PC Chips T16 (V1.0C) Download Manual


Motherboard User’s Guide
This publication, including photographs, illustrations and software,is under the protection of international copyright laws, with allrights reserved. Neither this manual, nor any of the materialcontained herein, may be reproduced without the express writtenconsent of the manufacturer.
The information in this document is subject to change withoutnotice. The manufacturer makes no representations or warrantieswith respect to the contents hereof and specifically disclaims anyimplied warranties of merchantability or fitness for any particularpurpose. Further, the manufacturer reserves the right to revise thispublication and to make changes from time to time in the contenthereof without obligation of the manufacturer to notify any personof such revision or changes.
Trademarks
IBM, VGA, and PS/2 are registered trademarks of International
Business Machines.
Intel, Pentium/II/III, Pentium 4, Celeron and MMX are registeredtrademarks of Intel Corporation.
Microsoft, MS-DOS and Windows 98/ME/NT/2000/XP areregistered trademarks of Microsoft Corporation.
AMI is a trademark of American Megatrends Inc.
It has been acknowledged that other brands or product names inthis manual are trademarks or the properties of their respectiveowners.
Copyright © 2004
All Rights Reserved
T16 Series, V1.0C
I865PE/November 2004ii
Motherboard User’s Guide
Table of Contents
Trademark ................................................................................... i
Features and Checklist Translation........................................ v
Chapter 1: Introduction ............................................................ 1
Key Features ........................................................................................ 2
Package Contents ................................................................................ 6
Chapter 2: Mainboard Installation.......................................... 7
Mainboard Components ...................................................................... 8
I/O Ports ............................................................................................... 9
Installing the Processor ..................................................................... 10
Installing Memory Modules ............................................................... 11
Jumper Settings ..................................................................................13
Install the Motherboard ..................................................................... 14
Connecting Optional Devices............................................................15
Install Other Devices .......................................................................... 17
Expansion Slots.................................................................................. 20
Chapter 3: BIOS Setup Utility............................................... 22
Introduction ....................................................................................... 22
Running the Setup Utility ........................... …………………………...23
Standard CMOS Setup Page .............................................................24
Advanced Setup Page ........................................................................25
Features Setup Page ..........................................................................27
Power Management Setup Page ........................................................29
PCI/Plug and Play Setup Page.......................................................... 31
BIOS Security Features Setup Page .................................................. 32
CPU PnP Setup Page ......................................................................... 33
Hardware Monitor Page ....................................................................34
Load Best Performance Settings ........................................................ 34
Load Optimal Defaults ....................................................................... 35
Save Changes and Exit ......................................................................35
Discard Changes and Exit ................................................................. 35
Chapter 4: Software & Applications ..................................... 36
Introduction ....................................................................................... 36
Installing Support Software...............................................................37
Bundled Software Installation ........................................................... 39
Hyper Threading CPU ....................................................................... 40iii
Motherboard User’s Guide
Static Electricity Precautions
Static electricity could damage components on this motherboard.
Take the following precautions while unpacking this motherboardand installing it in a system.
1. Don’t take this mainboard and components out of theiroriginal static-proof package until you are ready to installthem.
2. While installing, please wear a grounded wrist strap ifpossible. If you don’t have a wrist strap, discharge staticelectricity by touching the bare metal of the system chassis.
3. Carefully hold this motherboard by its edges. Do not touchthose components unless it is absolutely necessary. Put thismotherboard on the top of static-protection package withcomponent side facing up while installing.
Pre-Installation Inspection
1. Inspect this mainboard whether there are any damages tocomponents and connectors on the board.
2. If you suspect this mainboard has been damaged, do notconnect power to the system. Contact your motherboardvendor about those damages.iv
Motherboard User’s Guide
Notice:Owing to Microsoft’s certifying schedule is various to every
supplier, we might have some drivers not certified yet by
Microsoft. Therefore, it might happen under Windows XP that
a dialogue box (shown as below) pop out warning you this
software has not passed Windows Logo testing to verify its
compatibility with Windows XP. Please rest assured that our
RD department has already tested and verified these drivers.
Just click the “Continue Anyway” button and go ahead the
installation.v
Motherboard User’s Guide
Traduction des Caractéristiques & Liste de contrôle
Liste de contrôle
Le coffret de votre carte mère contient les éléments suivants: • La carte mère
• Le Manuel utilisateur
• Un câble plat pour lecteur de disquette (optionnel)
• Une câble plat pour lecteur IDE
• CD de support de logiciels
Caractéristiques
Prise en charge du Processeur LGA Socket-775
• Supporte le Processeur Intel Pentium 4 series avec la Technologie Hyper
Threading
• Supporte un Bus Avant allant jusqu’à 800 MHz
La technologie “Hyper-Threading” permet au système d’exploitation de penser qu’il est connecté à deux processeurs, permettant d’exécuter deux threads en parallèle, à la fois sur des processeurs ‘logiques’ dans le même processeur physique.
Chipset
Ce chipset comporte Intel 865PE Northbridge et Intel 82801EB I/O Controller
Hub (ICH5) conformément à une architecture novatrice et dimensionnable avec une fabilité et des performances prouvées.
• L’interface AGP supporte les transferts de données AGP 4X/8X et AGP Fast
Writes 4X/8X.
• Supporte 4 Go de mémoire système et a une bande passante maximum de
6.4 Go/s en utilisant la DDR400 en mode de canal double.
• Intègre un contrôleur Ultra ATA 100, deux contrôleurs d’hôte ATA Série, un contrôleur d’hôte EHCI, et quatre contrôleurs d’hôte UHCI supportant huit ports USB 2.0 externes.
• Interfact de Bus PCI supporte les Spécifcations PCI Révision 2.3
• Contrôleur LAN intégré: Conforme WfM 2.0 et IEEE802.3
• Contrôleur d’Hôte ATA Série intégré: Opération DMA indépendante et Vitesse de Transfert allant jusqu’à 1.5 Gb/s (150 Mo/s).
Support de Mémoire
• Quatre logements DIMM 184 broches pour modules mémoire DDR SDRAM
• Supporte le bus mémoire DDR400
• La mémoire maximum installée est 4Go
Logements d’Extension
• Un logement CNR
• Un logement 8x/4xAGP
• Cinq logements PCI 32 bits pour interface de bus conforme PCI 2.3
Canaux IDE internes
• Deux Connecteurs IDE
• Prend en Charge les modes PIO (Entrée/Sortie Programmable) et DMA (Ac-cès Direct à la Mémoire)vi
Motherboard User’s Guideiii
Motherboard User’s Guide
• Supporte maîtrise de bus Ultra DMA IDE avec vitesse de transfert de 33/66/
100 Mo/sec
ATA Série
• Deux ATA Série connecteurs
• Vitesse de transfert supérieure au meilleur ATA (~150 Mo/s) avec extensibilité aux vitesses supérieures
• Comptage de broche faible pour l’hôte et les périphériques
AC’97 Codec
• L’architecture matérielle 6-CH permet au southbridge multi-canal de lire l’audio
6CH
• Compatible Intel
?
