Comet Labs JS100 Download Drivers, Manual and Firmware

Available 4 files for JS100
Company
Comet Labs
Categories
Networks Cards
Model
Comet Labs JS100
Description
Network Disk - LANDisk
Operating Systems
User manual
Language Manual
English
Size Manual
1.6Mb
File Name
js100_manual_us.zip
Company
Comet Labs
Categories
Networks Cards
Model
Comet Labs JS100
Description
Network Disk - LANDisk
Operating Systems
Firmware
Language Firmware
English-French
Version Firmware
1.31-20
Size Firmware
9.8Mb
File Name
js100-sqp-1.3.1.20.img
Information
Firmware version 1.31-20 (English/french) - Image file (.IMG)
Company
Comet Labs
Categories
Networks Cards
Model
Comet Labs JS100
Description
Network Disk - LANDisk
Operating Systems
Quick Installation guide
Language Driver
French
Size Driver
1Mb
File Name
js100_qig_fr.zip
Company
Comet Labs
Categories
Networks Cards
Model
Comet Labs JS100
Description
Network Disk - LANDisk
Operating Systems
User manual
Language Manual
French
Size Manual
4.1Mb
File Name
js100_manual_fr.zip

The following is the important information of Comet Labs JS100 installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the JS100 model that was downloaded (for example c:\JS100). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Comet Labs JS100 in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Comet Labs JS100 Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Comet Labs JS100"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Comet Labs JS100.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for JS100 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Comet Labs, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Comet Labs for JS100.

Comet Labs JS100 Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Comet Labs JS100" then a properties page appears.
HelpDrivers Since March 2000