Emulex LPe1150 Networks Cards > Downloads Drivers, Manual, Firmware and BIOS

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Firmware

Operating System

Firmware

Version

2.50a6

Size Driver

333KB

File Name

wf250a6.zip

Observations

Fibre Channel Host Bus Adapters for Fujitsu Eternus Series Storage Compatibility:

This kit supports the LPe1150 PCI host adapter.

This kit includes the following files:

README.TXT The file you are reading

WF250A6.ALL All firmware components, no boot code

LP6DUTIL.EXE DOS-based diagnostic utility 9.3a6
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a6
Changes and Corrections:

-- Changes and corrections between 2.50a6 and 2.50a5:

Corrected UART interrupt handling to eliminate chance of channel lock up
on first POST after flash is programmed. (CR 18621, 19083)

Corrected a programming error which disabled changing the speed from 1G
during auto speed select.(CR 18858)

Pre-initialize configuration region to avoid errors if host reads it
before the initial configuration is complete. (CR 19177, 19187, 19188)

-- Changes and corrections between 2.50a5 and 2.50a4:

Debounced cable pull indication to allow compatability with a wider
choice of SFP types. (CR 16383, 18304, 18396)

Improved handling of unexpected link events after a DownLink command by
returning to a non-active state after the command is processed.
(CR 17081, 17577, 17606, 18281)

Improved handling of queued data from tape. Recovery of CRC errors
no longer indirectly trigger an abort on slow PCI environments.
(CR 17410, 17510, 17520, 17608, 17610, 17633, 17634, 17635, 18280,
18343)

The maximum IOCB value reported by read_config now reports the correct
number of buffers in the pool. (CR 18223, 18289, 18290, 18348)

Improved buffer handling logic during error conditions to avoid aborted
exchanges. (CR 17701, 18291, 18292, 18349)

Loopback operation has been changed so that loopback activity is not
transmitted to the link. (CR 18311, 18315, 17776, 18301, 18302, 18395)

Improved handling of erroneously-sized ECHO responses. (CR 18330,
18332,18333)

The HBA now transmits all outstanding ACKs before processing any
previously blocked data. (CR 16354, 18334, 18335)

Correct address values are now returned in Dump Table data.
(CR 18313, 18337, 18338)

The transmit queue is now restarted after ACK handling to avoid a
transmit hang in Class 2. (CR 18362, 18363, 18364)

Removed toggle of transmitter during speed negotiation to avoid going
into loopback mode. (CR 18012, 18305, 18392)

Added support for Blade product. (CR 18320, 18321, 18350, 18368, 18370)

Added custom features or configurations as per customer request.
(CR 17479, 17482, 17684, 17688, 17381, 18339, 18340, 18371, 16069,
18282, 18285, 18344)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit RHEL 4

Operating System

Linux - 2.6 Kernel

Version

8.0.16.17

Size Driver

10.9MB

File Name

elxsmiproviderrhel3_4-1.0.12-1.tar.gz

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment

RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction

The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").

This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.

SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.

Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.

NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.

License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.

The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580

On Linux, the default user account is:
User Name: root
Password: pwd580

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Linux - 2.6 Kernel

Version

8.0.16.17

Size Driver

260KB

File Name

lpfc_2.6_driver_kit-8.0.16.17-2.tar.gz

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Base driver, application helper module and install script

1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
3.3 Kernel Upgrade
3.4 Changing Target Timeout
3.4.1 Background
3.4.2 Observed Problem
3.4.3 Workaround
3.5 Machine Check Exception
3.5.1 Observed problem
3.5.2 Workaround
----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex
drivers:

Red Hat Enterprise Linux 4
SuSE Linux Enterprise Server 9

2. Description of Install Procedure

The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.

Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
The 'elxlpfc' init script is also installed and configured to start
and stop the 'lpfcdfc' driver during system startup and shutdown.

3. Release Notes

3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement

For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.9-5.EL kernel would need the
kernel-devel-2.6.9-5.EL package, and a system with the
2.6.9-5.ELsmp kernel would need the kernel-smp-devel-2.6.9-5.EL
package.

