Belkin F5D8001 Download Drivers

Available 1 files for F5D8001
Networks Cards
Belkin F5D8001
N1 Wireless Desktop Card
Operating Systems
Windows 2000-XP
Version Driver
Size Driver
File Name

The following is the important information of Belkin F5D8001 installation driver.

Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the F5D8001 model that was downloaded (for example c:\F5D8001). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Belkin F5D8001 in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Belkin F5D8001 Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Belkin F5D8001"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Belkin F5D8001.

  • If during installation in Windows, you will be prompted with a message warning that the driver software for F5D8001 has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Belkin, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Belkin for F5D8001.

Belkin F5D8001 Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Belkin F5D8001" then a properties page appears.

Available 1 Drivers

HelpDrivers Since March 2000