Emulex LP7000E Download Drivers and Manual

Available 47 files for LP7000E
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Complete Manual
Operating Systems
Linux 2.4 Kernel
Version Manual
2.01g
Size Manual
2.6Mb
File Name
set.pdf
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
Includes the Installation, Configuration and Troubleshooting sections
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Dynamic LUN and Target Addition Script
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
343 Bytes
File Name
force_lpfc_scan.sh
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
This script enables you to dynamically add LUNs and targets without unloading or reloading the lpfcdd module and without resetting the adapter.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Stand-alone driver for all supported platforms with no utility
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
287Kb
File Name
lpfcdriver-2.01g.tgz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6

This Application kit has been designed for the following environment:

- Supported Hardware architecture platforms:
- 32-bit Intel platforms (I386)
- 64-bit Intel platforms (IA64)
- 64-bit Power PC platforms (PPC64)

- Supported Linux Distributions:
Redhat Enterprise Linux AS 2.1
Redhat Enterprise Linux AS 3
SuSE SLES 8
Please refer to Emulex Website (www.emulex.com) for an update and accurate list of kernel versions.


- Supported Emulex enterprise adapters:
- LP10000DC
- LP10000
- LP1050DC
- LP1050
- LP9802DC
- LP9802
- LP982
- LP9402DC
- LP9002DC
- LP9002L
- LP9000
- LP952L
- LP8000DC
- LP8000

- This driver supports any mix of the above Emulex adapters within a single host system.

Main driver features:
1. Full fabric support, discovery, FCP and fibre channel device/error and exception handling
2. Concurrent multi-protocol (FCP and IP) support
3. Supports INT13 (EDD 2.1/3.0) fabric boot.
4. This driver is entirely self-contained and intended for configuration using lpfc. No external utility is required or supported.
5. This driver will not be dependent on any non-open source program for its execution. It will not taint an open source kernel.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 3.0, update 2,
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
590Kb
File Name
rhas3u2_x86-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 3.0, update 2,
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
237Kb
File Name
rhel3u2_ia64-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. SUSE Linux Enterprise Server 8, Service Pack 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
1Mb
File Name
sles8sp3rc4_x86-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. SUSE Linux Enterprise Server 8, Service Pack 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
706Kb
File Name
sles8sp3_ia64-2.01g-2.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 2.1, update 4
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
829Kb
File Name
rhas21u4_x86-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 2.1, update 4
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
455Kb
File Name
rhas21_ia64-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
665Kb
File Name
sles8sp3_i386-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
704Kb
File Name
sles8sp3_ia64-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 3, update 1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
597Kb
File Name
as3u1.i686-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 3, update 1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
237Kb
File Name
rhel30u1_ia64-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 2.1, update 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
595Kb
File Name
as21u3.i686-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver disk images include only the driver with no utility. Red Hat Enterprise Linux AS version 2.1, update 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
455Kb
File Name
rhas21u3_ia64-2.01g.img.gz
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
5.7Mb
File Name
linux-2.01g-i386-sl8-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-SL8-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-SL8-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
10.7Mb
File Name
linux-2.01g-i386-sl8-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-SL8-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-SL8-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
6.1Mb
File Name
linux-2.01g-ia64-sl8-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-SL8-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-SL8-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. SUSE Linux Enterprise Server 8
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
11.2Mb
File Name
linux-2.01g-ia64-sl8-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-SL8-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-SL8-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
4.9Mb
File Name
linux-2.01g-i386-rh3.0-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-RH3.0-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-RH3.0-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
10Mb
File Name
linux-2.01g-i386-rh3.0-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-RH3.0-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-RH3.0-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
5.2Mb
File Name
linux-2.01g-ia64-rh3.0-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-RH3.0-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-RH3.0-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 3
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
10.4Mb
File Name
linux-2.01g-ia64-rh3.0-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-RH3.0-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-RH3.0-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 2.1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
5.1Mb
File Name
linux-2.01g-i386-rh2.1-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-RH2.1-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-RH2.1-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 2.1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
10.3Mb
File Name
linux-2.01g-i386-rh2.1-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
32-bit Intel Architecture

