Emulex LP21000-C-E Networks Cards > Downloads Drivers, Utilities, Manual, Firmware and BIOS

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

x86 BootBIOS

Operating System

Boot Code

Version

2.02a2

Size Driver

38KB

File Name

ab202a2.zip

Observations

Converged Network Adapter for Symmetrix and CLARiiON
BootBIOS for x86 platforms and x64 platforms that support legacy BIOS. The adapter boot BIOS provides x86 boot capability through the use of INT13
system BIOS calls. The adapter Boot BIOS supports:

(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
topologies.
(2) Multi-initiators: The adapter BIOS supports up to 32 Emulex LightPulse
adapters in a system.
(3) Multi-LUNs: The adapter BIOS supports up to 256 LUNs.
(4) Multi-boot: The adapter BIOS complies with the BIOS Boot Specification
(BBS).
(5) EDD (Enhanced Disk Drive Services): The adapter BIOS supports both the
EDD 3.0 and EDD 2.1 specifications depending on the selection in the
adapter BIOS configuration utility.
(6) Boot fail over feature: There are eight boot entries that can be
configured in the adapter BIOS configuration utility. If the first boot
entry fails the system is still able to boot from the second configured
boot entry and so on.
\2.02a2.txt this file you are reading

\DB202a2.PRG Lp8000 adapter boot BIOS version 2.02a2
\CB202a2.PRG Lp9000 adapter boot BIOS version 2.02a2
\HB202a2.PRG Lp9802 adapter boot BIOS version 2.02a2
\TB202a2.PRG Lp10000 adapter boot BIOS version 2.02a2
\BB202a2.PRG Lp11000 adapter boot BIOS version 2.02a2
\QB202a2.PRG Lp850 adapter boot BIOS version 2.02a2
\RB202a2.PRG Lp952 adapter boot BIOS version 2.02a2
\LB202a2.PRG Lp982 adapter boot BIOS version 2.02a2
\MB202a2.PRG Lp1050 adapter boot BIOS version 2.02a2
\JB202a2.PRG Lp1150 adapter boot BIOS version 2.02a2
\EB202a2.PRG Lp101 adapter boot BIOS version 2.02a2
\YB202a2.PRG LPe111 adapter boot BIOS version 2.02a2
\AB202a2.PRG Lp21000 adapter boot BIOS version 2.02a2
\WB202a2.PRG LPe1150 adapter boot BIOS version 2.02a2
\ZB202a2.PRG LPe11000 adapter boot BIOS version 2.02a2
\UB202a2.PRG LPe12000 adapter boot BIOS version 2.02a2
\OB202a2.PRG LPe1250 adapter boot BIOS version 2.02a2
\PB202a2.PRG LPe121 adapter boot BIOS version 2.02a2

***** Important Note ******

(1) BIOS downloading

The adapter boot BIOS image has increased in size to 49K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the
problem is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc) and then download the adapter boot BIOS .prg file.
(2) BIOS was not activated (Enabled)

If the adapter boot BIOS is not enabled by LP6DUTIL or an Emulex O.S.
configuration utility, the adapter and the drives connected to the adapter
cannot not be configured to be used to boot the system. In addition if there is
a "No BIOS support" message displayed next to this adapter in the adapter BIOS
configuration utility the user must use LP6DUTIL or other Emulex O.S.
configuration utility to enable the adapter boot BIOS in order to allow this adapter
to be used a bootable controller by the host system.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Open Boot

Operating System

Boot Code

Version

3.10a3

Size Driver

42KB

File Name

ao310a3.zip

Observations

Converged Network Adapter for Symmetrix and CLARiiON
Boot for SPARC platforms This version of Open Boot supports FC-AL: Private loop and Public
loop, and Fabric Point to Point. Also, it supports multi-initiators
and multi-LUNs (0 through 4095).
\readme.txt This file you are reading

\SO310a3.PRG Lp7000 Open Firmware 3.10a3
\DO310a3.PRG Lp8000 Open Firmware 3.10a3
\CO310a3.PRG Lp9000 Open Firmware 3.10a3
\HO310a3.PRG Lp9802 Open Firmware 3.10a3
\MO310a3.PRG Lp1050 Open Firmware 3.10a3
\TO310a3.PRG Lp10000 Open Firmware 3.10a3
\BO310a3.PRG Lp11000 Open Firmware 3.10a3
\ZO310a3.PRG Lpe11000 Open Firmware 3.10a3
\UO310a3.PRG LPe12000 Open Firmware 3.10a3
\AO310a3.PRG LP21000 Open Firmware 3.10a3
--------------- NOTES and CAUTIONS ---------------------
** Ensure that critical files on local boot disk are backed up
as a measure of protection.

