Emulex LP9802-E Download Drivers, Utilities, Manual, Firmware and BIOS

Available 51 files for LP9802-E
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
x86 BootBIOS
Operating Systems
Boot Code
Version BIOS
2.02a1
Size BIOS
38Kb
File Name
hb201a2.zip
Information
BootBIOS for x86 platforms and x64 platforms that support legacy BIOS. The adapter boot BIOS provides x86 boot capability through the use of INT13
system BIOS calls. The adapter Boot BIOS supports:

(1) Multi-topology: Fabric Point to Point; FC-AL: Private loop and Public loop
topologies.
(2) Multi-initiators: The adapter BIOS supports up to 32 Emulex LightPulse
adapters in a system.
(3) Multi-LUNs: The adapter BIOS supports up to 256 LUNs.
(4) Multi-boot: The adapter BIOS complies with the BIOS Boot Specification
(BBS).
(5) EDD (Enhanced Disk Drive Services): The adapter BIOS supports both the
EDD 3.0 and EDD 2.1 specifications depending on the selection in the
adapter BIOS configuration utility.
(6) Boot fail over feature: There are eight boot entries that can be
configured in the adapter BIOS configuration utility. If the first boot
entry fails the system is still able to boot from the second configured
boot entry and so on.
\2.01a2.txt this file you are reading

\DB201a2.PRG Lp8000 adapter boot BIOS version 2.01a2
\CB201a2.PRG Lp9000 adapter boot BIOS version 2.01a2
\HB201a2.PRG Lp9802 adapter boot BIOS version 2.01a2
\TB201a2.PRG Lp10000 adapter boot BIOS version 2.01a2
\BB201a2.PRG Lp11000 adapter boot BIOS version 2.01a2
\QB201a2.PRG Lp850 adapter boot BIOS version 2.01a2
\RB201a2.PRG Lp952 adapter boot BIOS version 2.01a2
\LB201a2.PRG Lp982 adapter boot BIOS version 2.01a2
\MB201a2.PRG Lp1050 adapter boot BIOS version 2.01a2
\JB201a2.PRG Lp1150 adapter boot BIOS version 2.01a2
\EB201a2.PRG Lp101 adapter boot BIOS version 2.01a2
\YB201a2.PRG LPe111 adapter boot BIOS version 2.01a2
\WB201a2.PRG LPe1150 adapter boot BIOS version 2.01a2
\ZB201a2.PRG LPe11000 adapter boot BIOS version 2.01a2
\UB201a2.PRG LPe12000 adapter boot BIOS version 2.01a2
\OB201a2.PRG LPe1250 adapter boot BIOS version 2.01a2
\PB201a2.PRG LPe121 adapter boot BIOS version 2.01a2


***** Important Note ******

(1) BIOS downloading

The adapter boot BIOS image has increased in size to 49K. As a result, it might
fail during the downloading of the BIOS .prg file. One way to correct the
problem is to download the firmware .AWC file WITHOUT the BIOS image
(for example: dd390a7.awc) and then download the adapter boot BIOS .prg file.
(2) BIOS was not activated (Enabled)

If the adapter boot BIOS is not enabled by LP6DUTIL or an Emulex O.S.
configuration utility, the adapter and the drives connected to the adapter
cannot not be configured to be used to boot the system. In addition if there is
a "No BIOS support" message displayed next to this adapter in the adapter BIOS
configuration utility the user must use LP6DUTIL or other Emulex O.S.
configuration utility to enable the adapter boot BIOS in order to allow this adapter
to be used a bootable controller by the host system.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
EFIBoot
Operating Systems
Boot Code
Version Driver
4.00a1
Size Driver
219Kb
File Name
he400a1.zip
Information
EFIBoot for IA64 platforms and
x64 platforms that support EFIBoot. The current EFI (Extensible Firmware Interface) Boot provides 64-bit system
boot capability through the use of the EFI Shell. EFIBoot supports EFI
Specification 1.10 and EFI Source Code version 1.10.14.61 and 1.10.14.62.

EFIBoot supports:

(1) Multi-Topology : Fabric Point-to-Point; FC-AL: Private Loop and Public
Loop.

(2) EFI Protocols : Configuration, Component Name, Firmware Update, VPD,
LunCtrlAttrs and Diagnostics are supported.

(3) Operating System : Windows Server 2003 and Red-Hat Linux

(4) Multi-Device path : Fibre/SCSI device path selectable through the Driver
Configuration Protocol.

(5) Multi-Initiators : Up to 128 adapters in a system.

(6) Multi-Boot : Eight targets/controller selectable through the Driver
configuration Protocol.

(7) Multi-LUNs : Up to 4096 LUNs/target for a volume set device.
Up to 256 LUNs/target for a peripheral device.

(8) Multi-Mode : Peripheral and Volume Set devices are supported.