This kit contains the following components:

lpfcdriver-2.01g-1.i386.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-i386-RH2.1-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-i386-RH2.1-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 2.1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
5.8Mb
File Name
linux-2.01g-ia64-rh2.1-rpm-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.rpm - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-RH2.1-RPM.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-RH2.1-RPM.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Device driver Kits include both a driver and a utility Kit. Red Hat Enterprise Linux 2.1
Operating Systems
Linux 2.4 Kernel
Version Driver
2.01g
Size Driver
11.3Mb
File Name
linux-2.01g-ia64-rh2.1-tar-1a.tar
Information
Tested distributions for 32-bit Intel and 64-bit Itanium Processor Family architectures
Red Hat Enterprise Linux 2.1 including all published updates
Red Hat Enterprise Linux 3.0 including all published updates
Utility - Remote Management Utility (HBAnyware) version 2.0a13 and Diagnostic Utility (lputil) version 1.6a6
64-bit Itanium Processor Family

This kit contains the following components:

lpfcdriver-2.01g-1.ia64.tar - Emulex Fibre Channel Linux Driver
EmlxApps300a6-ia64-RH2.1-TAR.tar - Emulex Applications kit
readme.first.txt - this file

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found on the
Emulex website - www.emulex.com, under /ts/docfc/linuxframe.htm.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications kit
can be found in the README.txt file contained in the EmlxApps300a6-ia64-RH2.1-TAR.tar package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Manual
2.11b
Size Manual
465Kb
File Name
set.pdf
Information
Downloading the Emulex Driver for NetWare
Version 2.11b
Table of ContentsPrerequisitesCompatibilityThings to Know Before You DownloadChanges and CorrectionsKnown IssuesFiles Included in this Release

Installing the Emulex Driver for NetWare
Version 2.11b
Table of ContentsDriver InformationInstall Driver on New Netware ServerInstall Driver on Existing Netware ServerUsing an Emulex HBA to Boot Netware 6.5Load and Update BootBIOS

Configuring the Emulex Driver for NetWare
Version 2.11b
Table of ContentsIntroductionDriver ParametersSpecial Command Line Parameters
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Driver
2.11b
Size Driver
53Kb
File Name
nw211b.zip
Information
Emulex LightPulse PCI Fibre Channel Adapter
for Novell Netware 5.1, 6.0, and 6.5

Emulex Corporation

Release 2.11b Oct 19, 2003
This Readme file contains the description of the 2.11b version of the
LPFC.HAM driver for the Emulex LightPulse adapter family and Novell
NetWare 5.0, 5.1, and 6.0. It provides support for switched Fabric
operation and multi-initiator environments and for up to 16 adapter
channels using single or dual channel HBAs.

The Emulex LPFC.HAM driver has been tested in the following
environments:

1. OS Versions:
- Netware 6.5
- NetWare 6.0 with Service Pack 3 (SP3) and MM6UP1A patches
- NetWare 5.1 with Service Pack 6 (SP6)
- Netware 5.0 with Service Pack 6a. Netware 5.0 is supported by Novell, however no future work is planned for this version.
- NetWare 4.2 is not supported at this time; use Emulex driver version 1.23c to support NetWare 4.2.
2. Arbitrated Loop Environment
3. Switched Fabric Environment
4. Emulex Fibre Channel adapters
- LP10000 series adapters (minimum firmware revision 1.80a0)
- LP1050 series adapters (minimum firmware revision 1.80a0)
- LP9802DC, LP9802 and LP982 (minimum firmware version 1.00a4)
- LP9402DC, LP9002L, LP9002DC, LP9000 or LP952L (recommended firmware version 3.90a7)
- LP8000, LP8000DC and LP850
-- If your HBA has a Dragonfly chip version 2.00 or greater
use firmware version 3.90a7.
-- If your HBA has a Dragonfly chip below version 2.00,
use firmware version 3.30a7.
- LP7000E (minimum firmware version 3.21a0)
5. Suitable target hardware; lpfc.ham complies with SAN protocols
for switched fabrics and arbitrated loops.

