Emulex LP10000 Download Drivers, Manual and Firmware

Available 33 files for LP10000
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Universal Boot
Operating Systems
Boot Code
Version Driver
5.02a1
Size Driver
199Kb
File Name
tu502a1.zip
Information
Contains: x86 BootBIOS version 1.71a0, OpenBoot version 1.50a9 and EFI Boot 3.11a5 This Universal Boot version 5.02a1 contains:

(1) x86 BootBIOS version 1.71a0
(2) OpenBoot version 1.50a9
(3) EFIBoot version 3.11a5

For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.

Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:

\502a1.txt this file you are reading
\HU502a1.PRG LP9802 Universal Boot
\TU502a1.PRG LP10000 Universal Boot
\BU502a1.PRG LP11000 Universal Boot
\ZU502a1.PRG LPe11000 Universal Boot
\elxcli311a5.efi EFI 3.11a5 Driver
Universal Boot Load Procedure

The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.

1. "Drvcfg" : EFI based Systems.

Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.

2. LP6DUTIL.EXE : DOS based utility.

Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.

3. LPUTILNT : Windows Miniport Driver.

Please refer to the utility user manual for details on using the above tool.

4. Emulex Configuration Tool : Windows Port Driver.

Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Boot Code Update Manual
Operating Systems
Boot Code
Size Manual
4.9Mb
File Name
bootcode.pdf
Information
Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Firmware
Operating Systems
Firmware
Version Firmware
1.91a5
Size Firmware
330Kb
File Name
td191a5.zip
Information
Compatibility:

This kit supports the LP10000, LP10000DC and LP10000ExDC
PCI host adapters.

This kit includes the following files:

README.TXT The file you are reading

TD191A5.ALL All firmware components, no boot code

LP6DUTIL.EXE DOS-based diagnostic utility 9.3a6
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a6
Changes and Corrections:

-- Changes and corrections between 1.91a5 and 1.91a4:

Ensure proper DMA behavior upon channel reset. (CR 19091, 19096)

Pre-initialize configuration region to avoid errors if host reads it
before the initial configuration is complete. (CR 19177, 19187, 19188)

-- Changes and corrections between 1.91a4 and 1.91a3:

Several issues with FLASH access during reset of only one port have been
eliminated by synchronizing the flash access speed of both ports.
(CR 17472, 17475, 17539, 17542, 17625, 17626, 17647, 17648, 18212,
18213, 18307)

An exceptionally rigorous test produced a timeout where the rings other
than ring 0 were ignored. The firmware has been corrected to check all
four rings. (CR 15952, 16262, 16279, 16280, 16281, 16282, 16283)

Improved handling of queued data from tape. Recovery of CRC errors
no longer indirectly trigger an abort on slow PCI environments.
(CR 17410, 17510, 17520, 17608, 17610, 17633, 17634, 17635, 18280,
18343)

Changed handling of dropped FCP-2 tape data frames. Upon detecting a
missing frame, the firmware now automatically requests a retransmission
from the drive. (CR 14851, 15184, 16975, 18329)

The firmware now correctly handles intentional IOCB starvation.
(CR 16818, 16873, 16972, 17211)

An I/O timeout during tape operation was eliminated by delaying
processing of any FCP2 errors during discovery. (CR 17363, 18287, 18288)

Improved handling of linked FCP commands in order to avoid timeouts.
(CR 15602, 16114)

Implemented a workaround to avoid a hardware DMA overrun condition.
(CR 17780, 17834, 17908)

To avoid buffer deadlocks, the HBA now completes any existing DMA for
an exchange prior to allocating more free buffers. (CR 16862, 16874,
16973, 18347)

Dump command now correctly dumps memory above 1MB. (CR 18374)

Improved buffer handling logic during error conditions to avoid aborted
exchanges. (CR 17701, 18291, 18292, 18349)

Improved handling of erroneously-sized ECHO responses. (CR 18330,
18332, 18333)

The HBA now transmits all outstanding ACKs before processing any
previously blocked data. (CR 16354, 18334, 18335)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Firmware Update Manual
Operating Systems
Firmware
Size Firmware
106Kb
File Name
fwupdate.pdf
Information
Introduction.............................................................................................................. 1
Prerequisites ..................................................................................................... 1
Things to Know Before You Download ............................................................. 1
Update Utilities ........................................................................................................ 2

Introduction
For information about any firmware release, see the release notes on the Emulex Web site. Release
notes include information such as new features, compatibility, known issues and resolved known issues.
This manual does not contain the procedures themselves. It serves as a guide to the publication that
contains the procedures you need.