(1) This procedure assumes there is already a 'local' boot disk.

(2) The size of the intended (target) fibre channel disk should
be big enough to hold all the file systems, and swap slice
of the local current boot disk.

(3) As there will probably be more than one logical disk drive on
the fibre channel adapter it will be necessary to use persistent
binding ('nailing' a specific scsi id to a specific wwpn or did).

(4) It will be necessary to correlate the intended boot disk displayed
by the 'probe-scsi-all' command to the devices displayed by the
operating system.

----------------------------------------------------------------------

----------------------- NEW CHANGES 3.10a3 ------------------------

1. Fixed the issue for the in-correct device id of (LP21000) HBA, and
cause the system fail to initialize the (LP21000) HBA during POST.
(CR75595)
----------------------- NEW CHANGES 3.10a2 ------------------------
1. In some UNIX server, the HBA adapter does not get initialized when DR
is initiated, the cause of the issue is during DR operation, some
Forth word commands from Fcode can't use in HBA's device memory
instead it can only runs under system memory, and that makes the error
message "Segmentation Fault" by the system's Fcode interpreter. This
release fixed the issue by replace different methods for those Forth
word commands to make it compatible with the DR operation. (CR073924)
----------------------- NEW CHANGES 3.10a1 ------------------------

1. Supported multi-Luns from 0 upto 4095, added "set-max-lun" command
to allow user to select the maxmium lun support, the default max lun
is 255. (CR29372)

2. Fixed the issue on fail to update the FC boot target when system
comes up from POST. (CR29373)

3. Fixed the issue for system hangs in scan disk if the link topology
changed after system firmware discovered the bootable lun with
a different topology. (CR29019)

4. Fixed the issue on some system will fail to init the config-port when
option command "set-post-linkup" was enabled. (CR29249)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Universal Boot

Operating System

Boot Code

Version

5.03a5

Size Driver

304KB

File Name

au503a5.zip

Observations

Converged Network Adapter for Symmetrix and CLARiiON
Contains: x86 BootBIOS 2.02a1, OpenBoot 3.10a3 This Universal Boot version 5.03a5 contains:

(1) x86 BootBIOS version 2.02a2
(2) OpenBoot version 3.10a3
(3) EFIBoot version 4.00a5

For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.

Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:

\503a5.txt this file you are reading
\HU503a5.PRG LP9802 Universal Boot
\TU503a5.PRG LP10000 Universal Boot
\BU503a5.PRG LP11000 Universal Boot
\ZU503a5.PRG LPe11000 Universal Boot
\UU503a5.PRG LPe12000 Universal Boot
\AU503a5.PRG LP21000 Universal Boot
\elxcli400a5.efi EFI 4.00a5 Driver
Universal Boot Load Procedure

The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.

1. "Drvcfg" : EFI based Systems.

Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.

2. LP6DUTIL.EXE : DOS based utility.

Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.

3. LPUTILNT : Windows Miniport Driver.

Please refer to the utility user manual for details on using the above tool.

4. Emulex Configuration Tool : Windows Port Driver.

Please refer to the elxcfg user manual for details on using the above tool.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Boot Agent Platform: Ethernet

Operating System

Boot Code

Version

2.0.0.1

Size Driver

304KB

File Name

au503a5.zip

Observations

Converged Network Adapter for Symmetrix and CLARiiON
The Boot Agent prepares the boot ROM of CNA for PXE 2.1 boot and configures Wake On LAN options. It can be uploaded to the flash on the CNA. The Boot Agent can be used to boot a diskless workstation with the supported operating systems, or it can be used to install and set up an operating system on a new computer. This Universal Boot version 5.03a5 contains:

(1) x86 BootBIOS version 2.02a2
(2) OpenBoot version 3.10a3
(3) EFIBoot version 4.00a5

For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.

Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:

\503a5.txt this file you are reading
\HU503a5.PRG LP9802 Universal Boot
\TU503a5.PRG LP10000 Universal Boot
\BU503a5.PRG LP11000 Universal Boot
\ZU503a5.PRG LPe11000 Universal Boot
\UU503a5.PRG LPe12000 Universal Boot
\AU503a5.PRG LP21000 Universal Boot
\elxcli400a5.efi EFI 4.00a5 Driver
Universal Boot Load Procedure

The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.

1. "Drvcfg" : EFI based Systems.

Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.

2. LP6DUTIL.EXE : DOS based utility.

Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.

3. LPUTILNT : Windows Miniport Driver.

Please refer to the utility user manual for details on using the above tool.

4. Emulex Configuration Tool : Windows Port Driver.

Please refer to the elxcfg user manual for details on using the above tool.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

FC Firmware

Operating System

Firmware

Version

1.00a5

Size Driver

228KB

File Name

af100a5.zip

Observations

Converged Network Adapter for Symmetrix and CLARiiON Compatibility:

This kit supports the LP21002 PCIe host adapter.

This kit includes the following files:

README.TXT The file you are reading
AF100A5.ALL All firmware components, no boot code
Changes and Corrections:

-- Version 1.00A5 --

This is the first general release of firmware for this product.
Earlier versions were for prototype builds, pre-release software,
and test purposes.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Linux Offline Utility (requires driver version 8.0.16.44 or later)

Operating System

Linux

Version

1.0a14

Size Driver

2.8MB

File Name

linlpcfg-1.0a14.tgz

Observations

Please note: EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Linux Offline Utility (requires driver version 8.2.0.29 or later)

Operating System

Linux

Version

1.0a11

Size Driver

2.8MB

File Name

linlpcfg-1.0a11.tgz

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Applications Kit

Operating System

Linux 2.6 Kernel

Version

8.2.0.29

Size Driver

179.1MB

File Name

elxlinuxapps-4.0a31-8.2.0.29-1-1.tar

Observations

Red Hat Enterprise Linux 5.2 and Novell SUSE SLES 10 SP2 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware utility 4.0a31 (179 MB tar file)

HBAnyware 4.0a31 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 4.0a31
SSC version 4.0a31
DFC Library version 3.0.25-1-1
HBAAPI version 2.1.g
Multipulse version 3.0.30-1
FCAUTHD version 1.17-1-1
Dependencies:

lpfc driver version 8.2.0.29 or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Driver Kit

Operating System

Linux 2.6 Kernel

Version

8.2.0.29

Size Driver

285KB

File Name

lpfc_2.6_driver_kit-8.2.0.29-1.tar.gz

Observations

Red Hat Enterprise Linux 5.2 and Novell SUSE SLES 10 SP2 (x86 Intel,x86-64 AMD & Intel architectures)
Base driver and install script for RHEL 5.2 (288 KB gz file)

1. System Requirements
1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement
1.2 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
3.2 Deletion of Vports/PCI Hot Unplug
3.2.1 Observed Problem
3.2.2 Background
3.3 lspci utility displays "Unknown Device" for LPe12000 HBAs
3.3.1 Observed Problem
3.3.2 Background
3.4 Speed of LPe12000 HBA (8Gb) is incorrectly displayed by HBAnyware
3.4.1 Observed Problem
3.4.2 Background
3.5 Port disabled on system boot or HBA reset with authentication enabled
3.5.1 Observed Problem
3.5.2 Workaround
3.6 LILO Boot Loader is not supported - i386 and x86_64 architectures
3.6.1 Observed Problem
3.6.2 Background
3.7 Order of lpfc module in initrd module list
3.7.1 Observed Problem
3.7.2 Workaround
3.8 Devloss timeout after swapping ports
3.8.1 Observed Problem
3.8.2 Workaround
3.9 Suspend to disk and Resume support
3.9.1 Observed Problem
3.9.2 Background
3.10 Deleting vports while devices are in use
3.10.1 Observed Problem
3.10.2 Workaround

----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex
LPFC driver:

Red Hat Enterprise Linux 5
SuSE Linux Enterprise Server 10 (SP1 or higher)