This release includes the following files:

1. LPFC.HAM - Emulex Fibre Channel adapter HAM driver
2. lpfc.ddi - driver description file
3. readme.txt - readme file (this file)
INSTALLATION INSTRUCTIONS ON AN EXISTING NETWARE SERVER:

1. The server must support PCI 2.2 standard slots or PCI-X 1.1
standard slots.

2. At the server console load the install program. On
Netware 6.5 enter

LOAD HDETECT

On Netware 6.0, 5.1, or 5.0, enter

LOAD NWCONFIG

3. Select "Driver Options".

4. Select "Configure disk and storage device drivers".

5. Select "Select an additional driver".

6. Press to install a driver not on the list.
(If there is a previously installed version of the driver,
this will update and replace it).
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Manual
2.12b
Size Manual
484Kb
File Name
set.pdf
Information
Novell "YES" Tested and Approved
Installation, Configuration and Troubleshooting

Downloading the Emulex Driver for NetWare
Version 2.12b
Table of Contents
Prerequisites
Compatibility
Things to Know Before You Download
Changes and Corrections
Known Issues
Files Included in this Release

Installing the Emulex Driver for NetWare
Version 2.12b
Table of Contents
Driver Information
Install Driver on New Netware Server
Install Driver on Existing Netware Server
Using an Emulex HBA to Boot Netware 6.5
Load and Update BootBIOS

Configuring the Emulex Driver for NetWare
Version 2.12b
Table of Contents
Introduction
Driver Parameters
Special Command Line Parameters
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Driver
2.12b
Size Driver
53Kb
File Name
nw212b.zip
Information
Novell "YES" Tested and Approved
Base driver

Emulex LightPulse PCI Fibre Channel Adapter
for Novell Netware 5.1, 6.0, and 6.5

Emulex Corporation

Release 2.12b Feb 12, 2004
This Readme file contains the description of the 2.12a version
of the LPFC.HAM driver for the Emulex LightPulse adapter family
and Novell NetWare 5.1, 6.0 and 6.5. It provides support for
switched Fabric operation and multi-initiator environments and
for up to 16 adapter channels using single or dual channel HBAs.

The Emulex LPFC.HAM driver has been tested in the following
environments:

1. OS Versions:
- Netware 6.5 with Service Pack 1
- NetWare 6.0 with Service Pack 3 (SP3) and MM6UP1A patches
- NetWare 5.1 with Service Pack 6 (SP6)
- untested with Netware 5.0 with Service Pack 6a (SP6a).
Netware 5.0 is supported by Novell, however no future work is planned for this version.
- NetWare 4.2 is not supported at this time; use Emulex driver version 1.23c to support NetWare 4.2.
2. Arbitrated Loop Environment
3. Switched Fabric Environment
4. Emulex Fibre Channel adapters
- LP10000 series adapters (minimum firmware revision 1.80a0)
- LP1050 series adapters (minimum firmware revision 1.80a0)
- LP101 series adapters (minimum firmware revision 1.82a0)
- LP9802DC, LP9802 and LP982 (minimum firmware version 1.01a2)
- LP9402DC, LP9002L, LP9002DC, LP9000 or LP952L (recommended firmware version 3.90a7)
- LP8000, LP8000DC and LP850
-- If your HBA has a Dragonfly chip version 2.00 or greater
use firmware version 3.90a7.
-- If your HBA has a Dragonfly chip below version 2.00,
use firmware version 3.30a7.
- LP7000E (minimum firmware version 3.21a0)
5. Suitable target hardware; lpfc.ham complies with SAN protocols
for switched fabrics and arbitrated loops.

This release includes the following files:

1. LPFC.HAM - Emulex Fibre Channel adapter HAM driver
2. lpfc.ddi - driver description file
3. readme.txt - readme file (this file)
INSTALLATION INSTRUCTIONS ON AN EXISTING NETWARE SERVER:

1. The server must support PCI 2.2 standard slots or PCI-X 1.1
standard slots.

2. At the server console load the install program. On
Netware 6.5 enter

LOAD HDETECT

On Netware 6.0, 5.1, or 5.0, enter

LOAD NWCONFIG

3. Select "Driver Options".

4. Select "Configure disk and storage device drivers".

5. Select "Select an additional driver".

6. Press to install a driver not on the list.
(If there is a previously installed version of the driver,
this will update and replace it).
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Manual
2.14b
Size Manual
452Kb
File Name
set.pdf
Information
Downloading the Emulex Driver for NetWare
Version 2.14b
Table of Contents
Supported Features
New Features in this Release
Prerequisites
Compatibility
Things to Know Before You Download
Known Issues
Files Included in this Release

Installing the Emulex Driver for NetWare
Version 2.14b
Table of Contents
Driver Information
Install Driver on New Netware Server
Install Driver on Existing Netware Server
Using an Emulex HBA to Boot Netware 6.5
Load and Update BootBIOS

Configuring the Emulex Driver for NetWare
Version 2.14b
Table of Contents
Introduction
Driver Parameters
Special Command Line Parameters

