Available 3 files for Fast-200WL
Company
Cnet
Categories
Networks Cards
Model
Cnet Fast-200WL
Description
Wake-on-LAN PCI Fast Ethernet Adapter
Operating Systems
Windows 98-98Se-Me-2000-XP
Version Driver
1.02 (A)
Size Driver
538Kb
File Name
fast200awl.zip
Info
If the alphabetical letter number is A Windows 98, Windows 98 SE, Windows2000, Windows ME, Windows XP
Introduction:
-------------
This document describes the procedure to install Windows 98/98 SE
Windows 2000 and Windows ME driver for CNet FAST200 PCI Fast
Ethernet adapter.
Location of Windows 98/98 SE Driver : \win98
Location of Windows 2000 Driver : \win2000
Location of Windows ME Driver : \winme
Location of Windows XP Driver : \winxp
Installing driver for Win98/Win98 SE/Windows2000/Windows ME/Windows XP :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Win98 SE/Windows2000/Windows ME/Windows XP, it will
auto-detect your system configuration and find the adapter hardware.
( If Win98/Win98 SE/Windows2000/Windows ME/Windows XP does not prompt
that it detects the PCI Ethernet adapter,there must be something wrong
with the CNet FAST200 PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the CNet FAST200 driver disk into drive A and specify
the setup file pathname A:\win98 (for Windows 98/98 SE) or
A:\win2000 (for Windows 2000)
A:\winme (for Windows ME)
A:\winxp (for Windows XP)
3. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will appear some
messages to insert Win98/Win98 SE/Windows2000/Windows ME/Windows XP
system disk to complete setup step.
4. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will finish the other
installation procedure automatically, then you restart the system.
-----------------------------------------------------------------------------------
Windows 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT4.0 driver for
CNet FAST200 PCI Fast Ethernet adapter.
Location of NT 4.0 Driver : \WINNT
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select " Requires disk from
manufacturer", and then press button.
5. Insert the CNet FAST200 driver disk in drive A, enter drive and pathname
A:\winnt4 which is the path where the setup file OEMSETUP.INF is located,
and then choose the OK button.
6. The screen will appear "Select Line Speed" dialog box which is provide
by RTL8139.SYS driver. The default value is "auto" so that the
CNet FAST200 PCI Fast Ethernet adapter and its driver RTL8139.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the RTL8139.SYS is
loading. The other values, "10" or "100", are only used when you want
to forced CNet FAST200 PCI Wake On LAN Fast Ethernet Adapter to 10Mb
or 100Mb.
Introduction:
-------------
This document describes the procedure to install Windows 98/98 SE
Windows 2000 and Windows ME driver for CNet FAST200 PCI Fast
Ethernet adapter.
Location of Windows 98/98 SE Driver : \win98
Location of Windows 2000 Driver : \win2000
Location of Windows ME Driver : \winme
Location of Windows XP Driver : \winxp
Installing driver for Win98/Win98 SE/Windows2000/Windows ME/Windows XP :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Win98 SE/Windows2000/Windows ME/Windows XP, it will
auto-detect your system configuration and find the adapter hardware.
( If Win98/Win98 SE/Windows2000/Windows ME/Windows XP does not prompt
that it detects the PCI Ethernet adapter,there must be something wrong
with the CNet FAST200 PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the CNet FAST200 driver disk into drive A and specify
the setup file pathname A:\win98 (for Windows 98/98 SE) or
A:\win2000 (for Windows 2000)
A:\winme (for Windows ME)
A:\winxp (for Windows XP)
3. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will appear some
messages to insert Win98/Win98 SE/Windows2000/Windows ME/Windows XP
system disk to complete setup step.
4. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will finish the other
installation procedure automatically, then you restart the system.
-----------------------------------------------------------------------------------
Windows 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT4.0 driver for
CNet FAST200 PCI Fast Ethernet adapter.
Location of NT 4.0 Driver : \WINNT
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select "
manufacturer", and then press
5. Insert the CNet FAST200 driver disk in drive A, enter drive and pathname
A:\winnt4 which is the path where the setup file OEMSETUP.INF is located,
and then choose the OK button.