3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement

For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC 8.0 driver build to succeed. For
example, a system with the 2.6.5-7.139-bigsmp kernel would need the
kernel-source-2.6.5-7.139 package.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Application helper module

Operating System

Linux - 2.6 Kernel

Version

8.0.16.17

Size Driver

202KB

File Name

lpfc_2.6_ioctl_module_kit-2.0.9-2.tar.gz

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Use this file only with the RHEL 4 Update 2 or SLES9 SP3 distributions, which contain the 8.0.16.17 driver -- do not use with the driver kit above

1. System Requirements
2. Description of Changes
3. Release Notes
3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement

----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex
LPFC Application Helper Module:

Red Hat Enterprise Linux 4 Update 1
SuSE Linux Enterprise Server 9 SP2

2. Description of Changes

The ioctl-install script installs the LPFC Application Helper
Module RPM. This RPM installs the module sources to the
/usr/src/lpfcdfc directory, builds the module for the currently
running kernel, and then installs the module to the proper
directory for the currently running kernel.

Once the RPM is installed, the 'elxlpfc' init script is installed
and configured to start and stop the 'lpfcdfc' driver during system
startup and shutdown.

3. Release Notes

3.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement

For Red Hat Enterprise Linux installations, the kernel development
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.9-6.37.EL kernel would need the
kernel-devel-2.6.9-6.37.EL package, and a system with the
2.6.9-6.37.ELsmp kernel would need the
kernel-smp-devel-2.6.9-6.37.EL package.

3.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement

For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the Application Helper Module build to succeed.
For example, a system with the 2.6.5-7.166-bigsmp kernel would need
the kernel-source-2.6.5-7.166 package.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Applications Kit

Operating System

Linux - 2.6 Kernel

Version

8.0.16.17

Size Driver

165.4MB

File Name

elxlinuxapps-2.1a25-8.0.16.17-1-1.tar

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
HBAnyware utility 2.1a25, lputil 2.0a9 (169 MB tar file)

HBAnyware 2.1a25 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 2.1a25
SSC version 2.1a25
DFC Library version 80.161-5
Lputil version 2.0a9
HBAAPI version 2.1.a

Dependencies:

lpfc driver version 8.0.16.17 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.

Installing HBAnyware

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware

1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

HBAnyware Help:
To view the HBAnyware help pages or to access the Emulex Technical support pages you must have one of the
following web browsers installed:
mozilla, konqueror
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.

/usr/sbin/hbanyware/start_rmserver - This script will re-start the rmserver daemon.
Run this if you manually load the lpfc driver.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit SLES 9.0

Operating System

Linux - 2.6 Kernel

Version

8.0.16.17

Size Driver

11MB

File Name

elxsmiprovidersles9-1.0.12-1.tar.gz

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment

RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction

The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").

This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.

SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.

Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.

NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.

License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.

The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580

On Linux, the default user account is:
User Name: root
Password: pwd580

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Applications Kit

Operating System

Linux 2.4 Kernel

Version

7.3.6

Size Driver

175.7MB

File Name

elxlinuxapps-2.1a29-7.3.6-1-2.tar

Observations

SUSE Linux Enterprise Server 8 Service Pack 4 (Intel x86, Intel Itanium2, Intel and AMD x86-64 architectures)
Red Hat Enterprise Linux 2.1 Updates 7 and 8 (Intel x86 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 3 Updates 6 and 7 (Intel x86, Intel Itanium2, Intel and AMD x86-64 architectures)
HBAnyware utility 2.1a29, lputil 2.0a12 (175 MB tar file)

HBAnyware 2.1a29 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 2.1a29
SSC version 2.1a29
DFC Library version 1.2.1-1
Lputil version 2.0a12
HBAAPI version 2.0.f

Dependencies:

lpfc driver version 7.3.6 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.