(9) Multi-Utility : Setup and firmware update are supported.
Files included in this release:

EFI Byte Code Driver Images:

\rel_notes.txt this file you are reading
\HE400A1.PRG Lp9802 EFIBoot version 4.00A1
\LE400A1.PRG Lp982 EFIBoot version 4.00A1
\TE400A1.PRG Lp10000 EFIBoot version 4.00A1
\ME400A1.PRG Lp1050 EFIBoot version 4.00A1
\EE400A1.PRG Lp101 EFIBoot version 4.00A1
\BE400A1.PRG Lp11000 EFIBoot version 4.00A1
\JE400A1.PRG Lp1150 EFIBoot version 4.00A1
\ZE400A1.PRG Lpe11000 EFIBoot version 4.00A1
\WE400A1.PRG Lpe1150 EFIBoot version 4.00A1
\YE400A1.PRG Lpe111 EFIBoot version 4.00A1
\UE400A1.PRG Lpe12000 EFIBoot version 4.00A1
\OE400A1.PRG Lpe1250 EFIBoot version 4.00A1
\ElxCli400A1.efi

***** Important Note ******

(1) EFIBoot was not enabled from loading to system memory:

If the adapter EFIBoot is not enabled from loading to system, this adapter
will not be configured. User must use LP6dutil or some other OS Utility to
enable the EFIBoot in order to make this card bootable.

(2) EFIBoot Bios was enabled to configure the adapter and No Link:

EFIBoot will wait for 15 seconds/adapter to confirm a link.

(3) If two or more adapters have same EFIBoot driver version, EFIBoot will
load only one driver.

(4) If there are adapters with different EFIBoot driver versions, EFIBoot
will load the highest version of the EFIBoot driver.

(5) In order to display Linkup speed, use the latest version of the firmware.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Pair Boot
Operating Systems
Boot Code
Version Driver
5.03a2
Size Driver
301Kb
File Name
hu503a2.zip
Information
Contains: x86 BootBIOS 2.01a2 and EFIBoot 4.00a1 This Universal Boot version 5.03a2 contains:

(1) x86 BootBIOS version 2.02a1
(2) OpenBoot version 3.01a1
(3) EFIBoot version 4.00a1

For detailed information about x86 BootBIOS, please refer to section II below,
for OpenBoot, section III, and for EFIBoot, section IV. This Universal Boot can
boot on either Intel x86 Platform, Non-Intel Fcode, or EFI environment. In other
words, the platform is transparent and the user should not be concerned with any
differences with regard to x86 BootBIOS, OpenBoot, or EFIBoot.

Universal Boot is a complete image, whenever it is enabled by any Emulex OS
utility, the whole image (x86 BootBIOS, OpenBoot and EFIBoot) is enabled. This
is also true for disable.
Files included in this release:

\503a2.txt this file you are reading
\HU503a2.PRG LP9802 Universal Boot
\TU503a2.PRG LP10000 Universal Boot
\BU503a2.PRG LP11000 Universal Boot
\ZU503a2.PRG LPe11000 Universal Boot
\UU503a2.PRG LPe12000 Universal Boot
\elxcli400a1.efi EFI 4.00a1 Driver
Universal Boot Load Procedure

The Light Pulse Universal Boot is distributed as a .PRG file. This file may be
downloaded to the Adapter using the firmware upgrade procedure with the following
Utility in Various systems.

1. "Drvcfg" : EFI based Systems.

Please refer to section 4 in EFIBoot for user interface how to download
Universal Boot in EFI based systems.

2. LP6DUTIL.EXE : DOS based utility.

Please refer to the LP6DUTIL version 9.0a13, or later, documentation for user
interface how to download EFIBoot in DOS PCI systems.

3. LPUTILNT : Windows Miniport Driver.

Please refer to the utility user manual for details on using the above tool.

4. Emulex Configuration Tool : Windows Port Driver.

Please refer to the elxcfg user manual for details on using the above tool.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Firmware
Operating Systems
Firmware
Version Firmware
1.92a1
Size Firmware
337Kb
File Name
hd192a1.zip
Information
Support Resources for Symmetrix, CLARiiON and AX Series Compatibility:

This kit supports the LP9802 PCI host adapter.

This kit includes the following files:

README.TXT The file you are reading

HD192A1.ALL All firmware components, no boot

LP6DUTIL.EXE DOS-based diagnostic utility 9.3a6
LP6DUTIL.DOC LP6DUTIL diagnostic utility document
SAMPLESCRIPT.TXT An example script for LP6DUTIL 9.3a6
Changes and Corrections:

-- Changes and corrections between 1.92a1 and 1.91a5:

Implemeted beaconing feature for Pegasus and Thor. (CR 16592, 21846)

The R_A_TOV field is now properly expressed in milliseconds. (CR 22640)

Improved target mode "fast" POST so that power up no longer causes HBA
to hang. (CR 22594)

A timeout is prevented by allowing the firmware to process fatal DMA
engine errors even if the DMA is not complete, such as during a PCI
master abort. (CR 22641)

Various concurrent FLASH programming issues were resolved by improving
the FLASH interlocking/unlocking algorithm, implementing Intel errata,
and implementing erase failure recovery code.
(CR 21885, 21888, 21889, 21890)

We now default to allowing the PCI bridge to reorder data frames as
necessary, which may result in a system performance increase for some
systems. (CR 21867)

Improved FCP2 recovery to avoid the dropping of frames
(and the resulting delays) during REC ELS command. (CR 21865)

Fixed a recovery issue where a corrupted REC frame with a mismatching
offset would cause the HBA to loop, continually requesting recovery.
(CR 21864)

To avoid dropped receive frames in the case where an OXID is reused
for a new exchange during the ABTS/RRQ processing window, we now skip
any matching "new" exchanges which are in the RRQ state. (CR 21855)

Improved management of unavailable memory by limiting the number of
retries. The HBA now reports an error attention after retries have
been exhausted. (CR 21854)

Improved DMA error handling of split errors where host memory has been
made unavailable. (CR 21853)

Commands are now timed out properly when in FCP-2 mode. (CR 21852)

