Ame Group Lan100M Download Drivers

Available 5 files for Lan100M
Company
Ame Group
Categories
Networks Cards
Model
Ame Group Lan100M
Description
AVI file decoder TVphone98 w-VCR and AverStudio
Operating Systems
Windows 2000
Size Driver
17Kb
File Name
lan_w2k.zip
Company
Ame Group
Categories
Networks Cards
Model
Ame Group Lan100M
Description
AVI file decoder TVphone98 w-VCR and AverStudio
Operating Systems
Windows 95
Size Driver
14Kb
File Name
lan_95.zip
Company
Ame Group
Categories
Networks Cards
Model
Ame Group Lan100M
Description
AVI file decoder TVphone98 w-VCR and AverStudio
Operating Systems
Windows 98
Size Driver
11Kb
File Name
lan_98.zip
Company
Ame Group
Categories
Networks Cards
Model
Ame Group Lan100M
Description
AVI file decoder TVphone98 w-VCR and AverStudio
Operating Systems
Windows NT4
Size Driver
24Kb
File Name
lan_nt.zip
Company
Ame Group
Categories
Networks Cards
Model
Ame Group Lan100M
Description
AVI file decoder TVphone98 w-VCR and AverStudio
Operating Systems
Windows XP
Size Driver
15Kb
File Name
lanusb_xp.zip

The following is the important information of Ame Group Lan100M installation driver.



Installation instructions for Networks Cards Only.
Important! These instructions may not be applicable to other device networks.

  • Click on Download Now and a File Download box will appear.
    Select Save This Program to Disk and a Save As box will appear.
    Select a directory to save the driver in and click Save.
    Locate the driver file using Windows Explorer when the download has completed.

  • Running the downloaded file will extract all the driver files and setup program into a directory on your hard drive. The directory these driver are extracted to will have a similar name to the Lan100M model that was downloaded (for example c:\Lan100M). The setup program will also automatically begin running after extraction. However, automatically running setup can be unchecked at the time of extracting the driver file.

  • Install the card Ame Group Lan100M in the slot and connect the cable to the network; turn on the computer and start Windows.

  • When Windows starts, a "Found New Hardware Wizard" dialog box appears identifying the card as a "Ethernet Controller"; Select "Search for a suitable driver for your device (Recommended)".

    NOTE, if the "Found New Hardware Wizard" dialog box does not appear, Windows fails to detect your adapter. There may be problem with the adapter itself or with the system BIOS.

  • Click Next then enable the "Specify a location" check box; specify the correct path in which Ame Group Lan100M Adapter driver for Windows resides.

  • Click Next then Windows identifies the card as "Ame Group Lan100M"

  • Click Next to let Windows finishes the driver installation.

  • Search and consult the Readme file for additional installation drivers instructions for your Ame Group Lan100M.



  • If during installation in Windows, you will be prompted with a message warning that the driver software for Lan100M has not passed Windows Logo testing. Select Continue Anyway and proceed with the installation. The driver is completely tested and verified by Ame Group, and safe to use.

Depending on the environment that you are using, a Windows driver provided by Microsoft may be installed automatically on your computer. However, it is recommended that you use this official driver provided by Ame Group for Lan100M.

Ame Group Lan100M Configuration:

1. Double click "My Computer".
2. Double click "Control Panel".
3. Double click "System" icon.
4. Click "Hardware" tab then click "Device Manager..."
5. Open "Network Adapters" icon.
6. Double click "Ame Group Lan100M" then a properties page appears.


Available 5 Drivers

HelpDrivers Since March 2000