Prerequisites
• Local boot disk.
• The intended Fibre Channel target should be big enough to hold all system files and the swap
slice of the current local boot disk.

Things to Know Before You Download
• Before you download the OneConnect or LightPulse files, create a directory for them.
• As a measure of protection, ensure that critical files on your local boot disk are backed up.
• Firmware may be bundled with boot code. Boot code allows you to designate a device that is
attached to the adapter as a boot drive. If you select a firmware image that includes boot code,
the update procedure will load both the new firmware and the boot code at the same time. After
updating, refer to the Emulex Boot Manual for procedures on enabling the boot code on your
adapter.
• Emulex firmware files support both OneConnect and LightPulse adapters.
• For OneConnect adapters:
• Firmware and boot code are provided in a single flash image called a .UFI file.
• The UFI file contains all of the files that support all OneConnect adapters. The latest
files for your adapter are installed automatically when you use an Emulex utility to
update the firmware.
• The UFI file contains both firmware and boot code.
• For LightPulse adapters:
• Firmware is provided in a .ZIP file as a .ALL file or a .AWC file. You must manually unzip
the .ALL or .AWC file from the .ZIP file before you can use an Emulex utility to install it.
• Firmware differs between adapter models. Make sure you download the appropriate
firmware for your adapter.
• The .ZIP file may or may not include a boot code (.PRG) file.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Installation Manual
Operating Systems
Hardware Manuals
Size Manual
364Kb
File Name
install_lp10000.pdf
Information
Table of ContentsInstallationFeaturesCompatibilityPrerequisitesSet JumpersInstall HBAAttach MediaApply PowerView LEDsReferenceSpecificationsFCC StatementDeclaration of ConformityLaser Safety

Features
The LP10000 host bus adapter offers a highly integrated 2Gb/s Fibre Channel HBA for use in servers based on either the conventional PCI or PCI-X 1.0a expansion bus architectures. The LP10000 delivers exceptional performance through the use of a sixth generation Emulex Thor controller. The Thor high-performance controller is a highly integrated device that combines industry standard embedded ARM9 processors, 1Gig/2Gig SERDES and protocol technology into a single module. The LP10000 is a single-channel HBA in a low-profile PCI (MD2) compliant card format.
Major Features
l
Full duplex 2Gb/s Fibre Channel delivering up to 400MB/s
l
Superior transaction processing performance
l
Automatic speed negotiation
l
Automatic topology detection
l
Full fabric support using F_Port and FL_port connections
l
Onboard hardware context cache for superior fabric performance
l
Support for use of multiple concurrent protocols (SCSI and IP)
l
Full support for both FC service class 2 and 3
l
Full fabric support in x86, Itanium and SPARC environments
l
Support for FC-Tape (FCP-2) devices
l
66/100/133 MHz PCI-X 1.0a and PCI 2.3 compatibility
l
End-to-end parity protection for high data integrity
l
Robust suite of software supporting Windows Server 2003, Windows 2000, Windows NT, Linux, NetWare and Solaris
l
3.3V signaling, 5V tolerant
l
Optical small form factor (LC) interface
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Advanced Troubleshooting Manual
Operating Systems
Hardware Manuals
Size Manual
649Kb
File Name
troubleshooting.pdf
Information
Overview................................................................................................................ 1
Be Informed, Stay Informed, Stay Current 1
The Importance of Compatibility, Driver Updates and Firmware Updates 1
Driver Updates........................................................................................... 1
Firmware Updates...................................................................................... 2
Emulex Configuration Parameters 3
How Emulex Device Driver Configuration Parameters Work...................... 3
Emulex Applications 3
Troubleshooting...................................................................................................... 4
Observing the Problem 4
Isolating the Problem 4
SAN Components...................................................................................... 4
Server Components................................................................................... 5
Checklists 6
Connectivity Checklist................................................................................ 6
Installation Checklist.................................................................................. 7
Upgrade Checklist...................................................................................... 8
Configuration Checklist.............................................................................. 8
Tools to Collect Data 9
Driver Tools - Event Logging...................................................................... 9
The OneCommand Manager and HBAnyware Applications....................... 9
Other Ways to Collect Data...................................................................... 10
Common Problems 10
Hardware Issues...................................................................................... 10
Link Down................................................................................................ 10
Cannot See Devices or Drives................................................................. 11
Out-of-Date Driver Version....................................................................... 12
Out-of-Date Firmware Version.................................................................. 12
OneConnect and LightPulse LP21000 Adapters 13
OneConnect and LP21000 Checklist....................................................... 13
OneConnect and LP21000 Symptoms..................................................... 13
When to Contact Emulex...................................................................................... 14
Emulex Web Site and Emulex Support................................................................. 15
Emulex Support Page 15
Contact Emulex After Hours, Weekends or Holidays............................... 17
LED Reference Information.................................................................................. 18
Firmware Operation and Port Activity LEDs 18
Common LED States 18
Normal Link Up........................................................................................ 18
Link-Down or adapter waiting................................................................... 19
Heart-beat indication................................................................................ 19
OneConnect CNA LEDs........................................................................... 19
LP21000 LEDs......................................................................................... 19
LED Table................................................................................................ 21