Protocol testing with invalid conditions revealed protocol response
errors which have had no reported instances of failure in the field.
(CR 21850, 21851, 21863)

An I/O timeout during tape operation was eliminated by delaying
processing of any FCP2 errors during discovery. (CR 17363)

Thor no longer deadlocks during processing of RRQ when RESET_RING is
issued with no available exchange resources. (CR 20064)

Improved operation of Pegasus Rx DMA firmware on PCI-X bus.
(CR 21542)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Linux Offline Utility
Operating Systems
Linux
Version Utilities
1.0a11
Size Utilities
2.8Mb
File Name
linlpcfg-1.0a11.tgz
Information
version 1.0a11 (requires driver version 8.2.0.29 or later)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Linux Offline Utility
Operating Systems
Linux
Version Utilities
1.0a14
Size Utilities
2.8Mb
File Name
linlpcfg-1.0a14.tgz
Information
version 1.0a14 (requires driver version 8.0.16.44 or later)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Applications Kit
Operating Systems
Linux 2.6 Kernel
Version Driver
8.2.0.48.2p
Size Driver
208.6Mb
File Name
elxlinuxapps-4.1a36-8.2.0.39-1-1.tar
Information
Red Hat Enterprise Linux 5.3, SUSE SLES 11 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware utility 4.1a36 (208 MB tar file)

HBAnyware 4.1a36 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 4.1a36
SSC version 4.1a36
DFC Library version 3.0.35-1-1
HBAAPI version 2.1.g
FCAUTHD version 1.20-1-1
Multipulse version 3.0.30-1
Dependencies:

lpfc driver version 8.2.0.39 or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Linux User Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.48.2p
Size Manual
1Mb
File Name
linux8x.pdf
Information
Red Hat Enterprise Linux 5.3, SUSE SLES 11 (x86 Intel,x86-64 AMD & Intel architectures)
Driver for Linux User Manual (1.53 MB pdf file) Chapter 1 Introduction
Purpose of this document................................................................ 12
Host connectivity .............................................................................. 12
Fibre Channel ..............................................................................12
Fibre Channel over Ethernet .....................................................12
EMC storage array-specific settings............................................... 13
Boot device support.......................................................................... 13
Zoning ................................................................................................ 14
Useful Linux utilities and functions............................................... 14
Chapter 2 Installation Steps
Prerequisites for first-time installation .......................................... 16
Summary of installation steps......................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .....................22
Chapter 3 Installing and Configuring the BIOS Settings
Verifying and updating the Emulex boot BIOS............................ 28
Verifying the correct BIOS version...........................................28
Updating the boot BIOS.............................................................29
Method One Updating the adapter boot BIOS with
hbacmd............................................................................................... 30
Method Two Booting from a DOS bootable diskette and
using the lp6dutil utility .................................................................. 33
Chapter 4 Installing and Configuring the Driver
Installation instructions for the Emulex v8.x-series driver......... 36
Downloading the Emulex v8.x-series adapter driver for
the v2.6.x kernel .......................................................................... 37
Installing the Emulex CNA v8.x-series driver on RHEL
5.2 and SLES 10 SP2 hosts ......................................................... 38
Installing the Emulex v8.x-series driver on SLES 9 SP1
hosts.............................................................................................. 39
Installing the Emulex v8.x-series driver on RHEL 4
hosts.............................................................................................. 42
Included Emulex driver on RHEL 4, RHEL 5, OEL 4,
OEL 5, Asianux 2.0, Asianux 3.0, SLES 9, and SLES 10 ........ 45
Uninstalling the Emulex v8.x-series driver................................... 47
Installing the Emulex HBAnywhere applications kit.................. 48
Editing the configuration files ........................................................ 51
Description of the Emulex lpfc driver parameters ................ 51
Descriptions of the Emulex parameters .................................. 52
Editing the Emulex driver parameters on hosts with
SLES 9 and SLES 10 .................................................................... 54
Editing the Emulex driver parameters on hosts with
RHEL 4 and RHEL 5 .................................................................. 55
Editing the Emulex driver parameters on hosts with
Asianux 2.0 and Asianux 3.0..................................................... 56
Editing the Emulex driver parameters on hosts with
OEL 4 and OEL 5 ........................................................................ 57
Exercising the Emulex v8.x-series device driver.......................... 58
Loading and unloading the Emulex v8.x-series driver......... 58
Target information exported to the /proc filesystem ........... 59
Dynamically modifying the driver and device
information exported to the /sys filesystem.......................... 59
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
HBAnyware User Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.48.2p
Size Manual
4.6Mb
File Name
hbanyware.pdf
Information
Red Hat Enterprise Linux 5.3, SUSE SLES 11 (x86 Intel,x86-64 AMD & Intel architectures)
HBAnyware Utility Version 4.1

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Applications Kit
Operating Systems
Linux 2.6 Kernel
Version Driver
8.2.0.48.2p
Size Driver
196.4Mb
File Name
elxlinuxapps-3.4a14-8.0.16.40-2-1.tar
Information
RHEL 4.7 and SLES 9 SP4 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
HBAnyware utility 3.4a14, Application helper module 2.0.30

HBAnyware 3.4a14 Linux Installation Instructions

This installation kit contains the following components:

HBAnyware version 3.4a14
SSC version 3.4a14
DFC Library version 80.164-8
Lputil version
HBAAPI version 2.1.g

Dependencies:

lpfc driver version 8.0.16.40 or later

HBAnyware requires that the lpfc driver module be installed.

