D-Link DP-300+ Revision C1 Download Drivers, Manual and Firmware

Available 11 files for DP-300+ Revision C1
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Firmware for revision B/C only
Operating Systems
Firmware
Version Firmware
3.10b4
Size Firmware
541Kb
File Name
dp-300plus_revc1_v310_build_4.zip
Info
DP-300 Revision C1 Firmware for revision B/C only Release notes included Use PSAdmin to load the new firmware Support U DP-300+ Firmware Release Note
Firmware: v3.10 Build 4
Hardware: C1
Date: April 7th, 2006
Problems Resolved:
1. Fixed didn’t district user key in more than 8 characters on DP-300+ web page, since it’s not saved after press “apply”.
2. Fixed configuration file can't backup the IP address and subnet mask.
3. E-mail Notification-- EPSON Color 600 doesn't report 'paper out' status to print server, so print server no action. For most of printers, it will report 'paper out' status, so print server can send an e-mail notification.
Firmware: v3.10
Hardware: C1
Date: June 06, 2005

Enhancements:
1. Support Password setting with maximum length up to 32 characters from Web GUI, and can be login from Web GUI with long password.
Note: Long password setting/login only support on Web GUI, PS Admin is not supported.

Firmware: v3.00
Hardware: C1
Date: Oct 19, 2004

Problems Resolved:
1. Change hardware version from B1 to C1, Re-layout PCB and change CPU from RDC 8822 to RDC 2880.
2. Change RAM from 512KB to 8MB, Flash from 512KB to 2MB for the new HTML image file and new features.
3. Change to Middle Housing.
4. Solve the lack of key component problem.

Enhancements:
1. First release firmware v3.00 to fit the new hardware version.
2. Web supports download firmware.
3. Support UPnP, MAC Rendezvous, SMB/NBT, IPP
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Manual - Hardware
Operating Systems
Manual
Size Manual
197Kb
File Name
dp-300plus_man_hardware.pdf
Info
ABOUT THIS GUIDE..............................................................V
INTRODUCTION......................................................................6
DP-300+ Print Server Features..................................................7
External Features .....................................................................8
Port Connectors ...................................................................... 9
Network Cable Connector...................................................... 10
DC Power Connector............................................................. 10
LED Indicators ...................................................................... 10
Use of Stacking Brackets ....................................................... 11
UNPACKING AND INSTALLATION...................................... 13
Unpacking and Inspecting the Print Server..............................13
Installing the DP-300+............................................................14
Power On Self-Test .................................................................15
Testing Your DP-300+.............................................................17
PRODUCT SPECIFICATIONS .............................................. 18
Printer Connection ..................................................................18
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Manual
Operating Systems
Manual
Size Manual
197Kb
File Name
dp-300plus_man_nov01.pdf
Info
ABOUT THIS GUIDE..............................................................V
INTRODUCTION......................................................................6
DP-300+ Print Server Features..................................................7
External Features .....................................................................8
Port Connectors ...................................................................... 9
Network Cable Connector...................................................... 10
DC Power Connector............................................................. 10
LED Indicators ...................................................................... 10
Use of Stacking Brackets ....................................................... 11
UNPACKING AND INSTALLATION...................................... 13
Unpacking and Inspecting the Print Server..............................13
Installing the DP-300+............................................................14
Power On Self-Test .................................................................15
Testing Your DP-300+.............................................................17
PRODUCT SPECIFICATIONS .............................................. 18
Printer Connection ..................................................................18
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server PS-Admin Manual
Operating Systems
Manual
Size Manual
1.7Mb
File Name
dp-xxx_psadmin_manual.pdf
Info
ABOUT THIS GUIDE................................................................. 1
What’s Not Covered in This User’s Guide.................................................. 1
Contents of the User’s Guide ..................................................................... 2
INTRODUCTION ....................................................................... 3
Background on Print Servers ..................................................................... 3
D-Link Print Server Administration Features............................................. 6
INSTALLING AND STARTING THE PS ADMIN PROGRAM............... 8
System Requirements ................................................................................. 8
Installing PS Admin ................................................................................... 9
Starting PS Admin ................................................................................... 11
GETTING STARTED SETTING UP YOUR PRINT SERVER............. 13
Choosing a Name for Your Print Server................................................... 13
Setting a Password for Your Print Server ................................................. 15
Changing Print Server Port Settings ........................................................ 17
Testing Your Print Server......................................................................... 20
SETTING UP NOVELL NETWARE 3.X PRINTING ........................ 22
Introduction to Novell NetWare Printing ................................................. 22
Print Server Setup Procedure................................................................... 26
Remote Printer Setup Procedure.............................................................. 28
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server LPR for Win 9x/Me Manual
Operating Systems
Manual
Size Manual
268Kb
File Name
dp-xxx_lpr_manual_w9x_me.pdf
Info
Setting up Windows 95 TCP/IP Printing
The D-Link network print server can provide print services to TCP/IP
networks using the lpr/lpd network printing protocol. Most UNIX
systems are capable of supporting lpd, as is Windows NT.
D-Link’s LPR for TCP/IP Printing client gives Windows 95
workstations the ability to print using the lpr/lpd printing protocol.
Though it is possible to print to D-Link network print servers from
Windows 95, this capability is useful if primarily administer your
network from UNIX systems, or if you want to print from workstations
that are only accessible through IP routing.

