Edimax AR-7064Sg+ Download Drivers and Manual

Available 2 files for AR-7064Sg+
Company
Edimax
Categories
Networks Cards
Model
Edimax AR-7064Sg+
Description
ADSL2+ Modem Broadband Router Phase out
Operating Systems
Manual
Size Manual
4.24Mb
File Name
ar-7064sgplus_m.zip
Company
Edimax
Categories
Networks Cards
Model
Edimax AR-7064Sg+
Description
ADSL2+ Modem Broadband Router Phase out
Operating Systems
Quick Install Guide
Size Driver
393Kb
File Name
ar-7064sgplus_qig.zip

The following is the important information of Edimax AR-7064Sg+ installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the AR-7064Sg+ model that was downloaded (for example c:\AR-7064Sg+). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Edimax AR-7064Sg+ in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Edimax AR-7064Sg+ Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Edimax AR-7064Sg+"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Edimax AR-7064Sg+.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for AR-7064Sg+ has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Edimax, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Edimax for AR-7064Sg+.

Edimax AR-7064Sg+ Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Edimax AR-7064Sg+" then a properties page appears.
HelpDrivers Since March 2000