HBAnyware requires a minimum screen resolution of 1024 x 768.
Installing HBAnyware:

1. Copy the applications kit tar file to a directory on the install machine
2. cd to the directory which you copied the tar file
3. Untar the file: tar -xvf tarfilename
4. cd (change directory) to the "ElxLinuxApps.." directory created by step 3
5. su to root
6. If earlier HBAnyware version currently installed, type : ./uninstall
7. Run the install script: ./install
8. When prompted, answer the following question:

Select desired mode of operation for HBAnyware

1 Local Mode : HBA's on this Platform can be managed by HBAnyware
clients on this platform only.
2 Managed Mode : HBA's on this Platform can be managed by local or
remote HBAnyware clients
3 Remote Mode : Same as '2' plus HBAnyware clients on this Platform
can manage local and remote clients.

Enter the number '1' or '2' or '3'
9. When prompted, answer the following question:

Do you want to allow user to make subsequent management mode changes
using 'set_operating_mode' script
Enter the letter 'Y' for yes or 'N' for no

10. Installation Complete: type /usr/sbin/hbanyware/hbanyware
to start GUI or type /usr/sbin/hbanyware/hbacmd list
to run script utility
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Linux User Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.48.2p
Size Manual
1Mb
File Name
linux8x.pdf
Information
RHEL 4.7 and SLES 9 SP4 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
Driver for Linux User Manual (1.53 MB pdf file) Chapter 1 Introduction
Purpose of this document................................................................ 12
Host connectivity .............................................................................. 12
Fibre Channel ..............................................................................12
Fibre Channel over Ethernet .....................................................12
EMC storage array-specific settings............................................... 13
Boot device support.......................................................................... 13
Zoning ................................................................................................ 14
Useful Linux utilities and functions............................................... 14
Chapter 2 Installation Steps
Prerequisites for first-time installation .......................................... 16
Summary of installation steps......................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .....................22
Chapter 3 Installing and Configuring the BIOS Settings
Verifying and updating the Emulex boot BIOS............................ 28
Verifying the correct BIOS version...........................................28
Updating the boot BIOS.............................................................29
Method One Updating the adapter boot BIOS with
hbacmd............................................................................................... 30
Method Two Booting from a DOS bootable diskette and
using the lp6dutil utility .................................................................. 33
Chapter 4 Installing and Configuring the Driver
Installation instructions for the Emulex v8.x-series driver......... 36
Downloading the Emulex v8.x-series adapter driver for
the v2.6.x kernel .......................................................................... 37
Installing the Emulex CNA v8.x-series driver on RHEL
5.2 and SLES 10 SP2 hosts ......................................................... 38
Installing the Emulex v8.x-series driver on SLES 9 SP1
hosts.............................................................................................. 39
Installing the Emulex v8.x-series driver on RHEL 4
hosts.............................................................................................. 42
Included Emulex driver on RHEL 4, RHEL 5, OEL 4,
OEL 5, Asianux 2.0, Asianux 3.0, SLES 9, and SLES 10 ........ 45
Uninstalling the Emulex v8.x-series driver................................... 47
Installing the Emulex HBAnywhere applications kit.................. 48
Editing the configuration files ........................................................ 51
Description of the Emulex lpfc driver parameters ................ 51
Descriptions of the Emulex parameters .................................. 52
Editing the Emulex driver parameters on hosts with
SLES 9 and SLES 10 .................................................................... 54
Editing the Emulex driver parameters on hosts with
RHEL 4 and RHEL 5 .................................................................. 55
Editing the Emulex driver parameters on hosts with
Asianux 2.0 and Asianux 3.0..................................................... 56
Editing the Emulex driver parameters on hosts with
OEL 4 and OEL 5 ........................................................................ 57
Exercising the Emulex v8.x-series device driver.......................... 58
Loading and unloading the Emulex v8.x-series driver......... 58
Target information exported to the /proc filesystem ........... 59
Dynamically modifying the driver and device
information exported to the /sys filesystem.......................... 59
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
HBAnyware User Manual
Operating Systems
Linux 2.6 Kernel
Version Manual
8.2.0.48.2p
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
RHEL 4.7 and SLES 9 SP4 (Intel x86, Intel Itanium2, Intel EM64T, AMD64, and PowerPC 64-bit architectures)
Note Requires driver update to the kernel. : Driver is in the kernel 2.6.5-7.311 and greater; and available from both Novell and Emulex as a driver update for kernel 2.6.5-7.308.
HBAnyware Utility Version 4.0 Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Viewing Host Information .......................................................................... 21
The Host Information Tab.................................................................... 21
The Driver Parameters Tab................................................................. 22
Viewing General HBA Attributes ............................................................... 23
Viewing Detailed HBA Information ............................................................ 24
Viewing Fabric Information........................................................................ 26
Viewing Target Information........................................................................ 27
Viewing LUN Information........................................................................... 28
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 29
Viewing Port Statistics............................................................................... 31
Viewing Firmware Information ................................................................... 33
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 34
Viewing Target Mapping (Linux) ................................................................ 35
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Offline Utility Manual
Operating Systems
Manual
Size Manual
491Kb
File Name
manual.pdf
Information
version 1.0a14 (requires driver version 8.0.16.44 or later)