Installing HBAnyware

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware

1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit RHEL 3

Operating System

Linux 2.4 Kernel

Version

7.3.2

Size Driver

10.9MB

File Name

elxsmiproviderrhel3_4-1.0.12-1.tar.gz

Observations

SUSE Linux Enterprise Server 8 Service Pack 3 (x86 and x64 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 2.1 Updates 5 and 6 (x86 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 3 Updates 2, 3, 4 and 5 (x86 and x64 and Intel Itanium2 architectures)
SMI-S HBA Provider, compliant with the SMI-S 1.0.2 specification and certified against the SNIA-CTP v1.0.2.23 suite
Pre-packaged with OpenPegasus CIMOM v2.3.2, as a turnkey SMI-S agent for ease of installation and deployment

RELEASE NOTES for Emulex SMI-S HBA Provider
Version 1.0.12
SECTION 1. Introduction
SECTION 2. System Prerequisites
SECTION 3. Supported and Tested Operating Systems
SECTION 4. Installation
SECTION 5. Directory Structure
SECTION 6. Known Limitations
SECTION 7. Frequently Asked Questions
SECTION 1. Introduction

The Emulex SMI HBA Provider is integrated/bundled with OpenPegasus Common
Information Model Object Manager (CIMOM) as a pre-packaged, ready to deploy
SMI-S agent. This package incorporates version 2.3.2 of the OpenPegasus
CIMOM ("http://www.openpegasus.org").

This release supports the FC HBA profile, Server profile and a partial
implementation of the Host Discovered Resources (HDR) profile. The Emulex
SMI-S HBA Provider is certified by SNIA Conformance Testing Program (CTP)
v1.0.2.23, and it is fully compliant with SMI-S v1.0.2.

SLPD (Service Location Protocol) is included with the Emulex SMI-S HBA Provider
kit and run by default if the system does not have one. For security purposes,
you might want to replace the sample certificates (privkey.cert and elxhba.cert)
with your own signed certificates.

Please refer to "http://www.openssl.org/docs/HOWTO/" for more details on how
to create a certificate.

NOTE: The OpenSSL library was built to exclude support for the IDEA, MDC2
and RC5 encryption algorithms.

License agreements for these Open Source components and the Emulex software
are found in the ancillary.txt file.

The Emulex SMI-S HBA Provider is registered under the namespace: root/emulex.
By default, the following account is created only on Windows:
User Name: cimadmin
Password: pwd580

On Linux, the default user account is:
User Name: root
Password: pwd580

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Applications Kit

Operating System

Linux 2.4 Kernel

Version

7.3.2

Size Driver

175.3MB

File Name

elxlinuxapps-2.1a24-7.3.2-1-2.tar

Observations

SUSE Linux Enterprise Server 8 Service Pack 3 (x86 and x64 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 2.1 Updates 5 and 6 (x86 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 3 Updates 2, 3, 4 and 5 (x86 and x64 and Intel Itanium2 architectures)
HBAnyware utility 2.1a24, lputil 2.0a9 (175 MB tar file)

HBAnyware 2.1a24 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 2.1a24
SSC version 2.1a24
DFC Library version 1.2.1-1
Lputil version 2.0a9
HBAAPI version 2.0.f

Dependencies:

lpfc driver version 7.3.2-1 or later
HBAnyware is dependant on lpfc being installed, so install lpfc first if it is not already installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.

Installing HBAnyware

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. su to root
5. Run the install script: ./install
Uninstalling HBAnyware

1. Complete steps 1 through 4 from "Installing HBAnyware" above.
2. Run the uninstall script: ./uninstall
Running the HBAnyware GUI

1. su to root
2. Run the script /usr/sbin/hbanyware/hbanyware
ppc64/sles8 NOTE:
If you want to use the 64bit HBAAPI libraries you must replace the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib/libemulexhbaapi.so
with this line
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

ppc64/(non-sles8) and amd64 NOTE:
If you want to use the 64bit HBAAPI libraries you must add the following line in /etc/hba.conf:
com.emulex.emulexapilibrary /usr/lib64/libemulexhbaapi.so

HBAnyware Help:
To view the HBAnyware help pages or to access the Emulex Technical support pages you must have one of the
following web browsers installed:
mozilla, konqueror
Helpful scripts

/usr/sbin/hbanyware/stop_hbanyware - This script will stop all HBAnyware daemons and GUIs.
Run this if you need to unload the driver.