Installing the LPR for TCP/IP Printing Client
Before your Windows 95 workstation can print using the lpr protocol,
you will need to install the D-Link client program, as follows:
1. Make sure that you have installed the TCP/IP protocol, and have
properly configured the Windows 95 TCP/IP settings. You can
install the protocol from the Network control panel if necessary.
2. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control
Panel folder.
3. Double-click on the Network icon in the Control Panel folder.
4. Click on the Add... button on the Configuration tab.
5. Windows will ask for the type of component to add. Select
Client and click Add... to continue.
6. When Windows asks you to select a network client, click the
Have Disk... button.
7. Insert the LPR client diskette in your computer’s floppy drive (A:
or B:), enter the proper pathname, and click OK.
8. Select the LPR for TCP/IP Printing client and click OK.
9. Windows will copy the necessary files, and return to the
Network dialog. Click OK to let Windows restart.

Adding LPR Printer Ports
Once you have installed the client, and have enabled TCP/IP printing
for the D-Link network print servers, then you need to add a printer
port for each printer you will be printing to using the lpr/lpd
protocol. To add a printer port,
1. From the Start menu, choose the Settings submenu, then the
Control Panel item within it. Windows will display the Control
Panel folder.
2. Double-click on the Network icon in the Control Panel folder.
3. Choose the LPR for TCP/IP Printing client and click the
Properties button.
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Windows XP LPR Printing Guide
Operating Systems
Manual
Size Manual
1.3Mb
File Name
dp-xxx_xp_config.pdf
Info
How to Install D-Link Print Server in the Microsoft Windows XP
TCP/IP environment
To create a TCP/IP remote printer Microsoft TCP/IP printing support must be installed. The
procedure is as follows.
1. To start the Add Printer Wizard, Go into Startà Go into Control Panelà Printers and
Faxes. Click on Add a printer.
2. The ‘Add printer wizard’ should then come up. Click Next.
3. Select ‘Local printer attached to this computer’ and untick ‘Automatically detect and
install my Plug n Play printer’ as the printer will not be plugged in directly to the PC.
Click Next.
Copyright D-Link Europe Technical Support
All trademarks acknowledged
Page 3
4. The wizard will then ask you to Select a Printer Port. Select ‘Create a new port’. Select
Standard TCP/IP Port. Click Next.
5. The ‘Add Standard TCP/IP Printer Port Wizard’ should then come up. Click Next.
6. Specify the IP address of the print server. An arbitrary ‘Port name’ will be generated by
default and this is based on the IP address specified. Please use different names if you
are installing multiple ports for the print server like the DP-100/300. This is because
Windows XP will only allow a unique ‘Port Name’. You can use something like i.e.
192.168.0.10_P1, 192.168.0.10_P2, etc. Click Next.
7. The wizard will then ask for Additional Port Information. Select Custom and then click on
Settings.
8. The ‘Configure Standard TCP/IP Port Monitor’ will then come up. Under protocol, select
LPR. In the ‘LPR Settings’ section, set the ‘Queue Name’ to the name of the port
registered on the print server. The name shown in the example below is using the
default format for port 1 (i.e. PS-616E64-P1). Click OK.
9. The wizard will then confirm the details of the new TCP/IP Printer Port. Click on Finish to
complete the wizard.
10. The ‘Add printer Wizard’ will then start the installation of the Printer drivers. Please
follow this wizard through and install the drivers for your printer accordingly.
11. The wizard will then ask for the name of your printer. Enter the appropriate name for
your printer.
12. Choose whether you wish to share the printer with other network users and enter an
appropriate name.
Copyright D-Link Europe Technical Support
All trademarks acknowledged
Page 8
13. The wizard will then ask for the ‘Location and Comment’ for the printer. Put in the
appropriate details for the printer.
14. The wizard will then ask if you would like to print a test page. Select ‘Yes’ to confirm it
is printing correctly. Once done, click Next.
15. The wizard will confirm that you have successfully installed the printer. Click Finish to
complete the installation.
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Web Configuration Manual
Operating Systems
Manual
Size Manual
359Kb
File Name
dp-300plus_man_web_configuration.pdf
Info
WEB CONFIGURATION ............................................................3
CONFIGURING THE PRINT SERVER....................................4
MANAGEMENT...........................................................................5