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
DOS Offline Utility
Operating Systems
MS-DOS
Version Utilities
2.0a5
Size Utilities
100Kb
File Name
doslpcfg_2.0a6.zip
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Library and Utilities Kit 2.1a38
Operating Systems
VMware ESX 3.02-3.0.1-3.0
Size Utilities
278Kb
File Name
elxvmwarecorekit-2.1a38-1.i386.rpm
Information
ESX 3.02, ESX 3.0.1, ESX 3.0. lpfc Driver 7.3.2_vmw (All) is embedded in the VMware releases
HBAnyware 2.1a38 agent, hbacmd (278 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Library and Utilities Kit 2.1a38
Operating Systems
VMware ESX 3.5 U1-3.5.2
Size Utilities
278Kb
File Name
elxvmwarecorekit-2.1a38-1.i386.rpm
Information
ESX 3.5 U1; ESX 3.5.2 - lpfc Driver 7.4.0.13 is embedded in the VMware release
HBAnyware 2.1a38 agent, hbacmd (278 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Library and Utilities Kit 2.1a40
Operating Systems
VMware ESX 3.5 U2
Size Utilities
300Kb
File Name
elxvmwarecorekit-2.1a40-1.i386.rpm
Information
ESX 3.5 U2 lpfc Driver 7.4.0.13-2 is embedded in the VMware release.
HBAnyware 2.1a40 agent, hbacmd (278 KB rpm file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Emulex ESX Driver Version 7.4.x User Manual
Operating Systems
VMware ESX 3.5 U2
Size Manual
1016Kb
File Name
vmware.pdf
Information
ESX 3.5 U2 lpfc Driver 7.4.0.13-2 is embedded in the VMware release.
(1 MB pdf file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
HBAnyware User Manual
Operating Systems
VMware ESX 3.5 U2
Size Manual
3.9Mb
File Name
hbanyware34_preliminary.pdf
Information
ESX 3.5 U2 lpfc Driver 7.4.0.13-2 is embedded in the VMware release.
HBAnyware Utility User Manual

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 2
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 9
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................. 10
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Changing HBA Names .................................................................................... 15
Discovering HBAs ........................................................................................... 16
Automatic Fibre Channel Discovery .......................................................... 16
Remote SAN Management Using TCP/IP Access Protocol....................... 16
Adding a Single Host .......................................................................... 17
Adding a Range of Hosts .................................................................... 18
Removing Hosts.................................................................................. 19
Configuring Discovery Settings ................................................................. 19
Sorting HBA Information.................................................................................. 20
Viewing Remote and Local HBAs.............................................................. 20
Viewing HBA Information................................................................................. 21
Viewing Discovery Information .................................................................. 21
Viewing Host Information .......................................................................... 22
The Host Information Tab.................................................................... 22
The Driver Parameters Tab................................................................. 23
Viewing General HBA Attributes ............................................................... 24
Viewing Detailed HBA Information ............................................................ 26
Viewing Fabric Information........................................................................ 28
Viewing Target Information........................................................................ 29
Viewing LUN Information........................................................................... 30
Masking and Unmasking LUNs (Windows, Solaris LPFC and
Solaris SFS)........................................................................................ 31
Viewing Port Statistics............................................................................... 33
Viewing Firmware Information ................................................................... 35
Viewing Target Mapping (Windows, Solaris LPFC and Solaris SFS)......... 36
Viewing Target Mapping (Linux) ................................................................ 37
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2000
Version Driver
2.42a0
Size Driver
13.8Mb
File Name
emcfcportkit_2-42a0-1c.exe
Information
Microsoft WHQL Qualified for Windows 2000 Server
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2000
Version Manual
2.42a0
Size Manual
4.1Mb
File Name
win.pdf
Information
Microsoft WHQL Qualified for Windows 2000 Server
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2000
Version Driver
2.41a1
Size Driver
13.8Mb
File Name
emcfcportkit_2-41a1-1b.exe
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server
Base driver, HBAnyware utility 2.1a21 and elxcfg version 1.41a17 (14 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2000
Version Manual
2.41a1
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2000-2003
Version Driver
1.11a0 x86, IA64 and x64
Size Driver
15Mb
File Name
storportminiportkit_1-11a0-1c.exe
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and lputilnt version 1.8a15 (15 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Legacy Install Kit x86
Operating Systems
Windows 2000-2003
Version Driver
1.11a0 x86, IA64 and x64
Size Driver
12.6Mb
File Name
storport-5-1.11a0-1e.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17

This kit contains the following components:

elxstorinstall5111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Legacy Install Kit IA64
Operating Systems
Windows 2000-2003
Version Driver
1.11a0 x86, IA64 and x64
Size Driver
12.9Mb
File Name
storport-6-1.11a0-1c.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17

This kit contains the following components:

elxstorinstall6111a0dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Legacy Install Kit x64
Operating Systems
Windows 2000-2003
Version Driver
1.11a0 x86, IA64 and x64
Size Driver
12.6Mb
File Name
storport-7-1.11a0-1e.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a17 and elxcfg version 1.41a17

This kit contains the following components:

elxstorinstall7111a0c.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a17-1b.zip - Emulex Applications Kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
1.11a0 x86, IA64 and x64
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver
Operating Systems
Windows 2000-2003
Version Driver
1.03a9 x86, IA64 and x64
Size Driver
11.2Mb
File Name
storport-5-1.03a9-1d.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.1a9 and lputilnt version 1.8a2