1.1 Red Hat Enterprise Linux 'kernel-devel' Package Requirement

For Red Hat Enterprise Linux installations, the -devel package
which matches the kernel package with the same version as the
currently running kernel must be installed for the LPFC driver
build to succeed. For example, a system with the 2.6.18-7 kernel
would need the kernel-devel-2.6.18-7 package.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Driver Kit

Operating System

Linux 2.6 Kernel

Version

8.2.8.14

Size Driver

333KB

File Name

lpfc_2.6_driver_kit-8.2.8.14-1.tar.gz

Observations

SLES 11 (x86 Intel,x86-64 AMD & Intel)
Base driver and install script (333 KB gz file)

1. System Requirements
1.1 SuSE Linux Enterprise Server 'kernel-source' Package Requirement
2. Description of Install Procedure
3. Known Issues
3.1 PCI Hot Plug Support for applications
3.1.1 Observed problem
3.1.2 Workaround
3.2 Deletion of Vports/PCI Hot Unplug
3.2.1 Observed Problem
3.2.2 Background
3.3 Port disabled on system boot or HBA reset with authentication enabled
3.3.1 Observed Problem
3.3.2 Workaround
3.4 LILO Boot Loader is not supported - i386 and x86_64 architectures
3.4.1 Observed Problem
3.4.2 Background
3.5 Order of lpfc module in initrd module list
3.5.1 Observed Problem
3.5.2 Workaround
3.6 Devloss timeout after swapping ports
3.6.1 Observed Problem
3.6.2 Workaround
3.7 Deleting vports while devices are in use
3.7.1 Observed Problem
3.7.2 Workaround
3.8 Support of 4Gb/s HBAs in Direct I/O virtualized environments
3.8.1 Observed Problem
3.8.2 Workaround
----------------------------------------------------------------------

1. System Requirements

The following distributions of Linux are supported by the Emulex
LPFC driver:

SuSE Linux Enterprise Server 11

1.1 SuSE Linux Enterprise Server 'kernel-source' Package Requirement

For SuSE Linux Enterprise Server installations, the kernel-source
package with the same version as the currently running kernel must
be installed for the LPFC driver build to succeed. For example, a
system with the 2.6.27-rc7-12-default kernel would need the
kernel-source-2.6.27-12.1 package.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Applications Kit

Operating System

Linux 2.6 Kernel

Version

8.2.0.48.2p

Size Driver

208.6MB

File Name

elxlinuxapps-4.1a36-8.2.0.48.2p-1-1.tar

Observations

Red Hat Enterprise Linux 5.4 and SUSE SLES 10 SP3 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware utility 4.1a36

HBAnyware 4.1a36 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 4.1a36
SSC version 4.1a36
DFC Library version 3.0.35-1-1
HBAAPI version 2.1.g
FCAUTHD version 1.20-1-1
Multipulse version 3.0.30-1
Dependencies:

lpfc driver version 8.2.0.48.2p or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Applications Kit

Operating System

Linux 2.6 Kernel

Version

8.2.8.14

Size Driver

170.9MB

File Name

elxlinuxapps-4.1a36-8.2.8.14-1-1.tar

Observations

SLES 11 (x86 Intel,x86-64 AMD & Intel)
HBAnyware utility 4.1a26 (170 MB tar file)

HBAnyware 4.1a36 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 4.1a36
SSC version 4.1a36
DFC Library version 3.1.12-1-1
HBAAPI version 2.1.g
FCAUTHD version 2.5-1-1

Dependencies:

lpfc driver version 8.2.8.14 or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware User Manual

Information

Linux 2.6 Kernel

Operating System

Manual

Version

8.2.0.29

Size Driver

5.3MB

File Name

hbanyware.pdf

Observations

Red Hat Enterprise Linux 5.2 and Novell SUSE SLES 10 SP2 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware Release Notes

Information

Linux 2.6 Kernel

Operating System

Manual

Version

8.2.8.14

Size Driver

34KB

File Name

linux_release_notes.pdf

Observations

SLES 11 (x86 Intel,x86-64 AMD & Intel)
New features, fixed issues and known issues in the HBAnyware utility

Release Notes
Date: January 2010
Product: Driver for Linux
Version: FC and FCoE version 8.2.0.63
NIC version 2.101.374.0
iSCSI version 2.101.374.0