6. The screen will appear "Select Line Speed" dialog box which is provide
by RTL8139.SYS driver. The default value is "auto" so that the
CNet FAST200 PCI Fast Ethernet adapter and its driver RTL8139.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the RTL8139.SYS is
loading. The other values, "10" or "100", are only used when you want
to forced CNet FAST200 PCI Wake On LAN Fast Ethernet Adapter to 10Mb
or 100Mb.
Company
Cnet
Categories
Networks Cards
Model
Cnet Fast-200WL
Description
Wake-on-LAN PCI Fast Ethernet Adapter
Operating Systems
Windows 98-98Se-Me-2000-XP
Version Driver
1.00 (D)
Size Driver
538Kb
File Name
fast200dwl.zip
Info
If the alphabetical letter number is D Windows 98, Windows 98 SE, Windows2000, Windows ME, Windows XP
Introduction:
-------------
This document describes the procedure to install Windows 98/98 SE
Windows 2000 and Windows ME driver for CNet FAST200 PCI Fast
Ethernet adapter.
Location of Windows 98/98 SE Driver : \win98
Location of Windows 2000 Driver : \win2000
Location of Windows ME Driver : \winme
Location of Windows XP Driver : \winxp
Installing driver for Win98/Win98 SE/Windows2000/Windows ME/Windows XP :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Win98 SE/Windows2000/Windows ME/Windows XP, it will
auto-detect your system configuration and find the adapter hardware.
( If Win98/Win98 SE/Windows2000/Windows ME/Windows XP does not prompt
that it detects the PCI Ethernet adapter,there must be something wrong
with the CNet FAST200 PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the CNet FAST200 driver disk into drive A and specify
the setup file pathname A:\win98 (for Windows 98/98 SE) or
A:\win2000 (for Windows 2000)
A:\winme (for Windows ME)
A:\winxp (for Windows XP)
3. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will appear some
messages to insert Win98/Win98 SE/Windows2000/Windows ME/Windows XP
system disk to complete setup step.
4. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will finish the other
installation procedure automatically, then you restart the system.
-----------------------------------------------------------------------------------
Windows 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT4.0 driver for
CNet FAST200 PCI Fast Ethernet adapter.
Location of NT 4.0 Driver : \WINNT
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select " Requires disk from
manufacturer", and then press button.
5. Insert the CNet FAST200 driver disk in drive A, enter drive and pathname
A:\winnt4 which is the path where the setup file OEMSETUP.INF is located,
and then choose the OK button.
6. The screen will appear "Select Line Speed" dialog box which is provide
by RTL8139.SYS driver. The default value is "auto" so that the
CNet FAST200 PCI Fast Ethernet adapter and its driver RTL8139.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the RTL8139.SYS is
loading. The other values, "10" or "100", are only used when you want
to forced CNet FAST200 PCI Wake On LAN Fast Ethernet Adapter to 10Mb
or 100Mb.
Introduction:
-------------
This document describes the procedure to install Windows 98/98 SE
Windows 2000 and Windows ME driver for CNet FAST200 PCI Fast
Ethernet adapter.
Location of Windows 98/98 SE Driver : \win98
Location of Windows 2000 Driver : \win2000
Location of Windows ME Driver : \winme
Location of Windows XP Driver : \winxp
Installing driver for Win98/Win98 SE/Windows2000/Windows ME/Windows XP :
-------------------------------------------------------------------
Before you start with the installation process, make sure that your
adapter should be properly installed in your PCI bus slot.
Executing Win98/Win98 SE/Windows2000/Windows ME/Windows XP, it will
auto-detect your system configuration and find the adapter hardware.
( If Win98/Win98 SE/Windows2000/Windows ME/Windows XP does not prompt
that it detects the PCI Ethernet adapter,there must be something wrong
with the CNet FAST200 PCI Fast Ethernet Adapter or your system enviroment.)
1. Ask you to select which driver you want to install, select "Driver
from disk provided by hardware manufacturer".
2. Insert the CNet FAST200 driver disk into drive A and specify
the setup file pathname A:\win98 (for Windows 98/98 SE) or
A:\win2000 (for Windows 2000)
A:\winme (for Windows ME)
A:\winxp (for Windows XP)
3. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will appear some
messages to insert Win98/Win98 SE/Windows2000/Windows ME/Windows XP
system disk to complete setup step.