/usr/sbin/hbanyware/start_rmserver - This script will re-start the rmserver daemon.
Run this if you manually load the lpfc driver.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit SLES 8.0

Operating System

Linux 2.4 Kernel

Version

7.3.2

Size Driver

14.8MB

File Name

elxsmiprovidersles8-1.0.12-1.tar.gz

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Linux 2.4 Kernel

Version

7.3.2

Size Driver

297KB

File Name

lpfc_2.4_driver_kit-7.3.2-1.tar.gz

Observations

SUSE Linux Enterprise Server 8 Service Pack 3 (x86 and x64 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 2.1 Updates 5 and 6 (x86 and Intel Itanium2 architectures)
Red Hat Enterprise Linux 3 Updates 2, 3, 4 and 5 (x86 and x64 and Intel Itanium2 architectures)
Base driver, application helper module and install script
(297 KB gz file)

1. System Requirements
2. Description of Changes
3. Driver Installation
4. Driver Uninstallation
5. Errata

----------------------------------------------------------------------

1. System Requirements

The Emulex LPFC driver and LPFC DFC driver RPMs require gcc compiler
tools and the kernel sources for the running kernel be installed on
the system in order for the RPM installation to succeed. The following
distributions of Linux are supported by the Emulex drivers:

Red Hat Enterprise Linux 3
Red Hat Enterprise Linux 2.1
SuSE Linux Enterprise Server 8 with Service Pack 3

2. Description of Changes

The lpfc-install script installs both the LPFC driver and the LPFC
DFC driver RPMs. These RPMs install their driver sources to the
/usr/src/lpfc directory, build their drivers for the currently
running kernel, and then install the drivers to the proper
directory for the currently running kernel.

Once the RPMs are installed, the lpfc-install script creates a new
ramdisk for the currently running kernel so that the 'lpfc' driver
is loaded when the kernel is initialized during system startup.
The 'elxlpfc' init script is also installed and configured to start
and stop the 'lpfcdfc' driver during system startup and shutdown.

3. Driver Installation

Please refer to the LPFC Linux 7.3 documentation on the Emulex
website at http://www.emulex.com for an installation manual that
includes a complete set of options for the lpfc-install program.

Emulex strongly recommends uninstalling any old LPFC driver kits
before installing the new driver kit. Please refer to the "Driver
Uninstallation" section to uninstall previous versions of the
Emulex LPFC 7.x or older driver.

Log in as the user 'root' to a terminal, change to the directory in
which the Emulex LPFC 7.3 driver kit is installed, and execute the
'lpfc-install' script with no options to install the driver:

./lpfc-install

Once the 'lpfc-install' script has completed successfully, the
Emulex LPFC and LPFC DFC drivers will be loaded, and fibre channel
disks that are properly connected to the system should be
accessible. However, a reboot of the system is recommended to load
the 'lpfc' driver through the ramdisk.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Linux 2.4 Kernel

Version

7.3.6

Size Driver

300KB

File Name

lpfc_2.4_driver_kit-7.3.6-2.tar.gz

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Windows 2003

Operating System

Manual

Version

1.11a3

Size Driver

2.7MB

File Name

manual.pdf

Observations

Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions. The 64-bit Itanium Storport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Windows 2000-2003

Operating System

Manual

Version

5.30a2

Size Driver

4.3MB

File Name

manual.pdf

Observations

SCSIport Miniport Driver
Windows Server 2003 Upgrade Notice: If you are currently running the Emulex SCSIport Miniport driver version 5.10a10 or earlier, follow these Upgrade Instructions before upgrading from Windows 2000 Server to Windows Server 2003.
Qualification: The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms. The 64-bit Itanium SCSIport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition. The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Windows 2000-2003

Operating System

Manual

Version

1.20a3

Size Driver

3.7MB

File Name

manual.pdf

Observations

Qualification: The Storport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003 on x86 and Itanium 64-bit platforms and Windows Server 2003 x64 Editions. The 64-bit Itanium Storport Miniport driver is also Microsoft WHQL qualified and digitally signed for Windows Server 2003, Datacenter Edition.
Note The KB916048 or KB891793 update to the Microsoft Storport driver is required.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Linux - 2.6 Kernel