Driver Updates
To update your driver, download the latest Emulex driver and utilities from the Emulex Web site. From
the main Emulex Web site, click Downloads, click your vendor and then click the link for your operating
system (OS).
Drivers for Windows
• The drivers for Windows include support for Windows Server 2008 R2, Windows Server 2008,
Windows Server 2003, Windows 2000 Server and Windows NT (No future versions of drivers for
Windows 2000 Server or Windows NT are planned.)
•The driver kit download includes the base driver and the OneCommand Manager application.
•If you are running Windows Server 2008 R2, Windows Server 2008, Windows Server 2003 or Windows 2000 Server, the driver kit download includes AutoPilot Installerฎ, which enables you to quickly install or update drivers and utilities and configure adapters, drivers and utilities.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Basic Troubleshooting Manual
Operating Systems
Hardware Manuals
Size Manual
157Kb
File Name
troubleshooting_basic.pdf
Information
Emulex Product Installation, Upgrades, and Configuration
Installing, upgrading and configuring Emulex products can be easily accomplished by following the checklists provided at the end of this document.
A word about Emulex configuration parameters:
Emulex drivers and software provide a great degree of configurability. In particular, each driver has a number of configuration parameters that allow the customization of the behavior of the driver. Because these parameters can significantly change the behavior of the Emulex product, great care must be taken in the setting of the parameters. Storage and system providers put forth great effort in determining what particular configuration parameters must be set to in order to provide optimal SAN performance.
For best results, never change the driver configuration parameters from their default values or the values that are specified by the storage and systems providers. Doing so can alter to performance of the SAN and possibly place the SAN in a configuration that is not supported or cause it not to operate properly.
How Emulex device driver configuration parameters work
It is very important to understand that Emulex configuration parameters are stored in the server in which the HBA is installed into. The parameters are acted upon by the device driver. Emulex configuration parameters are NOT stored in the HBA flash memory. Unlike some other SCSI and Fibre Channel HBAs, Emulex does not store any configuration information such as timers, Fibre Channel topology or link speed in the HBA flash. When an Emulex HBA is installed into a server, there is no separate configuration step required for the HBA. Proper driver configuration is all that is required. The exception is booting from SAN. In this case, the HBA BIOS utility must be used to configure the boot device. Said differently, the HBA must be told which Fibre Channel device contains the boot volume, and that information is stored in the flash. These settings are only in effect at boot time. Once the operating system loads the device driver, most settings of the driver are used and the HBA BIOS no longer functions.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
HP-UX
Version Driver
4.31.09 (PA-RISC)
Size Driver
4.6Mb
File Name
lpfc.depot-04_31_09-hpux11iv2.pa_64_dlkm.z
Information
HP-UX 11iv2 (11.23)
Base driver and lputil 2.0a14 (4.66 MB Z UNIX file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
HP-UX
Version Manual
4.31.09 (PA-RISC)
Size Manual
1.8Mb
File Name
manual.pdf
Information
HP-UX 11iv2 (11.23)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
HP-UX
Version Driver
5.31.09
Size Driver
3.8Mb
File Name
lpfc.depot-05_31_09-hpux11iv2_64_dlkm.z
Information
64-bit Itanium Processor Family: Provides SCSI functionality over Fibre Channel arbitrated loops and fabric topologies.
OS Version: HP-UX 11iv2 (11.23)
Base driver and lputil 2.0a14 (3.89 MB Z UNIX file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
HP-UX
Version Manual
5.31.09
Size Manual
1.3Mb
File Name
manual.pdf
Information
64-bit Itanium Processor Family: Provides SCSI functionality over Fibre Channel arbitrated loops and fabric topologies.
OS Version: HP-UX 11iv2 (11.23)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Solaris 2.6-7-8-9-10
Version Driver
6.02h
Size Driver
12Mb
File Name
solaris-2.1a18-6.02h-1a.tar
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Base driver, HBAnyware utility 2.1a18, HBAnyware Security Configurator 2.1a18 and lputil 2.0a9

HBAnyware 2.1a18 Solaris Installation Instructions

Dependencies:

lpfcdriver 6.02c, or later
hbaapi 2.0e

Java Runtime Environment

Version 1.4 or later of the Java Runtime Environment (JRE) must
be installed. HBAnyware will not run under earlier versions of
the JRE.