AC’97 (REV. 2.3), conforme aux exigences de Microsoft
?

PC2001
• Tampon d’écouteur intégré et PLL interne, le dernier cristal supplémentaire d’économie
• Lignes d’entrée/ sortie arrière partageant la même prise ; Centre/basse part-ageant la prise MIC
• Support de SORTIE S/PDIF numérique
• CRL
?
3D: HRTF basé BS3D compatible moteur audio
Ports E/S Internes
La carte mère possède un jeu complet de ports d’E/S et de connecteurs:• Deux ports PS/2 pour souris et clavier
• Un port série
• Un port parallèle
• Maximum huit ports USB 2.0 (quatre ports fond de panier, connecteurs USB internes USB2/USB3 offrant quatre ports supplémentaires)
• Prises audio pour microphone, ligne d’entrée et ligne de sortie
LAN Ethernet intégré (optionnel)
• LAN Gigabit Interne: - Emetteur-récepteur intégré 10/100/1000
- Auto Négotiation avec capacité de page Suivante
- Supporte le contrôle de fux en Full Duplex (IEEE 802.3x), et marquage
VLAN IEEE 802.1Q
- Entièrement conforme à IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Onboard 10/100Mbps Ethernet LAN:Fonctionnement 10 Mb/s et 100 Mb/s
- Fast Ethernet MAC intégré, puce physique, et émetteur-récepteur sur
une seule puce
- Supporte l’auto-négociation N-way en 10Mb/s et 100Mb/s
- Supporte la gestion d’alimentation ACPI
- Contrôle de Flux en Full Duplex (IEEE 802.3x) et capacité Half/Full duplex
USB 2.0
• Conforme aux Spécifcations de Bus Série Universel Révision 2.0
• Conforme aux Spécifcations d’interface de Contrôleur d’Hôte Amélioré de
Intel Révision 1.0ii
Motherboard User’s Guidevii
Motherboard User’s Guide
• Conforme aux Spécifcations d’Interface de Contrôleur d’Hôte Universel
Révision 1.1
• Le périphérique multifonction PCI consiste en deux noyaux de Contrôleur d’Hôtes UHCI pour signalisation pleine/faible vitesse et un noyau de Con-trôleur d’Hôtes EHCI pour signalisation haute vitesse
• Le hub racine consiste en 4 ports de face en aval avec émetteurs-récepteurs de couche physique intégrés partagés par le Contrôleur d’Hôte UHCI et EHCI
• Support des Spécifcations d’Interface de Gestion d’Alimentation de Bus PCI version 1.1
• Support hérité pour tous les ports face à l’aval.
Remarque: Certaines spécifcations matérielles et éléments de
logiciels peuvent être modifés sans avertissement.viii
Motherboard User’s Guide
Funktionen & Checkliste
Checkliste
Die Verpackung Ihres Motherboards enthält folgende Teile:• Motherboard
• Handbuch
• Bandkabel für Floppylaufwerke (optional)
• Bandkabel für IDE-Laufwerke
• Software -CD
Ausstattung
Unterstütz LGA Socket-775-Prozessoren
• Unterstützung für Intel Pentium 4-Prozessor mit “Hyper-Threading”-Tech-nologie
• Unterstützung von bis zu 800 MHz Front-Side Bus
“Hyper-Threading”-Technologie läßt das Betriebssystem glauben, es sei an zwei
Prozessoren angeschlossen, was zwei parallele Threads auf separaten ‘logischen’
Prozessoren im selben physischen Prozessor erlaubt.
Chipsatz
Dieser Chipsatz besteht aus einer Intel 865PE Northbridge und einer
Intel 82801EB I/O Controller Hub (ICH5). Die Chipsatzarchitektur ist in einem innovativen und skalierbaren Design gehalten und verspricht sowohl
Zuverlässigkeit als auch Leistungsstärke.
• Die AGP-Schnittstelle unterstützt 4X/8X AGPDatenübertragungen and 4X/8X
AGP Schnellschreibungen.
• 4 GB Unterstützung des Systemspeichers und eine maximale Bandbreite von
6.4 GB/s bei Benutzung von DDR400 im Doppelt-Kanal-Modus.
• Ein Ultra ATA 100 Controller ist integriert, zwei Serien ATA Host Controller, ein EHCI Host Controller, und vier UHCI Host Controller, welche acht externe
USB 2.0 Ports unterstützen.
• Die PCI Bus Schnittstelle unterstützt Spezifkationen von PCI Revision 2.3
• Integrierter LAN Controller: gemäß WfM 2.0 und IEEE802.3
• Integrierter Serien ATA Host Controller: Unabhängige DMA Operation and
Datenübertragungsrate bis zu 1.5 Gb/s (150 MB/s)
Speicherunterstützung
• Vier 184-pin DIMM Steckplätze für DDR SDRAMSpeichermodule
• Unterstützung für DDR400 Speicherbus
• Maximal auf 4GB Speicher erweiterbar
Erweiterungssteckplätze
• Ein CNR-Steckplatz
• Ein 8x/4xAGP-Steckplatz
• Fünf 32-Bit PCI-Steckplätze für PCI 2.3-kompatibles Businterface
Onboard IDE-Kanäle
• Zwei IDE-Header
• Unterstützt die Modi PIO (Programmable Input/Output) und DMA (Direct
Memory Access)ix
Motherboard User’s Guideiii
Motherboard User’s Guide
• Unterstützung für IDE Ultra DMA-Busmastering mit Transferraten von 33/66/
100 MB/Sek
Serial ATA
• Zwei Serial ATA Headers
• Datentransferrate übertrifft beste ATA-Werte (~150 MB/Sek.); höhere Transfer-raten möglich
• Low Pin Count (LPC) für Host und Geräte
AC’97 Codec
• 6-CH Hardware-Architektur erlaubt einen Multikanal south bridge für die 6CH
Tonwiedergabe
• Kompatibel mit Intel
?
AC’97 (REV. 2.3), gemäß Microsoft
?
PC2001 Richtlinien
• Eingebauter Kopfhörer-Puffer und interner PLL, letzterer spart das zusätzliche
Kristall.
• Line-in/rear out (hinterer Ausgang) benutzen die gleiche Buchse; Zentrum/
Bass benutzen die gleiche MIC Buchse
• Digitale S/PDIF OUT Unterstützung
• CRL
?
3D: BS3D kompatibler Audio Motor, basierend auf HRTF
Onboard-I/O-Ports
Das Motherboard verfügt über einen kompletten Satz von I/O-Schnittstellen und
Anschlüssen:• Zwei PS/2-Steckplätze für Maus und Tastatur
• Ein serieller Steckplatz
• Ein paralleler Steckplatz
• Maximal acht USB2.0-Ports (vier Ports auf der Rückseite; die Onboard-USB-
Header USB2/USB3 bieten vier zusätzliche USB-Ports).