Operating System

Manual

Version

8.0.16.17

Size Driver

2.3MB

File Name

manual.pdf

Observations

SUSE Linux Enterprise Server 9 Service Pack 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Red Hat Enterprise Linux 4 Update 1 or later (x86 and x64, Intel Itanium2 and PowerPC 64-bit architectures)
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Linux 2.4 Kernel

Operating System

Manual

Version

7.3.6

Size Driver

6MB

File Name

set.pdf

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Manual

Information

Boot Code

Operating System

Manual

Version

1.70a3

Size Driver

4.9MB

File Name

bootcode.pdf

Observations

Fibre Channel Host Bus Adapters for Fujitsu Eternus Series Storage
Platform: Intel (32-bit) Introduction..............................................................................................................1
Emulex Boot Code Files....................................................................................1
Boot from SAN.........................................................................................................2
Windows Server 2008 and Windows Server 2003.............................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (x86 and x64)..........................................................2
Configure Boot from SAN on Windows Server 2008 and Windows Server 2003 (Itanium)..................................................................3
New Installation of Windows 2008 UEFI- Aware Operating System
on a UEFI-based x64 Server.................................................................3
Direct a UEFI-Based Server to a Windows Server 2008 OS Image (Installed as UEFI-Aware) Already Installed on the SAN.......................4
The GUID Partition Table......................................................................4
Install Windows Server 2008 on an FC Boot Disk (x86, x64 and Itanium)...5
Install Windows Server 2003 on an FC Boot Disk (x86, and x64
and Itanium)................................................................................................6
Linux and VMware.............................................................................................7
Configure Boot from SAN on Linux or VMware (x86 and x64).....................7
Configure Boot from SAN on Linux (PowerPC)...........................................7
Configure Boot from SAN on Linux (Itanium)..............................................7
Solaris...............................................................................................................8
Configure Boot from SAN on Solaris SFS (x86 and x64)............................8
Determine LUNs to Select for Boot from SAN.......................................8
Configure Boot from SAN on Solaris SFS (SPARC)....................................8
Configure Boot from SAN on Solaris LPFC (SPARC)..................................9
Install Solaris from a Network Image..................................................10
Install Solaris by Migrating an Image from a Local SCSI Disk.............11
Install, Update and Enable Boot Code...................................................................14
BIOS Utility............................................................................................................15
Start the BIOS Utility.................................................................................15
Enable an Adapter to Boot from SAN........................................................17
Configure Boot Devices...................................................................................17
Configure Adapter Parameters........................................................................21
Change the Default AL_PA (Arbitrated Loop Physical Address)................22
Change the PLOGI Retry Timer................................................................23
Change Topology......................................................................................24
Enable or Disable the Spinup Delay..........................................................25
Set Auto Scan...........................................................................................26
Enable or Disable EDD 3.0.......................................................................27
Enable or Disable the Start Unit Command...............................................28
Enable or Disable the Environment Variable.............................................29
Enable or Disable Auto Boot Sector..........................................................30
Change Link Speed...................................................................................31
Reset to Default Values.............................................................................32
Use Multi-Path Boot from SAN..................................................................33
OpenBoot..............................................................................................................34
Attribute Commands.................................................................................34
Functional Commands..............................................................................35
EFIBoot.................................................................................................................37
Install the EFI Utility..................................................................................37
Start the EFI Utility....................................................................................38

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit

Operating System

Windows 2000-2003

Version

1.20a3

Size Driver

6.9MB

File Name

elxsmiprovider1.0.12-1.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Windows 2000-2003

Version

1.20a3

Size Driver

19MB

File Name

storportminiportkit_1-20a3-1h.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Windows 2000-2003

Version

5.30a2

Size Driver

18.4MB

File Name

scsiportminiportkit_5-30a2-1d.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

Driver Kit

Operating System

Windows 2003

Version

1.11a3

Size Driver

15.1MB

File Name

storportminiportkit_1-11a3-1b.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for Fujitsu

Model

Emulex LPe1150

Description

SMI-S Provider Kit

Operating System

Windows 2003

Version

1.11a3

Size Driver

6.9MB

File Name

elxsmiprovider1.0.12-1.exe

Observations

Access to Official Website Emulex

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 27 files for Emulex LPe1150

Select Files