HBAnyware and hbacmd currently will not run under Solaris 6.

The JRE and instructions for installation can be found at http://java.sun.com/downloads/index.html

JAVA NOTE:
HBAnyware needs the java runtime binaries and libraries, so their path needs to be included in the PATH
environment variable. For example, if your java runtime binaries are in /usr/java/bin, then include this path
in your PATH environment variable. (bash> export PATH="$PATH:/usr/java/bin")


HBAnyware is dependant on lpfcdriver being installed, so install lpfcdriver first if it is not already installed.

1. Run the pkgrm routine to remove any previous version of HBAnyware: pkgrm HBAnyware
2. Copy the HBAnyware-2.1a18-sparc.tar.gz file to a directory on the install machine
3. cd to the directory which you copied the tar file
4. Unzip the file: gunzip HBAnyware-2.1a18-sparc.tar.gz
5. Untar the file: tar -xvf HBAnyware-2.1a18-sparc.tar
6. Run the pkgadd routine: pkgadd -d .
7. When prompted by pkadd, choose to install HBAnyware
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Solaris 2.6-7-8-9-10
Version Manual
6.02h
Size Manual
2.7Mb
File Name
manual.pdf
Information
Solaris 2.6, 7, 8, 9 and 10 (32-bit and 64-bit)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
5.30a2
Size Driver
18.4Mb
File Name
scsiportminiportkit_5-30a2-1d.exe
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Base driver, HBAnyware utility 3.0a9 and lputilnt 1.8a18 (18 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
5.30a2
Size Manual
4.3Mb
File Name
manual.pdf
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Windows 2000-2003
Version Driver
5.20a10 64-Bit
Size Driver
13.8Mb
File Name
scsiportminiportkit_5-20a10-1a.exe
Information
Qualification:The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Base driver, HBAnyware utility 2.1a17 and lputilnt 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
5.20a10 64-Bit
Size Manual
2.9Mb
File Name
manual.pdf
Information
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit 64-bit
Operating Systems
Windows 2000-2003
Version Driver
5.10a10 64-Bit
Size Driver
6.1Mb
File Name
scsiport-6-5.10a10-sp1.zip
Information
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.

This kit contains the following components:

ns6510a10dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 64-Bit
Size Manual
2.8Mb
File Name
manual_ws3.pdf
Information
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Installation, Configuration and Troubleshooting (2,869 KB)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit 32-bit
Operating Systems
Windows 2000-2003
Version Driver
5.10a10 32-Bit
Size Driver
5.2Mb
File Name
scsiport-5-5.10a10-sp1.zip
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.

This kit contains the following components:

ns5510a10sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 32-Bit
Size Manual
2.8Mb
File Name
manual_ws3.pdf
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 32-Bit
Size Manual
2.9Mb
File Name
manual_w2k.pdf
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Note New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
Note If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, please follow these
Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Note The installation procedure for the driver and utilities has changed from earlier versions. For installation information, see the online Installation manual.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.20a7
Size Driver
17.9Mb
File Name
storportminiportkit_1-20a7-1d.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Base driver, HBAnyware utility 3.0a16 and lputilnt version 1.8a19 (17.9 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a7
Size Manual
3.6Mb
File Name
storport120manual.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note The KB916048 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting (3,264 KB)

