ 31
Modes of Operation (emlxdrv) ......................................................................... 31
Interactive Mode (emlxdrv)........................................................................ 31
CLI Mode (emlxdrv)................................................................................... 33
Command Descriptions (emlxdrv) ................................................................... 33

This document provides the information needed to use the Emulex® emlxadm and elmxdrv utility
programs. For system administrators, this document includes information about the installation and
removal of these utilities.
At the very least, system administrators should be familiar with Solaris and the Sun StorEdge SAN
Foundation Software (SFS) and should have access to standard system documentation. Anyone
working with this product should have some familiarity with the nature and use of Fibre Channel.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.20j
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 8-9-10
Version Driver
6.20j
Size Driver
21.5Mb
File Name
solaris-3.3a19-6.20j-1b.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13 (21.5 MB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.20j
Size Manual
1.6Mb
File Name
manual.pdf
Information
This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Base driver, HBAnyware utility 3.3a22 and lputil 2.0a13

HBAnyware 3.3a19 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.20g, emlxsdriver 2.20a, or later
hbaapi 2.0.f

Java Runtime Environment

Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, 5.10, and 5.11.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.3a19-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.3a19-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkgadd, choose to install HBAnyware
7. When prompted by pkgadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
HBAnyware Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.20j
Size Manual
3.1Mb
File Name
hbanyware.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
HBAnyware Utility User Manual

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
lputil Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.20j
Size Manual
329Kb
File Name
lputil.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
lputil Utility User Manual

Introduction.............................................................................................................. 1
Installing lputil .......................................................................................................... 1
Starting lputil............................................................................................................ 2
Discovering HBAs.................................................................................................... 4
Viewing HBA Information......................................................................................... 4
Resetting an HBA .................................................................................................... 5
Updating an HBA’s Firmware or Boot Code ............................................................. 5
Enabling or Disabling Boot Code ............................................................................. 6
Downloading PCI Configuration............................................................................... 7
Setting Up Persistent Binding (Solaris Only)............................................................ 7
Using the Command Line Interface ......................................................................... 9
Examples of lputil Commands................................................................... 11

Introduction
The LightPulse® diagnostic utility (lputil) for Linux and Solaris is a console application that enables you
to manage local Emulex® host bus adapters (HBAs).
Use lputil to do any of the following:
• Discover HBAs
• View HBA information
• Reset HBAs
• Update firmware or boot code on the local HBA
• Enable or disable the boot code on the HBA
• Download PCI Configuration
• Set Up Persistent Binding (Solaris only)
• Use the Command Line Interface (CLI)
Prerequisites
Before using lputil, ensure the following prerequisites are met:
• The Emulex driver is installed.
• The lputil utility is installed.
• If you are updating firmware, the firmware file is downloaded to a local drive. Firmware versions
differ between HBA versions. Make sure you have downloaded the appropriate firmware for your
HBA.
• I/O activity on the bus is quieted.
• Any software that relies on the HBA to be available is stopped or paused.
Installing lputil
To install lputil:
1. Download the lputil.tar file from the Emulex Web site to a directory on a local drive on the server.
2. Untar the contents of the lputil.tar file.
3. Run the lputil installation script.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 8-9-10
Version Utilities
6.20j
Size Utilities
212Kb
File Name
emlxu_kit-1.01a-sparc.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note This driver version requires patch #112438 for
Solaris 8 operation.
Starting with this Solaris driver version 6.20, the driver no longer uses the sd.conf and st.conf files to limit the storage presented to the OS. If your environment uses these files to perform LUN or target masking, refer to the driver manual for important configuration information.
Note Emulex supports current Solaris x86 systems through an SFS driver
Note For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.11cx2
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 8-9-10
Version Driver
6.11cx2
Size Driver
24.1Mb
File Name
solaris-3.1a12-6.11cx2-1a.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.1a12 and lputil 2.0a13

HBAnyware 3.1a12 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.11c, emlxsdriver 2.20a, or later
hbaapi 2.0f

