D-Link DI-206 Networks Cards > Downloads Utilities, Manual, Firmware and BIOS

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-206

Description

Remote Access Configuration Guide

Operating System

Manual

Size Driver

454KB

File Name

di-206_remote_access_installation_guide.doc

Observations

DI-206/308 Remote Access Configuration Guide
Model: DI-206/308 ISDN Routers
Firmware Version DI-206 v1.85, DI-308 v1.00
OS Supported: Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT 4.0 and Windows 2000.
Introduction
To setup a Remote Access configuration, first ensure you have Routeman configurator software installed on your PC. The current version of Routeman as at 4th July 2001 is version 1.20.11.
Routeman Configuration
When you run Routeman it will discover DI-208 router connected to your local area network.

If the IP address is not set, you can at this stage set an appropriate IP address for the router. Enter the IP address and the mask then click on the pencil tab to save.
Double click the DI-206 from the list you like to configure, enter 'Admin' as the default password.

ISDN Data - this is the local ISDN number. The ISDN number the router is connected too.
Country ID - Select appropriate country id.
Auth Type - Select PAP. Router will auto negotiate, however select PAP for default.
Select Next to continue with wizard configuration

Company

D-Link

Categories

Networks Cards

Model

D-Link DI-206

Description

LAN to LAN Configuration Guide

Operating System

Manual

Size Driver

840KB

File Name

di-206_lan-lan_configuration_guide.doc

Observations

DI-206/308 LAN-to-LAN Configuration Guide
Model: DI-206/308 ISDN Routers
Firmware Version: DI-206 v1.85, DI-308 v1.00
OS Supported: Windows 95, Windows 98, Windows 98SE, Windows Me, Windows NT 4.0 and Windows 2000.
Introduction
To setup a LAN-LAN configuration, first ensure you have Routeman configurator installed on your PC. The current version of Routeman as at 4th July 2001 is version 1.20.11.
Routeman Configuration
When you run Routeman it will discover DI-208 routers connection to your local area network.

Fig 1. Routeman Discovers DI-206
If the IP address is not set, you can at this stage set an appropriate IP address for the router. Enter the IP address and the mask then click on the pencil tab to save.
Double click the DI-206 from the list you like to configure, enter 'Admin' as the default password.
Click on the wizard tab to start the wizard configuration.
ISDN Data - this is the local ISDN number. The ISDN number the router is connected too.
Country ID - Select appropriate country id.
Auth Type - Select PAP. Router will auto negotiate, however select PAP for default.
Select Next to continue with wizard configuration
For LAN to LAN, leave the Remote access selected and click next.
Change Internet Access to 'LAN to Remote LAN'. Notice the profile indicator moves to the profile below ISP. Type a suitable name for the remote network your connecting to, and select next.
In normal LAN to LAN configurations you will not use a numbered link, therefore change the link method to Unnumbered. Now select which B channel will be used to connect to this remote network, L1 or L2. Select next to continue.

Access to Official Website D-Link

Home English Home Spanish Home French Home German Drivers English Drivers Spanish Drivers French Drivers German

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 9 files for D-Link DI-206

Select Files