• Audioanschlüsse für Mikrofon, line-in und line-out
IIntegriertes Ethernet LAN (optional)
• Onboard Gigabit LAN: - Integrierter 10/100/1000 Transceiver
- Selbstverhandlung mit “Next page”- (nächste Seite) Kapazität
- Unterstützt eine Full Duplex Flußkontrolle (IEEE 802.3x), und IEEE
802.1Q
VLAN-Markierung
- In Übereinstimmung mit IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Onboard 10/100Mbps Ethernet LAN:10 Mb/s und 100 Mb/s Betrieb
- Integrierter Fast Ethernet MAC, physikalischer Chip und Transceiver in
einem einzigen Chip
- Unterstützt 10Mb/s und 100Mb/s N-way Auto-Verhandlung
- Unterstüzt ACPI Versorgungs-Betriebssystem
- Fließende Full Duplex Kontrolle (IEEE 802.3x) und halbe/Full duplex
Kapazitätii
Motherboard User’s Guidex
Motherboard User’s Guide
USB2.0
• Entspricht Universal Serial Bus-Spezifkation, Revision 2.0
• Entspricht Intels Enhanced Host Controller Interface-Spezifkation, Revi -sion 0.95
• Entspricht Universal Host Controller Interface -Spezifkation Revision 1.1
• PCI-Multifunktionsgerät besteht aus zwei UHCI Host
Controller-Kernen für Signalübertragung bei voller und niedriger Ge-schwindigkeit sowie einem EHCI Host Controller-Kern für Hochgeschwin-digkeits- Signalübertragung
• Root Hub besteht aus 4 Downstream-Ports mit integrierten Physical
Layer-Überträgern für gemeinsame Nutzung durch UHCI und EHCI Host
Controller
• Unterstützt PCI-Bus Power Management Interface , Spezifkation Release
1.1
• Legacy-Unterstützung für alle Downstream-Ports
Hinweis:Bestimmte Hardwarespezifkationen und Teile der
softwareausstattung können ohne weitere Ankündigung
abgeändert werden.xi
Motherboard User’s Guide
Traduzione Funzioni e Lista
Lista
L’imballo della scheda madre é composto da:• La scheda madre
• Il manuale
• Una piattina per il collegamento dei drive (opzionale)
• Una piattina IDE
• Il CD con il Software di supporto
Caratteristiche
Dotata di LGA Socket 775 per Processori
• Supporta CPU Processori Intel Pentium serie 4 con tecnologia Hyper Thread-ing
• Supporta fno a 800 MHz Front Side Bus
La tecnologia Hyper-Threading permette al sistema operative di essere dotato di due procressori. Permettendovi di effettuare due operazioni in parallelo, entrambe su processori ‘logici’ separati all’interno dello stesso processore fsico.
Chipset
In accordo ad una archittettura scabile e innovative sono presenti nel chipset il
Northbridge Intel 865PE e Intel 82801EB I/O Controller Hub (ICH5).
• L’interfaccia AGP supporta il bus dati AGP 4X/8X e AGP Fast Writes 4X/8X.
• Supporto massimo pari a 4 GB di memoria di sistema ed una velocità di trasferimento dati massima pari a 6.4 GB/s utilizzando le DDR400 nella mo-dalità “dual-channel”.
• Nella scheda é integrato un controller Ultra ATA 100, due controller Host Serial
ATA, un controller host EHCI e quattro controller host UHCI per un supporto massimo di otto USB 2.0.
• Interfaccia PCI integrata: supporto delle specifche PCI Rev. 2.3
• Interfaccia LAN integrata: supporto delle specifche WfM 2.0 e IEEE802.3
• Controller Host Serial ATA intergrata: Operazioni DMA indipendente e trasferi-mento dati Massimo fno a 1.5 Gb/s (150 MB/s)
Memoria Supporta
• Quattro slot DIMM a 184 pin per moduli di memoria DDR SDRAM
• Supporta bus di memoria DDR400 MHz
• Quantità massima di memoria installabile, 4GB
Slot di espansione
• Una slot CNR
• Una slot AGP 8x4x
• Cinque slot PCI a 32 bit per interfaccia bus PCI 2.3
Canali IDE Integrati
• Due connettori IDE
• Supporto della modalità PIO (Programmable Input/Output) e DMA (Direct
Memory Access)
• Supporto per le modalità Bus Mastering e Ultra DMA ATA 33/66100 MB/secxii
Motherboard User’s Guideiii
Motherboard User’s Guide
ATA Seriale
• Due connettori Serial ATA
• Altissima velocità di trasferimento dati ATA (~150 MB/s) con la possibilità di scalabilità della velocità stessa verso valori piú alti
• Pin Count ridotto sia per l’host sia per le periferich
AC’97 Codec
• Architettura hardware 6-CH che permette l’utilizzo del “multi-channel south bridge” per la riproduzione 6CH
• Compatibilità con lo standard Intel
?
AC’97 (REV. 2.3) secondo i requisiti Mi-crosoft
?
PC2001
• Buffer cuffe integrato e PLL interno, l’ultimo eliminando la necessità di cristalli ulteriore
• MIC e Center/bass condividono lo stesso jack
• Supporto S/PDIF OUT Digitale
• CRL
?
3D: HRTF basata su un motore audio compatibile con lo standard BS3D
Onboard I/O Porte
La scheda madre è dotata da una serie completa di porte e connettori I/O:• Due porte PS/2 per tastiera e mouse
• Una porta seriale
• Una porta parallela
• Quantità massima otto porte USB2.0 (Quattro presenti nella parte posteriore, connettori USB integrati nella scheda madre per l’aggiunta di altre 4 porte
USB2/USB3)
• Jack audio per microfono, ingresso linea e uscita linea
Built-In Ethernet LAN (opzionale)
• LAN Gigabit integrata: - Transceiver 10/100/1000 Integrato
- Negoziazione automatica con capacità Next page
- Controllo fusso dati Full Duplex (IEEE 802.3x) e tagging VLAN IEEE
802.1Q
- Supporto degli standard IEEE 802.3, IEEE 802.3u e IEEE 802.3ab
• Onboard 10/100Mbps Ethernet LAN:Operazioni 10 Mb/s a 100 Mb/s
- Fast Ethernet MAC integrata, chip fsico e transceiver nello stesso chip
- Supporto della negoziazione automatica N-way a 10Mb/s e 100Mb/s
- Supporto di gestione del consumo energetico ACPI
- Controllo di fusso Full Duplex (IEEE 802.3x) e Half/Full
USB 2.0
• Conforme alle specifche Universal Serial Bus 2.0
• Conforme alle specifche Intel Enhanced Host Controller revisione 1.0
• Conforme alle specifche Universal Host Controller Interface revisione 1.1
• Il dispositivo PCI multifunzione consiste di due schede di controllo UHCI per lat rasmissione segnali pieno/basso e una scheda di controllo EHCI per la trasmissione segnali ad alta velocità.ii
Motherboard User’s Guidexiii
Motherboard User’s Guide
• Il porto hub di base consiste di 4 porte downstream con ricetrasmittenti inte-grati nel layer fsico condivisi dalla scheda di controllo interfaccia UHCI e EHCI
• Supporto per interfaccia risparmio energia bus PCI specifche release 1.1
• Supporto per tutte le porte downstream precedenti
Nota: Alcune specifche hardware ed elementi software sono soggetti
a variazioni senza preavviso.xiv
Motherboard User’s Guide
Traducción de Características & Lista
LISTA DE VERIFICACIÓN
El paquete de su placa principal contiene los sigtes. ítems:• La placa principal
• El Manual del Usuario
• Un cable cinta para el lector de disquete (optativo)
• Un cable cinta para el lector IDE
• CD de Software de soporte
Características
Soporte de Procesador LGA Socket-478
• Soporta Procesador de Intel Pentium 4 con la Tecnología Hyper Threading
• Soporta hasta Bus de Lado Frontal de 800 MHz
La tecnología “Hyper-Threading” habilita el sistema operativo en pensar que está conectado a dos procesadores, que permite dos hilos a correr en paralelo, ambos en procesadores ‘lógicos’ dentro del mismo procesador físico.