Java Runtime Environment

Version 1.5 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on a driver being installed, so install lpfcdriver or emlxsdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.1a12-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.1a12-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.11cx2
Size Manual
4.6Mb
File Name
manual.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 8-9-10
Version Utilities
6.11cx2
Size Utilities
212Kb
File Name
emlxu_kit-1.01a-sparc.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note: Emulex recommends installing driver version 6.11cx2, which adds a critical fix to the previously posted 6.11c driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
emlxadm version 1.01a and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Solaris 10 Update 1 behavior change must read before downloading driver Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.10gx2
Size Manual
25Kb
File Name
lpfc_100_rbyd.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases Solaris 10 Updates and the lpfc
Driver
The behavior of the Solaris operating system changes beginning with Solaris 10 Update 1 (also referred
to as Solaris 10 1/06 release). Starting with this version, a bare-metal installation of the operating system
automatically discovers all SFS-recognized HBAs (Sun-branded, Emulex, or EMC-branded) and binds
them to the “emlxs” SFS driver. A subsequent installation of lpfc will not discover and bind these HBAs;
you must use the emlxdrv utility to unbind the HBAs from the SFS driver as described in this document.

Note: You do not need to follow the procedure described in this document in the following
circumstances:
• If the server contains any Sun-branded HBAs, which are recognized
and supported only by the emlxs driver and not by the lpfc driver; you
must use the emlxs driver on all HBAs.
• If you installed an earlier version of Solaris and bound the HBAs to the
lpfc driver; updating to Solaris 10 Update 1 (or later) by applying
patches will not unbind the HBAs from the lpfc driver.

Prerequisites:
• SPARC platform
• Solaris 10 Update 1 or later installed on a local drive
• Sun released patch 120222-06 or later installed
• Emulex® FCA utility version 1.00m (which includes emlxdrv 1.00j for SPARC) or later installed
(see the Emulex FCA Utilities Reference Manual for installation instructions)
• Emulex lpfc driver not yet installed
To unbind the HBAs from the SFS driver, do the following:
1. Start the emlxdrv utility as described in the Emulex FCA Utilities Reference Manual.
2. Type the following command at the emlxdrv prompt:
clear_all
This unbinds from emlxs all HBAs that are recognized by both emlxs and lpfc drivers.
3. Exit the emlxdrv utility by typing the following:
q
Install the lpfc driver as instructed in the documentation that accompanies the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Driver Kit
Operating Systems
Solaris 8-9-10
Version Driver
6.10gx2
Size Driver
20Mb
File Name
solaris-3.0a17-6.10gx2-1a.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Base driver, HBAnyware utility 3.0a17 and lputil 2.0a13

HBAnyware 3.0a17 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.10b, or later
hbaapi 2.0f

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6. HBAnyware and hbacmd target OS versions
include Solaris 5.8, 5.9, and 5.10.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Run the unpack script : ./unpack_apps
to obtain correct package version
3. Unzip the file: gunzip HBAnyware-3.0a17-sparc.tar.gz
4. Untar the file: tar -xvf HBAnyware-3.0a17-sparc.tar
5. Run the pkgadd utility: pkgadd -d .
6. When prompted by pkadd, choose to install HBAnyware
7. When prompted by pkadd, answer the HBAnyware installation option questions
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.10gx2
Size Manual
3.7Mb
File Name
manual.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities
Operating Systems
Solaris 8-9-10
Version Utilities
6.10gx2
Size Utilities
76Kb
File Name
emlxu_kit-1.00n-sparc.tar
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
emlxadm version 1.00r and emlxdrv version 1.00k for SPARC; emlxdrv is needed for a fresh installation of Solaris 10 Update 1 (75.5 KB tar file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9002S
Description
FCA Utilities Manual
Operating Systems
Solaris 8-9-10
Version Manual
6.10gx2
Size Manual
1Mb
File Name
manual.pdf
Information
Solaris 8, 9 and 10 (32-bit and 64-bit)
Note Emulex recommends installing driver version 6.10gx2, which adds a critical fix to the previously posted 6.10g driver. Driver functionality and behavior are otherwise identical.
Note Emulex supports current Solaris x86 systems through an SFS driver
For a legacy lpfc driver for Solaris 9 x86, or for Solaris 8 SPARC legacy drivers that are not listed under Previous Releases
Installing and using the FCA utilities

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
HelpDrivers Since March 2000