4. Win98/Win98 SE/Windows2000/Windows ME/Windows XP will finish the other
installation procedure automatically, then you restart the system.
-----------------------------------------------------------------------------------
Windows 4.0
Introduction:
-------------
This document describes the procedure to install Windows NT4.0 driver for
CNet FAST200 PCI Fast Ethernet adapter.
Location of NT 4.0 Driver : \WINNT
Installing driver procedure on Microsoft Windows NT :
-----------------------------------------------------
When you are in Windows NT :
1. In the Main group of NT, select the "Control Panel" icon.
2. In the Control Panel window, choose the "Network" icon.
3. In the Network Settings dialog box, choose the "Add Adapter" button.
The Add Network Adapter dialog box appears.
4. In the list of network cards, select "
manufacturer", and then press
5. Insert the CNet FAST200 driver disk in drive A, enter drive and pathname
A:\winnt4 which is the path where the setup file OEMSETUP.INF is located,
and then choose the OK button.
6. The screen will appear "Select Line Speed" dialog box which is provide
by RTL8139.SYS driver. The default value is "auto" so that the
CNet FAST200 PCI Fast Ethernet adapter and its driver RTL8139.SYS will
auto-detect the line speed, 10 Mb or 100Mb, while the RTL8139.SYS is
loading. The other values, "10" or "100", are only used when you want
to forced CNet FAST200 PCI Wake On LAN Fast Ethernet Adapter to 10Mb
or 100Mb.
Company
Cnet
Categories
Networks Cards
Model
Cnet Fast-200WL
Description
Wake-on-LAN PCI Fast Ethernet Adapter
Operating Systems
Windows Vista
Version Driver
B/D
Size Driver
3.7Mb
File Name
fast200bd200wlbd_vista.zip
Info
If the alphabetical letter number is B/D Realtek 8139 and 8139C+ NDIS 5.1 driver (for Windows Vista)
-----------------------------------------
Version 6.101.1123
1. Fix the driver bug: 'Network Address' not reset to original to MAC address
After 'Network Address' changed and then cleared, the MAC address does not reset to the original one.
('Network Address' is in the Device Manager | Properties | Advanced | Property)
2. Fix the driver bug : performance is slow in battery mode
3. Fix the driver bug : Magic packet may not wake up when host in S5 state
4. lower CPU utilization
5. Known issue : Automatic driver installer could not roll back to inbox driver.
It rollbacks to most recently installed WHQL driver.
This issue is still under investigation.
Please refer 'Driver_Installer_Rollback.txt' for more detail.
------------------------------------------------
Version 6.100.1106
1. Version major number changed
Use for distinct version number from Windows XP
2. fix system fails to wakeup bug
The mask is incorrect if the added wakeup pattern length is short
3. fix unicast wake up bug.
Even the system only accept magic packet, it wakes when receives a unicast frame
------------------------------------------------
Version 5.642
1. first version for Vista logo
------------------------------------------------
Version 5.641
1. Add some OIDs for 3rd-party diagnostic application
------------------------------------------------
Version 5.640
1. inbox for Windows Vista
-----------------------------------------
Version 6.101.1123
1. Fix the driver bug: 'Network Address' not reset to original to MAC address
After 'Network Address' changed and then cleared, the MAC address does not reset to the original one.
('Network Address' is in the Device Manager | Properties | Advanced | Property)
2. Fix the driver bug : performance is slow in battery mode
3. Fix the driver bug : Magic packet may not wake up when host in S5 state
4. lower CPU utilization
5. Known issue : Automatic driver installer could not roll back to inbox driver.
It rollbacks to most recently installed WHQL driver.
This issue is still under investigation.
Please refer 'Driver_Installer_Rollback.txt' for more detail.
------------------------------------------------
Version 6.100.1106
1. Version major number changed
Use for distinct version number from Windows XP
2. fix system fails to wakeup bug
The mask is incorrect if the added wakeup pattern length is short
3. fix unicast wake up bug.
Even the system only accept magic packet, it wakes when receives a unicast frame
------------------------------------------------
Version 5.642
1. first version for Vista logo
------------------------------------------------
Version 5.641
1. Add some OIDs for 3rd-party diagnostic application
------------------------------------------------
Version 5.640
1. inbox for Windows Vista