New Features in the Driver for Linux
1. Supports the OCe1010x OneConnect Universal Converged Network Adapters (CNAs).
2. Supports the OneCommand Manager application version 5.0. Refer to the OneCommand Manager
application User Manual for more information.
3. Adds PCI ID support for the LPSe12002-ML1-E EmulexSecure Fibre Channel Adapter.
4. Adds support for Advanced Error Reporting (AER) for PCIe HBAs.
Resolved Issues in the Driver for Linux
1. Multipath Package Issues Fixed
Corrected issues with the multipath package functions with the OneConnect UCNA.
2. FCF Failures Addressed
Resolved various FCF failures.
3. Corrected Adapter Reset
Corrected adapter reset and offline/online stress test failing with I/O errors.
4. Multiple Spurious Interrupts Corrected
Required OneConnect UCNA to set up and use single FCP EQ only under INTx interrupt mode. Changed
lpfc_use_msi module parameter to use INTx mode (not MSI) by default. This prevents multiple spurious
interrupts from the firmware.
5. Extended Error Handling Issue Resolved
Blocked all SCSI I/O requests from the midlayer until target rediscovery during Extended Error Handling
EEH.
6. VPort Log Out Issue Corrected
Corrected an issue that prevented a VPort to log out if deleted.
7. mbox sysfs Attribute Corrected
Corrected an issue that resulted in the mbox sysfs attribute smaller than the mailbox extension size.
8. LUN Panic Fixed
Fixed a potential panic if LUNs were unmapped.
9. CPU Lockup Fixed
Resolved an issue that caused the CPU to lock up or hang during boot when authentication is
enabled (fcauthd process is started).
10. Hot Plug Issue Resolved
Fixed a potential system panic issue during PCI Hot Plug.
11. List Corruption Fixed
Corrected an issue that caused a list corruption while unloading the driver.
12. Fabric Login Issue Fixed
Resolved an issue that caused the frame to be zeroed on the wire after a fabric login FLOGI .
13. Advanced Error Reporting Issue Resolved
Added logic to stop and abort all I/Os on an HBA for an advanced error reporting (AER) uncorrectable
non-fatal error handling.
14. AER sysfs entry Point Changed
Made the AER sysfs entry point return "Operation not permitted" for OneConnect UCNAs.
15. Unsolicited CT Exchange Sequences Fixed
Fixed handling of unsolicited CT exchange sequences.
16. Clear Virtual Link Support Added
Added support for Clear Virtual Link command.
17. devloss Timeout Issue Fixed
Corrected a devloss timeout issue when multiple initiators were in the same zone.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware Command Line User Manual

Information

VMware ESX

Operating System

Manual

Version

8.2.0.30.52

Size Driver

888KB

File Name

manual.pdf

Observations

vSphere 4 (ESX 4.0/ESX 4.0 U1, vCenter 4.0) - 2, 4 & 8 Gb/s HBAs and 10 Gb/s CNAs
HBAnyware Command Line Version 4.0

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Driver Release Notes

Information

Linux 2.6 Kernel

Operating System

Manual

Version

8.2.8.14

Size Driver

30KB

File Name

driver_release_notes.pdf

Observations

SUSE Linux Enterprise Server 11 (x86, x64, Intel Itanium2 and PowerPC 64-bit architectures)
New features, fixed issues and known issues in the driver (31 KB)

Release Notes
Date: March 2009 Product: Driver for Linux Version: 8.2.8.14 This document describes the new features, resolved known issues and current known issues associated with this driver build release. For the latest product documentation, go to www.Emulex.com. If you have any questions or require additional information, contact an authorized Emulex Corporation technical support representative.
New Features Driver for Linux 8.2.8.14
1. Supports the LP21000 and LP21002 FCoE adapters. (10 Gb/s capable) 2. Supports the LPe1250, LPe1252, LPe12000 and LPe12002 adapters. (2, 4 and 8 Gb/s capable) 3. Supports the latest HBAnyware utility version 4.1 as part of the master kit. Refer to the HBAnyware Utility User Manual for more information. 4. Supports SuSE Linux Enterprise Server 11. (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures) 5. Adds interfaces via the sysfs file system to update speed and topology parameters without requiring link bounce. 6. Supports Power Management Suspend/Resume operations. 7.
Resolved Issues in Driver for Linux 8.2.8.14
Supports MSI-X interrupt handling.
Known Issues in Driver for Linux 8.2.8.14
There are no resolved issues in this driver version.
1. PCI Hot Plug may cause applications to malfunction Performing a PCI Hot Plug may cause the HBAnyware utilities or third party applications that use the Emulex libraries (i.e. HBAAPI) to behave unpredictably or malfunction. Workaround: 1. Stop all applications that are accessing LPFC's HBAAPI interface (HBAnyware utilities or third party applications) before performing PCI Hot Plug of an LPFC HBA. Use the following command to stop the HBAnyware application: #/usr/sbin/hbanyware/stop_hbanyware 2. Perform the PCI Hot Plug of the HBA. 3. Restart the application.