Troubleshooting the Emulex Driver for NetWare
Version 2.14b
Table of Contents
Introduction
Failback Detection Not Automatic
Only Eight LUNS are Seen
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit
Operating Systems
NetWare 5.0, 5.1, 6.0 and 6.5
Version Driver
2.14b
Size Driver
54Kb
File Name
nw214b.zip
Information
Emulex LightPulse PCI Fibre Channel Adapter
for Novell Netware 5.1, 6.0, and 6.5

Emulex Corporation

Release 2.14b Jul 09, 2004
This Readme file contains the description of the 2.14b version
of the LPFC.HAM driver for the Emulex LightPulse adapter family
and Novell NetWare 5.1, 6.0 and 6.5. It provides support for
switched Fabric operation and multi-initiator environments and
for up to 16 adapter channels using single or dual channel HBAs.

The Emulex LPFC.HAM driver has been tested in the following
environments:

1. OS Versions:
- Netware 6.5 with Service Pack 2 (NW65SP2)
- NetWare 6.0 with Service Pack 4 (NW6SP4 )
- NetWare 5.1 with Service Pack 7 (NW51SP7)
- untested with Netware 5.0 with Service Pack 6a (SP6a).
Netware 5.0 is supported by Novell, however no future work is planned for this version.
- NetWare 4.2 is not supported at this time; use Emulex driver version 1.23c to support NetWare 4.2.
2. Arbitrated Loop Environment
3. Switched Fabric Environment
4. Emulex Fibre Channel adapters
- LP10000 series adapters (minimum firmware revision 1.90a4)
- LP1050 series adapters (minimum firmware revision 1.90a4)
- LP101 series adapters (minimum firmware revision 1.82a0)
- LP9802DC, LP9802 and LP982 (minimum firmware version 1.90a4)
- LP9402DC, LP9002L, LP9002DC, LP9000 or LP952L (recommended firmware version 3.92a2)
- LP8000, LP8000DC and LP850
-- If your HBA has a Dragonfly chip version 2.00 or greater
use firmware version 3.92a2.
-- If your HBA has a Dragonfly chip below version 2.00,
use firmware version 3.30a7.
- LP7000E (minimum firmware version 3.21a0)
5. Suitable target hardware; lpfc.ham complies with SAN protocols
for switched fabrics and arbitrated loops.

This release includes the following files:

1. LPFC.HAM - Emulex Fibre Channel adapter HAM driver
2. lpfc.ddi - driver description file
3. readme.txt - readme file (this file)
INSTALLATION INSTRUCTIONS ON AN EXISTING NETWARE SERVER:

1. The server must support PCI 2.2 standard slots or PCI-X 1.1
standard slots.

2. At the server console load the install program. On
Netware 6.5 enter

LOAD HDETECT

On Netware 6.0, 5.1, or 5.0, enter

LOAD NWCONFIG

3. Select "Driver Options".

4. Select "Configure disk and storage device drivers".

5. Select "Select an additional driver".
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting
Operating Systems
Windows 2000-2003
Version Manual
2.22a8 32-Bit
Size Manual
1.8Mb
File Name
set_w2k.pdf
Information
Qualification: 32-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
For Windows 2000 drivers, Service Pack 4 is required for cluster configurations.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 32-bit
Operating Systems
Windows 2000-2003
Version Driver
2.22a8 32-Bit
Size Driver
5.4Mb
File Name
port-5-2.22a8-3a.zip
Information
Qualification: 32-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003 and Windows 2000 Server.
For Windows 2000 drivers, Service Pack 4 is required for cluster configurations.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8

This kit contains the following components:

sli222a8win2ks.zip - Emulex Fibre Channel Multi-protocol Port Driver
EmlxApps300a7.zip - Emulex Applications kit
Readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the sli222a8win2ks.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a7.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting
Operating Systems
Windows 2000-2003
Version Manual
2.22a8 64-Bit
Size Manual
1.9Mb
File Name
set_ws3.pdf
Information
Qualification: 64-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 64-bit
Operating Systems
Windows 2000-2003
Version Driver
2.22a8 64-Bit
Size Driver
6.3Mb
File Name
port-6-2.22a8-3b.zip
Information
Qualification: 64-bit FC Port driver is Microsoft WHQL qualified for Windows Server 2003.
Windows Server 2003 SP1 Upgrade Notice
New versions are available for all Emulex drivers that include support for Windows Server 2003 SP1. We recommend that you upgrade to one of these new drivers. In most cases, older drivers can be configured to work with SP1 by running the HBA API-SP1 Migration program prior to installing SP1.
SP1/R2 Boot Failure with FC Port 2.22a8
Windows Server 2003 will not boot after an installation of SP1 or R2 with FC Port 2.22a8. The only way to boot SP1 is to disconnect the Fibre Channel cables. If you are using FC Port 2.22a8, you should update to an SP1-supported Emulex driver prior to installing SP1. Confirm with your Emulex HBA service provider as to which Emulex driver versions have been qualified for use with SP1 and their products. If you have installed SP1 with FC Port driver version 2.22a8
Base driver, HBAnyware utility 2.0a13 and elxcfg version 1.41a14

This kit contains the following components:
sli222a8ia64c.zip - Emulex Fibre Channel Multi-protocol Port Driver
Emlx64Apps300a7.zip - Emulex Applications kit
Readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the sli222a8ia64c.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
Emlx64Apps300a7.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Operating Systems
Windows 2000-2003
Version Manual
5.10a9 32-Bit
Size Manual
2.2Mb
File Name
manual_w2k.pdf
Information
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Operating Systems
Windows 2000-2003
Version Manual
5.10a9 32-Bit
Size Manual
2.1Mb
File Name
manual_ws3.pdf
Information
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 32-bit Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
Operating Systems
Windows 2000-2003
Version Driver
5.10a9 32-Bit
Size Driver
5.2Mb
File Name
scsiport-5-5.10a9-sp1.zip
Information
Qualification: The 32-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs for Windows Server 2003 and Windows 2000 Server and Workstation products (Service Pack 2 or above).

This kit contains the following components:

ns5510a9sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated to install
the hbaapi.dll file in the Emulex utilities directory to be compatible with
Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns5510a9sc.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
applications kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting
Operating Systems
Windows 2000-2003
Version Manual
5.10a9 64-Bit
Size Manual
2.1Mb
File Name
manual_ws3.pdf
Information
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 64-bit Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
Operating Systems
Windows 2000-2003
Version Driver
5.10a9 64-Bit
Size Driver
6.1Mb
File Name
scsiport-6-5.10a9-sp1.zip
Information
Qualification: The 64-Bit SCSIport Miniport driver is qualified and digitally signed by WHQL labs.

This kit contains the following components:

ns6510a9dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the ns6510a9dc.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting for Windows 2000 Server
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 32-Bit
Size Manual
2.9Mb
File Name
manual_w2k.pdf
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting for Windows Server 2003
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 32-Bit
Size Manual
2.8Mb
File Name
manual_ws3.pdf
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 32-bit Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
Operating Systems
Windows 2000-2003
Version Driver
5.10a10 32-Bit
Size Driver
5.2Mb
File Name
scsiport-5-5.10a10-sp1.zip
Information
Qualification: The 32-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows Server 2003, and it is Microsoft WHQL qualified and digitally signed for Windows 2000 Server The SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for Windows 2000 Server.
For Windows 2000 Server, Service Pack 4 is required.

This kit contains the following components:

ns5510a10sc.zip - Emulex Fibre Channel SCSIport Miniport Driver
EmlxApps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Manual Installation, Configuration and Troubleshooting
Operating Systems
Windows 2000-2003
Version Manual
5.10a10 64-Bit
Size Manual
2.8Mb
File Name
manual_ws3.pdf
Information
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP7000E
Description
Driver Kit 64-bit Base driver, HBAnyware utility 2.0a21 and lputilnt 1.7a21
Operating Systems
Windows 2000-2003
Version Driver
5.10a10 64-Bit
Size Driver
6.1Mb
File Name
scsiport-6-5.10a10-sp1.zip
Information
Qualification: The 64-bit SCSIport Miniport driver is Microsoft WHQL qualified and digitally signed for both Windows Server 2003 and Windows Server 2003, Datacenter Edition.

This kit contains the following components:

ns6510a10dc.zip - Emulex Fibre Channel SCSIport Miniport Driver
Emlx64Apps20a21-SP1.zip - Emulex Applications kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

The installation for the Emulex Applications Kit has been updated
to install the hbaapi.dll file in the Emulex utilities directory
to be compatible with Windows Server 2003 Service Pack 1.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
HelpDrivers Since March 2000