Chipset
Hay Intel 865PE Northbridge y Intel 82801EB I/O Controller Hub (ICH5) en este chipset en confomidad con una arquitectura innovadora y escalable con fabilidad y rendimiento comprobados.
• La interfaz AGP soporta la transferencia de datos de AGP 4X/8X y 4X/8X AGP
Fast Writes.
• Soporta 4 GB de memoria de sistema y tiene una ancha de banda máxima de
6.4 GB/s con DDR400 en el modo de canal dual.
• Integra un controlador Ultra ATA 100, dos controladores anftriones Serial ATA, un controlador anftrión EHCI, y cuatro controladores anftriones UHCI que soportan ocho puertos USB 2.0 externos.
• Interfaz de Bus PCI: soporta la especifcación PCI Revisión 2.3
• Controlador LAN Integrado: Conformidad de WfM 2.0 y IEEE802.3
• Controlador Anftrión Serial Integrado: Operación DMA independiente e Índice de Transferencia de Datos hasta 1.5 Gb/s (150 MB/s)
Soporte de Memoria
• Cuatro ranuras 184-pin DIMM para módulos de memoria DDR SDRAM
• Soporta DDR400 MHz
• Memoria máxima instalada es 4GB
Ranuras de Expansión
• Una ranura CNR
• Una ranura 8x/4xAGP
• Cinco ranuras 32-bit PCI para la interfaz de bus conforme con PCI 2.3
Canales IDE abordo
• Dos conectores IDE
• Soporta modos PIO (Entrada/Salida Programable/Programmable Input/
Output) y modos DMA (Acceso de Memoria Directo/Direct Memory Access).
• Soporta mastering de bus IDE Ultra DMA con índices de transferencia de
33/66/100 MB/segxv
Motherboard User’s Guideiii
Motherboard User’s Guide
ATA Serial
• Dos conectores Serial ATA
• Índice de transferencia que excede el mejor ATA (~150 MB/s) con escalabili-dad a índices superiores
• Cuenta de pin baja para ambos anftrión y dispositivos
AC’97 Codec
• Arquitectura de hardware 6-CH permite south bridge de multicanal para repro-ducir sonido 6CH
• Compatible con Intel
?
AC’97 (REV. 2.3), satisface los requisitos de Microsoft
?

PC2001
• Buffer de audífono incorporado y PLL interno, éste último ahorra el cristal adicional
• Line-in/salida trasera comparten la misma clavija; Centro/bajo comparten la clavija MIC
• Soporte S/PDIF OUT digital
• CRL
?
3D: HRTF basado del motor de sonido compatible con BS3D
Puertos I/O Abordos
La placa principal tiene un juego completo de puertos I/O y conectores:• Dos puertos PS/2 para ratón y teclado
• Un puerto serial
• Un puerto paralelo
• Máxima ocho puertos USB2.0 (cuatro puertos de panel trasero, conectores
USB abordo USB2/USB3 que provee cuatro puertos extras
• Clavijas de sonido para micrófono, entrada y salida de línea
Ethernet LAN Incorporado (optativo)
• Gigabit LAN Abordo: - Transreceptor 10/100/1000 integrado
- Auto-Negociación con capacidad Next page(Próxima página)
- Soporta control de fujo Full Duplex (IEEE 802.3x), y marcación IEEE
802.1Q VLAN
- Conformidad total con IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Onboard 10/100Mbps Ethernet LAN:Operación 10 Mb/s y 100 Mb/s
- Fast Ethernet MAC integrado, chip fìsico, y transceptor en un solo
chip
- Soporta N-way auto-negociación 10Mb/s y 100Mb/s
- Soporta administración de suministro ACPI
- Control de Flujo Full Duplex (IEEE 802.3x) y capacidad Medio/Full
duplex

USB2.0
• Conforme con la Especifcación de Bus Serial Universal Revisión 2.0
• Conforme con Controlador Anftrión Reforzado de Intel
Interface Specifcation Revision 0.95
• Conforme con la Especifcación de Interfaz de Controlador Anftrión Universal
Revisión 1.1ii
Motherboard User’s Guidexvi
Motherboard User’s Guide
• Dispositivo PCI multi-función se consiste de dos centros de Controlador
Anftrión UHCI para señalización de velocidad completa/baja y un centro de Controlador Anftrión EHCI para señalización de alta velocidaa
• Root hub consiste de 4 puertos que miran hacia abajo con transceptores de capa física integrado compartido por Controlador Anftrión UHCI y EHCI
• Soporta Especifcación de Interfaz de Administración de Energía de BUS
PCI versión 1.1
• Soporte de legado para todos los puetos que miran hacia abajo
Nota: Algunas especifcaciones de hardware e ítems de software
son sujetos a cambio sin aviso previo .xvii
Motherboard User’s Guide
Tradução da Lista & Características
Lista de verifcação
A embalagem da sua placa principal contém os seguintes itens:• A placa principal
• O Manual do Utilizador
• Um cabo para a unidade de disquetes (opcional)
• Um cabo para a unidade IDE
• CD de suporte para o software
Características
Suporte do Processador LGA Socket-775
• Suporta Processador série Intel Pentium 4 com Tecnologia Hyper Threading
• Suporta até 800 MHz Front-Side Bus
Tecnologia Hyper-Threading que permite o sistema operador a pensar que ele está conectado em dois processadores, fazendo com que duas tranças operem em paralelo, ambas em dois processadores “lógicos”separdos dentro do mesmo processador físico.
Chipset
Conta com Intel865PE Northbridge e Intel 82801EB I/O Controller Hub (ICH5) neste chipset, de acordo com uma arquitectura inovadora e escalável com um nível de confança e desempenho comprovado.