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Manual

Information

Windows 2003-2008

Operating System

Manual

Version

2.10a7

Size Driver

4.1MB

File Name

win.pdf

Observations

Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Linux User Manual

Information

Linux 2.6 Kernel

Operating System

Manual

Version

8.2.8.14

Size Driver

1.6MB

File Name

manual.pdf

Observations

SUSE Linux Enterprise Server 11 (x86, x64, Intel Itanium2 and PowerPC 64-bit architectures)
Driver for Linux User Manual (1.64 MB pdf file)

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware User Manual

Information

Linux 2.6 Kernel

Operating System

Manual

Version

8.2.0.48.2p

Size Driver

4.6MB

File Name

hbanyware.pdf

Observations

Red Hat Enterprise Linux 5.4 and SUSE SLES 10 SP3 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware Utility Version 4.1 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Offline Utility Manual

Information

Manual

Operating System

Manual

Size Driver

491KB

File Name

manual.pdf

Observations

EMC qualifies operation of the hardware, drivers, firmware and Boot Bios for the products referenced, as documented in the current EMC ESM (EMC Support Matrix). Utility software, including HBAnyware and various stand alone utilities used to manage or maintain Emulex products, are not tested by EMC. Utility software is provided for the convenience of EMC customers. Emulex is responsible for the integrity, functionality and support.
WARNING: You are about to download the EMC Approved HBA driver. This driver is optimized for use with EMC "-E" HBAs. It is being made available to you to update your approved EMC HBAs to support your EMC and non-EMC hardware environments. Downloading this EMC approved driver for use with an unqualified or unsupported HBA may be inconsistent with applicable terms and conditions. If you have any questions about the suitability of downloading this driver, contact your Emulex or EMC sales team.

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware User Manual

Information

Windows 2003-2008

Operating System

Manual

Version

2.10a7

Size Driver

5.3MB

File Name

hbanyware.pdf

Observations

Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

HBAnyware User Manual

Information

VMware ESX

Operating System

Manual

Version

7.4.0.41

Size Driver

5.3MB

File Name

hbanyware.pdf

Observations

Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

DOS Offline Utility

Operating System

MS-DOS

Version

2.0a5

Size Driver

100KB

File Name

doslpcfg_2.0a6.zip

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Applications Kit

Operating System

VMware ESX

Version

7.4.0.41

Size Driver

931KB

File Name

elxvmwarecorekit-esx35-4.0a45-1.i386.rpm

Observations

Virtual Infrastructure 3 v3.5 (ESX 3.5 U4, Virtual Center 2.5) - 10 Gb/s CNAs
The ESX 3.5 U2 lpdf Driver Version 7.4.0.41 is embedded in the VMware release.
HBAnyware 4.0a45 agent, hbacmd, HP Rubah library version 9.0 (932 KB rpm file)

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Driver Kit

Operating System

Windows 2003-2008

Version

2.20.006

Size Driver

37.1MB

File Name

storportminiportkit_2.20.006-1h.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Core Installation Driver Kit

Operating System

Windows 2003-2008

Version

2.10a7

Size Driver

2.8MB

File Name

storportminiportcorekit_2-10a7-1e.exe

Observations

Company

Emulex

Categories

Networks Cards

Serie

Emulex Products Emulex for EMC

Model

Emulex LP21000-C-E

Description

Driver Kit

Operating System

Windows 2003-2008

Version

2.10a7

Size Driver

11.6MB

File Name

storportminiportkit_2-10a7-1e.exe

Observations

Access to Official Website Emulex

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 32 files for Emulex LP21000-C-E

Select Files