Introduction.............................................................................................................. 1
Important Considerations......................................................................................... 2
Changing Driver Types...................................................................................... 2
Microsoft Storport Driver Update ....................................................................... 2
Updating the Storport Miniport Driver Using AutoPilot Installer.......................... 2
Definitions................................................................................................................ 2
Storport Miniport Driver Information ......................................................................... 3
Prerequisites ..................................................................................................... 3
Compatibility...................................................................................................... 3
New in This Release ......................................................................................... 3
Known Issues .................................................................................................... 3
Files Included in this AutoPilot Installer ............................................................. 4
Distribution Executable File Overview ..................................................................... 5
Running the Distribution Executable File ........................................................... 5
AutoPilot Installer..................................................................................................... 6
Introduction ....................................................................................................... 6
Prerequisites ............................................................................................... 6
AutoPilot Installer Features ......................................................................... 6
Configuration Questions.............................................................................. 6
Installation Planning .......................................................................................... 6
AutoPilot Installation Procedures ............................................................................. 7
Hardware-First Installation................................................................................. 7
If the Installation Fails ................................................................................. 8
Software-First Installation .................................................................................. 8
Installing the HBAnyware Security Configurator ...................................................... 9
Unattended Installation .......................................................................................... 10
AutoPilot Configuration File Format................................................................. 10
Mandatory Configuration File Changes ........................................................... 10
Deleting Questions in the APInstall.cfg File ..................................................... 11
Optional Configuration File Changes............................................................... 11
Setting Up Driver Parameters.......................................................................... 14
Setting Up System Parameters ....................................................................... 14
Unattended Error Codes Reference Table....................................................... 14
Invoking AutoPilot Installer .............................................................................. 15
Batch File Example ......................................................................................... 15
Manually Installing or Updating the Storport Miniport Driver .................................. 17
Overview ......................................................................................................... 17
Removing the Adjunct Driver Registry Key...................................................... 17
Manually Installing the Emulex PLUS (ElxPlus) Driver .................................... 17
Manually Updating the Emulex PLUS (ElxPlus) Driver .................................... 18
Manually Installing or Updating the Storport Miniport Driver ............................ 19
Manually Installing the Driver Utilities .............................................................. 20
Uninstalling the Utility Package ....................................................................... 20
Uninstalling the Emulex Drivers....................................................................... 22
Configuration ...........................................................................................................23
Introduction............................................................................................................ 23
Starting HBAnyware from the Desktop ............................................................ 24
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.11x1 32/64-bit
Size Driver
15.1Mb
File Name
storportminiportkit_1-11x1-1a.exe
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions. The 64-bit Itanium Storport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition.
Base driver, HBAnyware utility 2.1a17 and lputilnt version 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.11x1 32/64-bit
Size Manual
2.7Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions. The 64-bit Itanium Storport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
1.10a4 32/64-bit
Size Driver
14.6Mb
File Name
storportminiportkit_1-10a4dc-2e.exe
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 and Windows Server 2003, Datacenter Editions on x86, x64 and Itanium 64-bit platforms.
Note If you are not using Windows Server 2003 Service Pack 1 or KB891793 is required.
Base driver, HBAnyware utility 2.1a16 and lputilnt version 1.8a13 (15,001 KB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Quick Install
Operating Systems
Windows 2003
Version Driver
1.10a4 32/64-bit
Size Driver
498Kb
File Name
quick_installation.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 and Windows Server 2003, Datacenter Editions on x86, x64 and Itanium 64-bit platforms.
Note If you are not using Windows Server 2003 Service Pack 1 or KB891793 is required.
Installing the driver using AutoPilot Installer (498 KB)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.10a4 32/64-bit
Size Manual
2.8Mb
File Name
manual.pdf
Information
Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 and Windows Server 2003, Datacenter Editions on x86, x64 and Itanium 64-bit platforms.
If you are not using Windows Server 2003 Service Pack 1 or KB891793 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit 64-bit
Operating Systems
Windows 2003
Version Driver
1.02a5 64-bit
Size Driver
6.7Mb
File Name
storport-6-1.02a5-1d.zip
Information
Qualification: The 32-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 2.0a20 and lputilnt version 1.7a20

This kit contains the following components:

elxstorinstall5102a5c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps20a20-1a.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the elxstorinstall5102a5c.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the
EmlxApps20a20-1a.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.02a5 64-bit
Size Manual
1.7Mb
File Name
set.pdf
Information
Qualification: The 64-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting (1,821 KB)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Driver Kit 32-bit
Operating Systems
Windows 2003
Version Driver
1.02a5 32-bit
Size Driver
5.6Mb
File Name
storport-5-1.02a5-1d.zip
Information
Qualification: The 32-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Base driver, HBAnyware utility 2.0a20 and lputilnt version 1.7a20

This kit contains the following components:

elxstorinstall5102a5c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps20a20-1a.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the elxstorinstall5102a5c.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the
EmlxApps20a20-1a.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP10000
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.02a5 32-bit
Size Manual
1.7Mb
File Name
set.pdf
Information
Qualification: The 32-bit Storport Miniport driver is Microsoft WHQL qualified for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Note KB891793, which updates Microsoft's storport.sys file, is required.
Installation, Configuration and Troubleshooting (1,821 KB)
HelpDrivers Since March 2000