• O AGP interface suporta transferência de dados 4X/8X AGP e 4X/8X AGP
Fast Writes
• Suporta 4 GB de sistema de memória e possui um máximo de banda larga de
6.4 GB/s usando DDR400 no modo dual-channel.
• Integra um controlador Ultra ATA 100, dois controladores seriais host Serial
ATA, um controlador host EHCI, e quatro controladores host UHCI suportando oito portes USB 2.0 externos.
• PCI Bus Interface: suporta Especifcação PCI Revisão 2.3
• Controlador de LAN Intergrado: WfM 2.0 e IEEE802.3 Complacente
• Controlador de Host Serial ATA: Operação Independente DMA e Taxa de
Transferência de Dados até 1.5 Gb/s (150 MB/s)
Suporte de memória
• Quatro sockets DIMM com 184 pinos para módulos de memória DDR SDRAM
• Suporta bus de memória DDR400 MHz
• A memória máxima instalada é de 4GB
Slots de expansão
• Um slot CNR
• Um slot AGP 8x /4x
• Cinco slots PCI de 32 bit para interface bus compatível com PCI 2.3
Canais IDE na placa
• Dois conectores IDE
• Suporta modos PIO (Input/Output Programável) e DMA (Direct Memory Ac-cess)xviii
Motherboard User’s Guideiii
Motherboard User’s Guide
• Suporta IDE Ultra DMA bus mastering com razão de transferência de 33/66/
100 MB/seg
Série ATA
• Dois conectores Série ATA
• Razão de transferência excedendo o melhor ATA (~150 MB/s) com escalabili-dade para razões mais altas
• Contagem baixa de pin para ambos os dispositivos e host
AC’97 Codec
• Arquitetura 6-CH hardware permite que a ponte sul de canais múltiplos rea-presente o áudio 6CH
• Intel
®
AC’97 (REV. 2.3) compatível, de acordo com os requerimentos do
Microsoft
®
PC2001
• Buffer de fone de ouvido embutido e PLL interno, o último podendo salvar cristais adicionais
• Line-in/rear out usam a mesma tomada, Center/bass usam a mesma tomada de MIC
• Suporte Digital S/PDIF OUT
• CRL
®
3D: HRTF baseado em engenho BS3D áudio compatível
Portas I/O na placa
A placa principal possui um conjunto completo de portas e conectores I/O:• Duas portas PS/2 para o rato e teclado
• Uma porta série
• Uma porta paralela
• Máxima oito portes USB2.0 (quatro portes traseiros, conectores USB embuti-dos USB2/USB3 fornecendo quatro portes extras
• Jacks audio para microfone, line-in e line-out
Ethernet LAN Integrada (opcional)
• LAN Onboard Gigabit: - Transreceptor integrado 10/100/1000
- Auto-Negociação com capacidade Next page (Próxima página)
- Suporta controle de fuxo Full Duplex (IEEE 802.3x), e alongamento IEEE
802.1Q VLAN
- Totalmente complacente com IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
• Onboard 10/100Mbps Ethernet LAN:Operação 10 Mb/s e 100 Mb/s
- Fast Ethernet MAC integrado, chipe físico e transreceptor em um único
chipe
- Suporta auto-negociação N-way de 10Mb/s e 100Mb/s
- Suporta gerenciamento de força ACPI
- Controle de Fluxo Duplex Completo (IEEE 802.3x) e capacidade duplex
Half/Full (Parcial/Total)ii
Motherboard User’s Guidexix
Motherboard User’s Guide
USB 2.0
• Compatível com Universal Serial Bus Revisão 2.0 da especifcação
• Compatível com controlador Enhanced Host da Intel Revisão 0.95 da especifcação da interface
• Compatível com controlador Universal Host Revisão 1.1 da especif cação da Interface
• O dispositivo PCI muli-funções consiste em dois núcleos de Controlador
UHCI Host Controller para sinalização de velocidade total/baixa em um núcleo de Controlador EHCI Host para sinalização de alta velocidade
• O núcleo de raiz consiste em 4 portas de protecção a jusante com trans-receptores de camadas físicas integrados partilhados pelos controladores
Host UHCI e EHCI
• Suporte de gestão de energia PCI-Bus Revisão 1.1 da especifcação da interface
• Suporte para todas as portas de protecção a jusante
Nota: As especifcações de alguns artigos de hardware e
software encontram-se sujeitos a alterações sem aviso
prévio.xx
Motherboard User’s Guide
????????
???
????????????:·??
·????
·???????????(??)
·?? IDE ???????
·???? CD
??
?? LGA Socket-775 ???
· ????/?????? Intel Prescott/Pentium 4 ?????
· ?? 800 MHz????
“???”?????????????????????,?????????
?,???????????????“??”?????
???
?????Intel 865PE ?? ?Intel 82801EB I/O Controller Hub (ICH5), ???
????????????,????????????????
· AGP ???? 4X/8X AGP ????? 4X/8X AGP ?????
· ?? 4 GB ????,??????? DDR400 ???????? 6.4 GB/s?
· ?? Ultra ATA 100 ????2 ??? ATA ????1 ? EHCI ????4
??? 8 ??? USB 2.0 ??? UHCI ????
· PCI ????:?? PCI Revision 2.3 ???
· ?? LAN ???:?? WfM 2.0 ? IEEE802.3 ???
· ?? Serial ATA ???:?? DMA ??,???????? 1.5 Gb/s (150
MB/s)?
????
· 4??? DDR SDRAM ???? 184-pin DIMM ??
· ?? DDR400 ????
· ?????? 4GB
???
· 1 ? CNR ??
· 1 ? 8x/4x AGP ??
· 5 ? 32 ? PCI ??,?? PCI 2.3 ??????
Onboard IDE ??
· 2 ? IDE ??
· ?? PIO (????/??) ? DMA (???????) ??
· ?? IDE Ultra DMA ????,?????? 33/66/100 MB/secxxi
Motherboard User’s Guidei
Motherboard User’s Guide
Serial ATA
· 2 ?Serial ATA ??
· ?????? ATA (~150 MB/s),????????
· ??????????
AC’97 Codec
· 6-CH ????,????????? 6CH ??
· ?? Intel
?
AC’97 (REV. 2.3) ??,?? Microsoft
?
PC2001 ??
· ????????? PLL,??????????
· ??/??????????,??/???? MIC ??
· ???? S/PDIF OUT
· CRL
?
3D:??? HRTF ? BS3D ???????
?? I/O ??
???????? I/O ?????:·2 ??????????? PS/2 ??
·1 ???
·1 ???
·??8 ? USB2.0 ??(?????? 4 ???,?? USB ?? USB2/USB
3 ???? 4 ???)
·?????????????
????? LAN (??)
·?????? LAN: -?? 10/100/1000 ???
-?????????
-?????????? (IEEE 802.3x) ? IEEE 802.1Q VLAN ??