This kit contains the following components:

elxstorinstall5103a9dc.zip - Emulex Fibre Channel Storport Miniport Driver
EmlxApps21a9-1b.zip - Emulex Applications Kit
readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
relnotes.doc file included in the Emulex Driver Kit listed above.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.pdf file contained in the Emulex
Applications Kit listed above.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
1.03a9 x86, IA64 and x64
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver 64-bit
Operating Systems
Windows 2000-2003
Version Driver
1.02a3
Size Driver
6.7Mb
File Name
storport-6-1.02a3-2b.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16

This kit contains the following components:

elxstorinstall6102a3dc.zip - Emulex Fibre Channel StorPort Miniport Driver
Emlx64Apps300a5.zip - Emulex Applications kit
Readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall6102a3dc.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
Emlx64Apps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver 32-bit
Operating Systems
Windows 2000-2003
Version Driver
1.02a3
Size Driver
5.6Mb
File Name
storport-5-1.02a3-1b.zip
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Base driver, HBAnyware utility 2.0a13 and lputil64 version 1.7a16

This kit contains the following components:

elxstorinstall5102a3c.zip - Emulex Fibre Channel StorPort Miniport Driver
EmlxApps300a5.zip - Emulex Applications kit
Readme.first.txt - this file

The detailed contents for each of these components can be found in
the readme files included in each individual kit. The specific minimum
system requirements for each of these kits can be found in the same files.

It is important that the components of this kit be installed in the
appropriate order:

1) The driver kit must be installed first, followed by the applications
kit. Instructions for installing the driver kit can be found in the
readme.txt file included in the elxstorinstall5102a3c.zip package.

2) Once the driver has been successfully installed, then the applications
kit must be installed. Instructions for installing the applications
kit can be found in the readme.doc file contained in the
EmlxApps300a5.zip package.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2000-2003
Version Manual
1.02a3
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified for Windows 2000 Server and 32-bit Windows Server 2003
Note This driver requires hot fix Q903081 for SP1 and non-SP1 Windows 2003 configurations including x86, x64, and IA64.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver Kit
Operating Systems
Windows 2003
Version Driver
2.01a4
Size Driver
8.8Mb
File Name
storportminiportkit_2-01a4-1g.exe
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Driver 2.01a4 can be used to new install new Boot from SAN configurations with SP2. After the installation completes and the system reboots, install STORPort hotfix Q943545. The HBAnyware management application can be installed with the full Storport Miniport kit or by manually installing the Emulex PLUS driver and the driver utilities package.
Driver 2.01a4 cannot be used to directly install new Boot from SAN configurations with SP1. With SP1, new Boot from SAN configurations require the initial installation to be done with driver 1.30a9. Once the OS is installed, then upgrade to SP2 and STORPort hotfix Q943545 before upgrading to driver 2.01a4.
Base driver, HBAnyware utility 3.4a9 (9.21 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003
Version Manual
2.01a4
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: The Storport Miniport driver is WHQL qualified for the Microsoft "Designed for Windows" logo program and digitally signed for x86, Itanium and x64 Editions versions of Windows Server 2003 and Windows Server 2003 Datacenter Edition.
Note Windows Server 2003 SP1 or SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver version 2.01a4 can be installed.
Driver 2.01a4 can be used to new install new Boot from SAN configurations with SP2. After the installation completes and the system reboots, install STORPort hotfix Q943545. The HBAnyware management application can be installed with the full Storport Miniport kit or by manually installing the Emulex PLUS driver and the driver utilities package.
Driver 2.01a4 cannot be used to directly install new Boot from SAN configurations with SP1. With SP1, new Boot from SAN configurations require the initial installation to be done with driver 1.30a9. Once the OS is installed, then upgrade to SP2 and STORPort hotfix Q943545 before upgrading to driver 2.01a4.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2003
Version Driver
1.30a9
Size Driver
24.2Mb
File Name
emcstorportminiportkit_1-30a9-1e.exe
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix KB943545 is required.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.30a9
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix KB943545 is required.
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2003
Version Driver
1.30a6
Size Driver
24Mb
File Name
emcstorportminiportkit_1-30a6-1b.exe
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.1a8 and lputilnt version 1.8a18 (24.6 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.30a6
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2003
Version Driver
1.20a3
Size Driver
19Mb
File Name
storportminiportkit_1-20a3-1h.exe
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 3.0 (19.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.20a3
Size Manual
3.7Mb
File Name
manual.pdf
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting

Installation ...............................................................................................1
Driver Information .................................................................................................... 1
Supported Features........................................................................................... 1
New Features in this Release............................................................................ 1
Prerequisites ..................................................................................................... 2
For the lpfc Driver Kit .................................................................................. 2
Compatibility...................................................................................................... 2
Things to Know Before You Download .............................................................. 3
Known Issues .................................................................................................... 3
Installing the Driver Kit ............................................................................................ 3
Driver Kit Install Script Options.......................................................................... 4
Driver Kit Directory Structure ............................................................................. 4
Installing the Driver on Unsupported Linux Distributions.......................................... 5
Upgrading the Kernel or Applying a Distribution Service Pack or Update ................ 5
Installing the Driver Kit into an Upgraded Kernel ............................................... 5
Booting From a Non-Zero LUN Attached to an Emulex Adapter .............................. 6
Installing the HBAnyware Utility ............................................................................... 6
Uninstalling the Driver Kit .................................................................................. 7
Configuration ..........................................................................................8
Driver Configuration Methods Using modprobe and
/etc/modprobe.conf............................................................................................ 8
Temporary Configuration Method ................................................................ 8
Persistent Configuration Method ................................................................. 8
Temporary Driver Configuration by Read/Write to sysfs .................................... 9
Creating a New Ramdisk Image ...................................................................... 10
For Installed lpfc Driver Kits ...................................................................... 10
For Distribution In-Box lpfc Drivers............................................................ 10
Dynamically Adding LUNs and Targets............................................................ 10
Driver Parameters Reference Table ................................................................ 11
Using udev for Persistent Naming ................................................................... 15
Using udev to Discover Logical to Physical Mappings for sd Devices ....... 15
Configuring the System to Boot From SAN Using Persistent Names ........ 15
Using udev with st Devices ....................................................................... 16
Further Information About Persistent Names ............................................ 17
Working with Virtual Ports (vports)......................................................................... 18
Creating, Deleting and Displaying vports......................................................... 18
The mkvport.sh Script ............................................................................... 18
The rmvport.sh Script................................................................................ 19
The lsvport.sh Script ................................................................................. 19
The vport Sysfs Tree ....................................................................................... 19
Driver Version 8.2.8.14 sysfs Structure............................................................ 20
Vport sysfs Entries .................................................................................... 21
Vport Configuration Limits ............................................................................... 23
DHCHAP Authentication and Configuration ........................................................... 24
Authentication Configuration Parameters ........................................................ 25
Setting Remote and Local Passwords ............................................................. 25
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
AutoPilot Install Kit
Operating Systems
Windows 2003
Version Driver
1.11a3
Size Driver
15.1Mb
File Name
storportminiportkit_1-11a3-1b.exe
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Base driver, HBAnyware utility 2.1a21 and lputilnt version 1.8a18 (15.5 MB exe file)
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003
Version Manual
1.11a3
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft WHQL Qualified 32-bit Windows Server 2003, 64-bit Windows Server 2003 and Windows Server 2003 x64 Edition.
Note For Windows 2003 configurations running STORPort drivers Microsoft STORPort hotfix Q916048 is required.
Refer to EMC Knowledgebase ID emc135768 for further information.
Installation, Configuration and Troubleshooting (2,918 KB) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.20.006
Size Driver
37.1Mb
File Name
storportminiportkit_2.20.006-1h.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
Base driver, HBAnyware utility 4.1a35 (34.7 MB exe file) For Windows 2008 and Windows 2003. This kit supports the standard Microsoft Windows releases and should be used except for use with Microsoft Windows Core Server
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver Release Notes
Operating Systems
Windows 2003-2008
Version Driver
2.20.006
Size Driver
26Kb
File Name
driver_release_notes_b.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
New features, fixed issues and known issues in the driver

New Features in Version 2.20.006
1. Added ExtTransferSize parameter. This parameter improves performance on tape devices supporting a larger block size.
2. Added support for Windows Server 2008 R2. This version of the driver kit adds support for Windows Server 2008 R2.
Resolved Issues in Version 2.20.006
1. There was the potential for the driver and the HBA to not synchronize properly, after the HBA was in warm start mode. Polling was modified in the HBAnyware utility.
2. The internal and external loopback diagnostic tests were not available for LP21000 and LP21002 adapters.
Known Issues in Version 2.20.006
1. The HBAnyware GUI is not available on the IA64 architecture. If you are installing on an IA64 system use the HBACMD command line utility, which is available in the Storport Miniport driver and core (CLI) application kit, instead of the Storport Miniport driver and HBAnyware kit.
Workaround: There is no workaround at this time.
2. Do not perform software-first installations on Windows Server 2008 or Vista systems. The procedure documented in the driver user manual might not have the expected effect. No error will be reported, but Windows might continue using the version of the driver distributed with the operating system rather than the new driver when an adapter is installed. The problem occurs because Microsoft-distributed drivers are versioned differently than Emulex- distributed drivers.
Workaround: There is no workaround at this time.
3. To revert to an older driver after a newer driver has been installed, you must uninstall all Emulex software and drivers before installing the older driver kit. Failure to do so could leave your system in an unsupported state. See the driver user manual for all the procedures you must follow.
Workaround: There is no workaround at this time.
4. Due to an issue with HBAnyware version 4.1, the default global driver parameters for converged network adapters (CNAs) cannot be changed.
Workaround: There is no workaround at this time.
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003-2008
Version Manual
2.20.006
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
HBAnyware User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.20.006
Size Manual
4.6Mb
File Name
hbanyware.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note For Windows Server 2003, SP2 and Hotfix Q957910 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008, SP2 and Hotfix Q968675 update to the Microsoft STORPort driver are required. The STORPort KB update must be applied before the Emulex STORPort Miniport driver can be installed.
For Windows Server 2008 R2, no Hotfix is required
HBAnyware Utility Version 4.1

