Available 1 files for Conceptronic CSP100TLC

Company

Conceptronic

Categories

Networks Cards

Model

Conceptronic CSP100TLC

Description

Drivers

Operating System

Windows 98-98Se-Me-2000-XP

Version

1.0

Size Driver

1MB

File Name

consp100tlc.exe

Observations

README.TXT VERSION 2.3
Installing The 10/100 32Bits Fast Ethernet PC Card Driver

This file describes the steps to install the 10/100 Base-TX CardBus Ethernet
Network Card which will allow your notebook PC to connect to the network.

Before You Install the Network Driver

Please make sure you know the network driver you should be using. The OS environments supported by this 10/100 Base-TX CardBus Ethernet Network Card are provided in the list below:

Windows 95 version 4.00.950 or 4.00.950a
Windows 95 version 4.00.950b or OSR2
Windows NT version
Windows 98
Windows 98_ME
Windows 2000
Windows XP
NetWare ODI Client
NDIS2
linux
MacOS
Pktdrv
=======================================================================
Windows 2000

1. Start the computer, insert the 10/100 Fast Ethernet CardBus PC Card into a slot, make sure the card is securely
inserted into the socket. Windows 2000 will show "Found New Hardware".
This PC card uses Realtek RTL8139 IC which has driver built-in Windows 2000.
Windows 2000 will automatically install the driver. The driver runs ok, but without the function of ACPI
(Advanced Configuration and Power Interface).
If the user is satisfied with this driver, then the installation is completed. The user does NOT need to go
through following steps. Please restart the computer and the network function will be ready.
2. If the user wants to accommodate ACPI function into the 10/100 Fast Ethernet CardBus PC Card. Then the user
needs to update the driver to which we support in the driver diskette. Please select "My Computer" then "Control
Panel" then "System", then "Hardware", then "Device Manager", then select "Network adapters", and select
"Realtek RTL8139(A)-based PCI Fast Ethernet Adapter".
3. Click "Action" and then click "Properties".
4. In the properties window, select "Driver", and click "Update Driver".
5. Windows 2000 will show "Welcome to the Upgrade Device Driver Wizard", Click "Next".
6. Select "Search for a suitable driver for my device" and click "Next" .
7. Insert the driver disk and select the location where the driver is located, then click "Next".
8. Key in the driver location "A:\Win2000" and click "Next".
9. The windows found the driver, click "Next" to continue.
10. Digital signature not found, click "Yes" to continue the installation.
11. Windows will automatically copy the driver files and related files into the system. After copying the driver files,
the device installation is completed, click "Finish".
12. The Device Manager window pops up, please check "Network adapters", if "Fast Ethernet
CardBus PC Card" is presented, then the update driver operation is OK.
13. Restart the computer and the 10/100 Fast Ethernet CardBus PC Card will be ready
=======================================================================
Windows XP

1. Start the computer, insert the 10/100 Fast Ethernet CardBus PC Card into a slot, make sure the card is securely
inserted into the socket. Windows 2000 will show "Found New Hardware".
This PC card uses Realtek RTL8139 IC which has driver built-in Windows XP.
Windows XP will automatically install the driver. The driver can run ok, but without the function of ACPI
(Advanced Configuration and Power Interface).
If the user is satisfied with this driver, then the installation is completed. The user does NOT need to go
through following steps. Please restart the computer and the network function will be ready.
2. If the user wants to accommodate ACPI function into the 10/100 Fast Ethernet CardBus PC Card. Then the user
needs to update the driver to which we support in the driver diskette. Please select "My Computer", then "Control
Panel" at part of other places, then "System", then "Hardware", then "Device Manager", then select "Network adapters"
and select "Realtek RTL8139Family PCI Fast Ethernet NIC".
3. Click "Action" and then click "Properties".
4. In the properties window, select "Driver", and click "Update Driver".
5. Windows XP will show "Welcome to the Hardware Update Wizard". Click "Next" after choose "Install from a list or specific
location (Advanced)".
6. Select "Don't search, I will choose the driver to install." and click "Next".
7. Click "Have Disk" after insert the driver disk.
8. Key in the driver location "A:\WinXP" in the Copy manufactuer's files from" box and click "OK".
9. The windows found the driver, choose one of the Network Adapter driver, and click "Next" to continue.
10. It could has not passed windows logo testing to verify it's compatibility with Windows XP. Just click "Yes" to
continue the installation.
11. Windows will automatically copy the driver files and related files into the system. After copying the driver files,
the device installation is completed, click "Finish".