-???? IEEE 802.3?IEEE 802.3u?IEEE 802.3ab
·????10/100Mbps Ethernet LAN:·10 Mb/s ? 100 Mb/s ??
-??????????? MAC?????????
-?? 10Mb/s ? 100Mb/s N ????
-?? ACPI ????
-???????? (IEEE 802.3x) ????/?????
USB 2.0
·?????????? 2.0 ??
·?? Intel 1.0 ????????????
·?? 1.1 ????????????
·PCI ?????? 2 ?????/??????? UHCI ???? 1 ????
?????? EHCI ?????i
Motherboard User’s Guidexxii
Motherboard User’s Guide
·Root ????? 4 ?????,??? UHCI ? EHCI ???????
?????????
·?? 1.1 ??? PCI ??????????
·??????????
??:??????????????????????1
Chapter 1: Introduction
Chapter 1 Introduction
This motherboard has a LGA 775 Socket supporting Intel
Prescott/Pentium 4 with Hyper-Threading Technologyprocessors with Front-Side Bus (FSB) speeds up to 800 MHz.
Hyper-Threading Technology, designed to take advantage of themultitasking features in Windows XP , gives you the power to domore things at once.
This motherboard integrates the Intel 865PE Northbridge alongwith Intel 82801EB I/O Controller Hub (ICH5) that supportthe Serial ATA interface for high-performance and mainstreamdesktop PCs; the built-in USB 2.0 providing higher bandwidth,implementing Universal Serial Bus Specification Revision 2.0and is compliant with UHCI 1.1 and EHCI 1.0.
It supports AC’97 Audio Codec and provides Ultra DMA 33/
66/100 function. It has one 8x/4x AGP and five 32-bit PCI slots.
There is a full set of I/O ports including two PS/2 ports for mouseand keyboard, one serial port, one parallel port, one LAN port
(optional), three audio jacks for micropone, line-in and line-out,four back-panel USB 2.0 ports and onboard USB headers USB2/
USB3 providing four extra ports by connecting the extended USBmodule to the motherboard.
It features the Gigabit Ethernet interface that provides up to tentimes the throughput (10/100/1000 Mb/s operation) and fastertransfer rate (1 Gigabit/s) than conventional Ethernet connection.
It improves system availability, data security, user bandwidth andnetwork manageability.
It is an ATX motherboard and has power connectors for an ATXpower supply. It is also certified by WHQL (Windows Hardware
Quality Labs) that ensures you the hardware and drivers compat-ibility with Windows operating systems.2
Motherboard User’s Guide
Note: You must initiate the HT CPU function through BIOS setup. It isstrongly recommended you refer to Page 40 for relative details.
Key Features
The key features of this motherboard include:LGA 775 Socket Processor Support
• Supports Intel Prescott/Pentium 4 Series processorswith Hyper-Threading Technology
• Supports up to 800 MHz Front-Side Bus
Hyper-Threading technology enables the operating systeminto thinking it’s hooked up to two processors, allowing twothreads to be run in parallel, both on separate ‘logical’processors within the same physical processor.
Chipset
There are Intel 865PE Northbridge and Intel 82801EB I/O
Controller Hub (ICH5) in the chipsets in accordance with aninnovative and scalable architecture with proven reliability andperformance.
• The AGP interface supports 4X/8X AGP data transfers and
4X/8X AGP Fast Writes.
• Supports 4 GB of system memory and has a maximumbandwidth of 6.4 GB/s using DDR400 in dual-channelmode.
• Integrates an Ultra ATA 100 controller, two Serial ATA hostcontrollers, one EHCI host controller, and four UHCI hostcontrollers supporting eight external USB 2.0 ports.
• PCI Bus Interface: supports PCI Revision 2.3 Specification
• Integrated LAN Controller: WfM 2.0 and IEEE802.3
Compliant
• Integrated Serial ATA Host Controller: Independent DMAoperation and Data Transfer Rate up to 1.5Gb/s(150MB/s)3
Chapter 1: Introduction
Memory Support
• Four 184-pin DIMM sockets for DDR SDRAM memorymodules
• Supports DDR400 memory bus
• Maximum installed memory is 4GB
Expansion Slots
• One CNR slot
• One 8x/4x AGP slot
• Five 32-bit PCI slots for PCI 2.3-compliant bus interface
Onboard IDE channels
• Two IDE Connectors
• Supports PIO (Programmable Input/Output) and DMA
(Direct Memory Access) modes
• Supports IDE Ultra DMA bus mastering with transfer ratesof 33/66/100 MB/sec
Serial ATA
• Two Serial ATA Connectors
• Transfer rate exceeding best ATA (~150 MB/s) withscalability to higher rates
• Low pin count for both host and devices
AC’97 Codec
• 6-CH hardware architecture allows multi-channel southbridge to playback 6CH audio
• Intel
® AC’97 (REV . 2.3) compatible, meeting Microsoft
® PC2001 requirements
• Built-in earphone buffer and internal PLL, the latter savingadditional crystal
• Line-in/rear out share the same jack; Center/bass share the
MIC jack
• Digital S/PDIF OUT Support
• CRL
® 3D: HRTF based BS3D compatible audio engine4
Motherboard User’s Guide
Onboard I/O Ports
The motherboard has a full set of I/O ports and connectors:• Two PS/2 ports for mouse and keyboard
• One serial port
• One parallel port
• One LAN port (optional)
• Four back-panel USB2.0 ports
• Audio jacks for microphone, line-in and line-out
Fast Ethernet LAN (optional)
• Onboard Gigabit LAN:--Integrated 10/100/1000 transceiver
--Auto-Negotiation with Next page capability
--Supports Full Duplex flow control (IEEE 802.3x), and
IEEE 802.1Q VLAN tagging
--Fully compliant with IEEE 802.3, IEEE 802.3u, IEEE
802.3ab
• Onboard 10/100Mbps Ethernet LAN:--10 Mb/s and 100 Mb/s operation
--Integrated Fast Ethernet MAC, physical chip, andtransceiver onto a single chip
--Supports 10Mb/s and 100Mb/s N-way auto-negotiation
--Support ACPI power management
-- Full Duplex Flow Control (IEEE 802.3x) and Half/Fullduplex capability
USB 2.0
• Compliant with Universal Serial Bus Specification Revision
2.0
• Compliant with Intel’s Enhanced Host Controller Interface
Specification Revision 1.0
• Compliant with Universal Host Controller Interface Specifi-cation Revision 1.15
Chapter 1: Introduction
• PCI multi-function device consists of two UHCI Host
Controller cores for full-/low-speed signaling and one
EHCI Host Controller core for high-speed signaling
• Root hub consists 4 downstream facing ports with inte-grated physical layer transceivers shared by UHCI and
EHCI Host Controller, up to eight functional ports
• Support PCI-Bus Power Management Interface Specifica-tion release 1.1
• Legacy support for all downstream facing ports
BIOS Firmware
This motherboard uses AMI BIOS that enables users to configuremany system features including the following:• Power management
• Wake-up alarms
• CPU parameters and memory timing
• CPU and memory timing
The firmware can also be used to set parameters for differentprocessor clock speeds.
