Edimax PS-3205U Download Drivers and Firmware

Available 3 files for PS-3205U
Company
Edimax
Categories
Networks Cards
Model
Edimax PS-3205U
Description
2 Port USB + 1 Port Parallel Print Server phase out
Operating Systems
Firmware
Version Firmware
v1.35
Size Firmware
1.63Mb
File Name
ps-3205uv135.zip
Company
Edimax
Categories
Networks Cards
Model
Edimax PS-3205U
Description
2 Port USB + 1 Port Parallel Print Server phase out
Operating Systems
Windows 98-98Se-Me-2000-XP-2003-Vista
Version Driver
client 4.2.50
Size Driver
5.72Mb
File Name
ps_util_client_ml-4.2.5.02.zip
Company
Edimax
Categories
Networks Cards
Model
Edimax PS-3205U
Description
2 Port USB + 1 Port Parallel Print Server phase out
Operating Systems
Windows 98-98Se-Me-2000-XP-2003-Vista
Version Driver
admin 4.2.5.0
Size Driver
7.72Mb
File Name
ps_util_admin_ml-4.2.5.0.zip

The following is the important information of Edimax PS-3205U installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the PS-3205U model that was downloaded (for example c:\PS-3205U). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Edimax PS-3205U in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Edimax PS-3205U Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Edimax PS-3205U"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Edimax PS-3205U.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for PS-3205U has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Edimax, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Edimax for PS-3205U.

Edimax PS-3205U Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Edimax PS-3205U" then a properties page appears.
HelpDrivers Since March 2000