Edimax BR-6104KP Download Drivers, Manual and Firmware

Available 4 files for BR-6104KP
Company
Edimax
Categories
Networks Cards
Model
Edimax BR-6104KP
Description
4 Ports Broadband Router with 2 Ports USB Print Server
Operating Systems
Firmware
Version Firmware
v2.20
Size Firmware
1.75Mb
File Name
ediengbr6104kp_2.20.zip
Company
Edimax
Categories
Networks Cards
Model
Edimax BR-6104KP
Description
4 Ports Broadband Router with 2 Ports USB Print Server
Operating Systems
Linux Source Code
Size Driver
63.7Mb
File Name
edilinux-gpl-2006-11-01_br-6104k_gpl2.tar
Company
Edimax
Categories
Networks Cards
Model
Edimax BR-6104KP
Description
4 Ports Broadband Router with 2 Ports USB Print Server
Operating Systems
Manual
Size Manual
2.67Mb
File Name
br-6104kp_m.pdf
Company
Edimax
Categories
Networks Cards
Model
Edimax BR-6104KP
Description
4 Ports Broadband Router with 2 Ports USB Print Server
Operating Systems
Quick Install Guide
Size Driver
632Kb
File Name
br-xxxx_qig2.zip

The following is the important information of Edimax BR-6104KP installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the BR-6104KP model that was downloaded (for example c:\BR-6104KP). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Edimax BR-6104KP in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Edimax BR-6104KP Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Edimax BR-6104KP"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Edimax BR-6104KP.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for BR-6104KP has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Edimax, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Edimax for BR-6104KP.

Edimax BR-6104KP Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Edimax BR-6104KP" then a properties page appears.
HelpDrivers Since March 2000