Bundled Software
• Adobe Acrobat Reader is the software to help users read
PDF files.
• ShowShifter provides you with various options to create anultimate home media center for your PC that you can use itto record and playback TV, enjoy your entertainment over anetwork, look at digital photos as a slide show on your TVor PC monitor, and so on
• WinDVD creator Plus is a storyboard interface makingthe entire DVD-making process as easy as moving picturesaround on your screen.
• WinDVD provides the automatic WinDVD softwareinstallation.6
Motherboard User’s Guide
Dimensions
• ATX form factor of 305 x 244 mm
Note: Hardware specifications and software items aresubject to change without notification.
Package Contents
Y our motherboard package ships with the following items:• The motherboard
• The User’s Guide
• One diskette drive ribbon cable (optional)
• One IDE drive ribbon cable
• The Software support CD
Optional Accessories
You can purchase the following optional accessories for thismotherboard.
• The Extended USB module
• The CNR v.90 56K Fax/Modem card
• The Serial ATA cable
Note: You can purchase your own optional accessories from thethird party, but please contact your local vendor on any issuesof the specification and compatibility.7
Chapter 2: Motherboard Installation
Chapter 2 Motherboard Installation
To install this motherboard in a system, please follow theseinstructions in this chapter:• Identify the motherboard components
• Install a CPU
• Install one or more system memory modules
• Make sure all jumpers and switches are set correctly
• Install this motherboard in a system chassis (case)
• Connect any extension brackets or cables to headers/connectors on the motherboard
• Install peripheral devices and make the appropriate connec-tions to headers/connectors on the motherboard
Note:1. Before installing this motherboard, make sure jumper JP1is under Normal setting. See this chapter for informationabout locating JP1 and the setting options.
2. Never connect power to the system during installation;otherwise, it may damage the motherboard.8
Motherboard User’s Guide
LABEL COMPONENTS
DIMM1--4 Four 184-pin DDR SDRAM sockets
IDE1/2 Primary/Secondary IDE connectors
ATX3 Standard 4-Pin ATX Power connector
ATX2 Standard 20-Pin ATX Power connector
USB2/3 Front Panel USB headers
FLOPPY Floppy Disk Drive connector
PANEL1 Front Panel Switch/LED header
SYSFAN System Fan connector
JP1 Clear CMOS jumper
JPX Performance Mode jumper
SPK1 Speaker header
Motherboard Components
SYSFAN USB2/3 PCI PANEL1 SPK1
LGA 775 Socket
CPU
FAN
ATX2
FLOPPY
DDR
IDE
JP1
SATA
CNR1
AUDIO2
CD1
AGP1
AT X 3
IO
PORTS
JPX
PWRFAN
IR19
Chapter 2: Motherboard Installation
PS/2 Mouse
PS/2 Keyboard
Parallel Port (LPT1)
Serial Port COM1
LAN Port (optional)
USB Ports
Audio Ports
Use the upper PS/2 port to connect a PS/2pointing device.
Use the lower PS/2 port to connect a PS/2keyboard.
Use the Parallel port to connect printers orother parallel communications devices.
Use the COM port to connect serial devicessuch as mice or fax/modems. COM1 isidentified by the system as COM1.
Connect an RJ-45 jack to the LAN port toconnect your computer to the Network.
Use the USB ports to connect USB devices.
Use the three audio ports to connect audiodevices. The first jack is for stereo Line-Insignal. The second jack is for stereo Line-Outsignal. The third jack is for Microphone.
I/O Ports
The illustration below shows a side view of the built-in I/O portson the motherboard.
LABEL COMPONENTS
IR1 Infrared header
SATA1/2 Serial ATA connectors
PCI 1-5 32-bit PCI slots
CD1 Analog Audio Input header
AUDIO2 Front Panel Audio header
CPUFAN CPU Fan connector
PWRFAN Power Fan connector
CNR1 Communications Networking Riser slot
AGP1 Accelerated Graphics Port slot
Microphone
USBports
USBports
Serial Port
COM1
PS2
Keyboard
(Optional)
LAN port
Line-In
Line-Out
Parallel Port (LPT1)
PS2 Mouse10
Motherboard User’s Guide
Installing the Processor
This motherboard has a LGA 775 processor socket. Whenchoosing a processor, consider the performance requirements ofthe system. Performance is based on the processor design, theclock speed and system bus frequency of the processor, and thequantity of internal cache memory and external cache memory.
CPU Installation Procedure
Follow these instructions to install the CPU:LGA 775 Socket
1
CPUFANpin1
A. Unload the cap
• Use thumb & forefinger to holdthe lifted tab of the cap.
• Lift the cap up and pick the capcompletely from the socket.
B. Open the load plate
• Use thumb & forefinger to holdthe hook of the lever and sidepull the lever to unlock it.
• Lift up the level.11
Chapter 2: Motherboard Installation
• Use thumb to open the load plate. Be careful not to touchthe contacts.
C. Install the CPU on the socket
• Orientate CPU package to the socket. Make sure youmatch triangle marker to pin 1 location.
D. Close the load plate
• Close the load plate, and slightpush down of the load plate onthe tongue side.
• CPU is locked completely.
Installing Memory Modules
This motherboard accommodates four 184-pin 2.5V DIMMsockets (Dual Inline Memory Module) for unbuffered DDR400memory modules (Double Data Rate SDRAM), and maximum
4.0 GB installed memory. DDR SDRAM is a type of SDRAMthat supports data transfers on both edges of each clock cycle
(the rising and falling edges), effectively doubling the memorychip’s data throughput. DDR DIMMs can synchronously workwith 266/333/400 MHz memory bus. DDR SDRAM provides 2.1
GB/s, 2.7 GB/s or 3.2 GB/s data transfer rate when the bus is 133
MHz, 166 MHz or 200 MHz, respectively. It supports Dual
Channel Technology; when activating it, the bandwidth of memorybus will be doubled to 6.4 GB/s and frequency 200 MHz.
DIMM1--412
Motherboard User’s Guide
Memory Module Installation Procedure
These modules can be installed with up to 4 GB system memory.
Refer to the following to install the memory module.
1. Push down the latches on both sides of the DIMMsocket.
2. Align the memory module with the socket. There is anotch on the DIMM socket that you can install the
DIMM module in the correct direction. Match the cutouton the DIMM module with the notch on the DIMMsocket.
3. Install the DIMM module into the socket and press itfirmly down until it is seated correctly. The socket latchesare levered upwards and latch on to the edges of the
DIMM.
4. Install any remaining DIMM modules.13
Chapter 2: Motherboard Installation
Jumper Settings
Connecting two pins with a jumper cap is SHORT; removing ajumper cap from these pins, OPEN.
JPX: Performance Mode Jumper
Use this jumper to enable the function of Performance Accelera-tion Technology. Please be noted enabling this jumper (Open Pins
1-2) perhaps comes with some risks that we do not guarrantee thesystem stability.