SYSTEM STATUS...........................................................................5
PRINTER STATUS..........................................................................6
CONFIGURATION ......................................................................7
SERVER DEVICE............................................................................7
TCP/IP PROTOCOL.......................................................................8
NETBEUI PROTOCOL...................................................................9
APPLETALK PROTOCOL..............................................................10
TOOLS .........................................................................................11
PRINT TEST.................................................................................11
RESET .........................................................................................12
FACTORY RESET .........................................................................13
HELP............................................................................................14
ABOUT........................................................................................14
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Windows 2000 LPR Printing Guide
Operating Systems
Manual
Size Manual
1.2Mb
File Name
dp-xxx_w2k_config.pdf
Info
How to Install D-Link Print Server in the Microsoft Windows 2000 TCP/IP
environment
To create a TCP/IP remote printer Microsoft TCP/IP printing support must be installed. The
procedure is as follows.
1. To start the Add Printer Wizard, select Settings - Printers from the Start menu and doubleclick
on the Add Printer icon.
2. The Wizard asks you to select between Local printer and Network printer. Select Local printer
(Disable Automatically detect my printer), as the DP-100/101/300/301/301P emulates a local
printer port. Click Next>.
3. The Wizard asks you to select between Use the following port and Create a new port. Select
Create a new port. Then Select Standard TCP/IP port and click Next>.
4. From the Add Standard TCP/IP Printer Port dialog, enter the IP address of your print server
and define a logical port name. Click Next>.
5. The Wizard asks you to select between Standard and Custom. Select Custom and click
Setting.
6. From the Configure Standard TCP/IP Port dialog, select LPR and enter the port name of your
print server you wish to use in the Queue Name field. Click OK.
7. Choose an appropriate print driver for your printer.
8. Enter an appropriate name for your printer.
9. Choose whether you wish to share the printer with other network users and enter an
appropriate name.
10. Choose Yes to confirm whether the printer is installed properly.
11. You have successfully added a new printer. Click Finish.
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server Manual v3.00
Operating Systems
Manual
Size Manual
7.6Mb
File Name
dp-300plus_manual_v3.00.pdf
Info
Package Contents.................................................................................3
Introduction............................................................................................4
External Features ..................................................................................6
Using the Web Configuration .................................................................9
TCP/IP Printing for Windows XP........................................................26
TCP/IP Printing for Windows 2000.....................................................34
TCP/IP Printing for Windows 98SE/Me ..............................................43
Unix/Linux Printing (See PS Admin Manual on CD-ROM) .................54
Setting up AppleTalk or LPR Printing in MAC OSX..............................55
Setting up AppleTalk Printing in MAC OS9 ..........................................60
Networking Basics ..............................................................................63
Technical Specifications ......................................................................75
Warranty and Registration ...................................................................77
Appendix: DP-300+ Printer Compatibility List ....................................80
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server LPR Software
Operating Systems
Windows 95-98-98Se-Me
Version Driver
1.00
Size Driver
95Kb
File Name
dp-xxx_sw_lpr_for_w9x_me.zip
Company
D-Link
Categories
Networks Cards
Model
D-Link DP-300+ Revision C1
Description
3-Port Multi-Protocol Print Server PS-Admin Software
Operating Systems
Windows 95-98-98Se-Me-NT4-2000-XP
Version Driver
3.00
Size Driver
1.7Mb
File Name
dp-xxx_sw_ps-admin_v3.00.zip
HelpDrivers Since March 2000