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Core Installation Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.10a7
Size Driver
2.8Mb
File Name
storportminiportcorekit_2-10a7-1e.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note >Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 CLI (2.82 MB exe file) For Windows 2008 use with Microsoft Windows Core Server, where no GUIs are available during installation. This kit differs from the standard driver kit. HBAnyware includes command line support only. The Windows Core kit today is used for operation under Microsoft HyperV
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Driver Kit
Operating Systems
Windows 2003-2008
Version Driver
2.10a7
Size Driver
11.6Mb
File Name
storportminiportkit_2-10a7-1e.exe
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note >Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Base driver, HBAnyware utility 4.0a32 (11.6 MB exe file) For Windows 2008 and Windows 2003. This kit supports the standard Microsoft Windows releases and should be used except for use with Microsoft Windows Core Server
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
Manual
Operating Systems
Windows 2003-2008
Version Manual
2.10a7
Size Manual
4.1Mb
File Name
win.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note >Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
Installation, Configuration and Troubleshooting (2,918 KB pdf file) Chapter 1 Installation and Configuration
How this guide works...................................................................... 18
Downloading latest Emulex drivers/firmware/BIOS
files ............................................................................................... 18
Installing the adapter ....................................................................... 20
Matching the adapter with the correct PCI slot .................... 22
Fibre Channel over Ethernet (FCoE) .............................................. 27
Booting from the external storage array........................................ 28
Updating the flash firmware/BIOS ........................................ 28
Emulex LightPulse-based Fibre Channel adapter
BIOS/boot LUN settings .......................................................... 36
Installing a RAMDISK under the EFI shell ............................ 76
Installing Windows on an external SAN disk using an EFI
RAMDISK .......................................................................................... 77
Windows 2000/2003 external boot disk installation ............ 77
Windows 2008 internal/external boot disk installation ...... 84
Windows 2008 Server Core operating system option.................. 94
Limitations.................................................................................. 95
EMC support .............................................................................. 95
Installing adapter driver and software utilities............................ 97
Pre-installation guidelines........................................................ 97
Installing or upgrading the driver and utilities .................... 98
Updating the adapter firmware using the HBAnyware
utility ......................................................................................... 107
Adapter BIOS upgrade................................................................... 111
Fibre Channel over Ethernet (FCoE) Converged Network
Adapter (CNA) procedures........................................................... 115
Overview .................................................................................. 115
Installing Fibre Channel firmware on an Emulex CNA.... 118
Installing Menlo firmware on an Emulex CNA.................. 124
Installing or upgrading the driver and utilities on an
Emulex OCe10102-FM CNA.................................................. 130
Updating adapter firmware on an Emulex OCe10102-FM
CNA........................................................................................... 137
Configuring Emulex OneConnect FCoE BIOS/boot LUN
settings for OCe10102-FM CNA adapters ........................... 144
Establishing connectivity to the storage array ........................... 154
Verifying connectivity to the storage array................................. 155
Starting HBAnyware for Windows ...................................... 155
Starting device manager for Windows................................. 157
Starting disk management for Windows ............................. 157
Starting PowerPath GUI for Windows................................. 158
Installing additional Navisphere Host Agent software ............ 160
Emulex NPIV solution ................................................................... 162
Chapter 2 Miscellaneous Planning and Procedures
Company
Emulex
Categories
Networks Cards
Model
Emulex LP9802-E
Description
HBAnyware User Manual
Operating Systems
Windows 2003-2008
Version Manual
2.10a7
Size Manual
5.3Mb
File Name
hbanyware.pdf
Information
Qualification: Microsoft currently does not offer an FCoE WHQL "Certified for Windows" logo program. When the Storport Miniport driver is used with a standard Fibre Channel HBA, the driver is qualified for the "Certified for Windows" logo program. When the Storport MiniPort driver is used with an FCoE CNA, the driver is considered "unclassified" by Microsoft. In both cases, the Storport Miniport drivers are digitally signed by Microsoft and will be recognized by both Windows Sever 2003 and Windows Server 2008.
Note >Windows Server 2003 SP2 and the KB943545 update to the Microsoft Storport driver are required. The KB943545 update must be applied before the Emulex Storport Miniport driver can be installed.
HBAnyware Utility Version 4.0

Introduction.............................................................................................................. 1
Known Issues .................................................................................................... 1
Installing HBAnyware Components.......................................................................... 2
Installing the HBAnyware Utility......................................................................... 2
Installing the HBAnyware Utility with Web Launch............................................. 4
Installing the HBAnyware Utility Security Configurator ...................................... 5
Uninstalling the HBAnyware Security Configurator............................................ 6
Uninstalling HBAnyware Web Launch Only ....................................................... 7
Uninstalling the Utility Package ......................................................................... 7
Using the HBAnyware Components......................................................................... 8
Starting the HBAnyware Utility........................................................................... 8
Starting HBAnyware with Web Launch .............................................................. 8
Starting the HBAnyware Security Configurator .................................................. 8
Starting HBAnyware from the Command Line ................................................... 9
Examples of Modifications .................................................................... 9
The HBAnyware Utility Window Element Definitions ....................................... 10
The Menu Bar ........................................................................................... 11
The Toolbar ............................................................................................... 11
The Toolbar Buttons .................................................................................. 11
Sort Toolbar Buttons ........................................................................... 11
The Discovery-Tree................................................................................... 12
Discovery-Tree Icons .......................................................................... 12
Property Tabs............................................................................................ 13
Status Bar ................................................................................................. 13
Changing Management Mode ......................................................................... 13
Resetting HBAs ............................................................................................... 14
Discovering HBAs ........................................................................................... 14
Automatic Fibre Channel Discovery .......................................................... 14
Remote SAN Management Using TCP/IP Access Protocol....................... 15
Adding a Single Host .......................................................................... 15
Adding a Range of Hosts .................................................................... 16
Removing Hosts.................................................................................. 17
Configuring Discovery Settings ................................................................. 18
Sorting HBA Information.................................................................................. 19
Viewing Remote and Local HBAs.............................................................. 19
Viewing HBA Information................................................................................. 20
Viewing Discovery Information .................................................................. 20
HelpDrivers Since March 2000