JP1: Clear CMOS Jumper
Use this jumper to clear the contents of the CMOS memory. Youmay need to clear the CMOS memory if the settings in the Setup
Utility are incorrect and prevent your motherboard from operating.
To clear the CMOS memory, disconnect all the power cables fromthe motherboard and then move the jumper cap into the CLEARsetting for a few seconds.
Function Jumper Setting
Normal Short Pins 1-2
Clear CMOS Short Pins 2-3
Function Jumper Setting
Disabled Short Pins 1-2
Enabled Open Pins 1-2 (Default)
JP1
1
JPX
114
Motherboard User’s Guide
Connect the power connector from the power supply to the ATX2connector on the motherboard. The ATX3 is a +12V connectorfor CPU Vcore power.
If there is a cooling fan installed in the system chassis, connect thecable from the cooling fan to the SYSFAN fan power connectoron the motherboard.
Connect the auxiliary power supply cooling fan connector to
PWRFAN.
Install the Motherboard
Install the motherboard in a system chassis (case). The board isan A TX size motherboard. You can install this motherboard in an
ATX case. Make sure your case has an I/O cover plate matchingthe ports on this motherboard.
Install the motherboard in a case. Follow the case manufacturer’sinstructions to use the hardware and internal mounting points onthe chassis.
ATX2
1
PWRFAN
ATX3
1
PANEL1
1 SYSFAN15
Chapter 2: Motherboard Installation
Connecting Optional Devices
Refer to the following for information on connecting themotherboard’s optional devices:SPK1: Speaker Header
Connect the cable from the PC speaker to the SPK1 header onthe motherboard.
Pin Signal Pin Signal
1 HD_LED_P(+) 2 FP PWR/SLP(+)
3 HD_LED_N(-) 4 FP PWR/SLP(-)
5 RESET_SW_N(-) 6 POWER_SW_P(+)
7 RESET_SW_P(+) 8 POWER_SW_N(-)
9 RSVD_DNU 10 KEY
Pin Signal Pin Signal
1 SPKR 2 NC
3 GND 4 +5V
Connect the case switches and indicator LEDs to the PANEL1header. Please refer to the following list of the PANEL1 pinassignments.
1
SPK1
AUDIO2
1
1
IR1
USB3 USB2
1116
Motherboard User’s Guide
USB2/USB3: Front Panel USB Header
The motherboard has USB ports installed on the rear edge I/Oport array. Additionally, some computer cases have USB ports atthe front of the case. If you have this kind of case, use auxiliary
USB headers USB2/USB3 to connect the front-mounted ports tothe motherboard.
1. Locate the USB2/USB3 header on the motherboard.
2. Plug the bracket cable onto the USB2/USB3 header.
3. Remove a slot cover from one of the expansion slots onthe system chassis. Install an extension bracket in theopening. Secure the extension bracket to the chassis witha screw.
AUDIO2: Front Panel Audio Header
This header allows the user to install auxiliary front-orientedmicrophone and line-out ports for easier access.
Pin Signal Pin Signal
1 AUD_MIC 2 AUD_GND
3 AUD_MIC_BIAS 4 AUD_VCC
5 AUD_FPOUT_R 6 AUD_RET_R
7 HP_ON 8 KEY
9 AUD_FPOUT_L 10 AUD_RET_L
Pin Signal Pin Signal
1 VERG_FP_USBPWR0 2 VERG_FP_USBPWR0
3 USB_FP_P0(-) 4 USB_FP_P1(-)
5 USB_FP_P0(+) 6 USB_FP_P1(+)
7 GROUND 8 GROUND
9 KEY 10 USB_FP_OC017
Chapter 2: Motherboard Installation
IR1: Infrared Header
The infrared port allows the wireless exchange of informationbetween your computer and similarly equipped devices such asprinters, laptops, Personal Digital Assistants (PDAs), and othercomputers.
1. Locate the infrared port-IR1 header on the motherboard.
2. If you are adding an infrared port, connect the ribboncable from the port to the IR1 header and then secure theport to an appropriate place in your system chassis.
Pin Signal Pin Signal
1 NC 2 KEY
3 +5V 4 GND
5 IRTX 6 IRRX
Install Other Devices
Install and connect any other devices in the system following thesteps below.
11
FLOPPY
1
IDE1 IDE2
SATA1
SATA218
Motherboard User’s Guide
Floppy Disk Drive
The motherboard ships with a floppy disk drive cable that cansupport one or two drives. Drives can be 3.5" or 5.25" wide, withcapacities of 360K, 720K, 1.2MB, 1.44MB, or 2.88MB.
Install your drives and connect power from the system powersupply. Use the cable provided to connect the drives to the floppydisk drive connector FLOPPY.
IDE Devices
IDE devices include hard disk drives, high-density diskette drives,and CD-ROM or DVD-ROM drives, among others.
The motherboard ships with an IDE cable that can support one ortwo IDE devices. If you connect two devices to a single cable,you must configure one of the drives as Master and one of thedrives as Slave. The documentation of the IDE device will tell youhow to configure the device as a Master or Slave device. The
Master device connects to the end of the cable.
Install the device(s) and connect power from the system powersupply. Use the cable provided to connect the device(s) to the
Primary IDE channel connector IDE1 on the motherboard.
If you want to install more IDE devices, you can purchase asecond IDE cable and connect one or two devices to the Second-ary IDE channel connector IDE2 on the motherboard. If youhave two devices on the cable, one must be Master and one mustbe Slave.19
Chapter 2: Motherboard Installation
Serial ATA Devices
The Serial ATA (Advanced Technology Attachment) is thestandard interface for the IDE hard drives, which is designed toovercome the design limitations while enabling the storage inter-face to scale with the growing media rate demands of PC plat-forms. It provides you a faster transfer rate of 150 MB/s. If youhave installed a Serial ATA hard drive, you can connect the Serial
ATA cables to the Serial ATA hard drive or the connecter on themotherboard.
On the motherboard, locate the Serial ATA connectors SATA1/2,which support new Serial ATA devices for the highest datatransfer rates, simpler disk drive cabling and easier PC assembly.
It eliminates limitations of the current Parallel ATA interface, butmaintains register compatibility and software compatibility with
Parallel A TA.
Analog Audio Input Header
If you have installed a CD-ROM drive or DVD-ROM drive, youcan connect the drive audio cable to the onboard sound system.
CD1
120
Motherboard User’s Guide
When you first start up your system, the BIOS should automati-cally detect your CD-ROM/DVD drive. If it doesn’t, enter the
Setup Utility and configure the CD-ROM/DVD drive that youhave installed. On the motherboard, locate the 4-pin header CD1.
Expansion Slots
This motherboard has one AGP, one CNR and five 32-bit PCIslots.
Pin Signal
1 CD IN L
2 GND
3 GND
4 CD IN R
AGP1
PCI1
PCI2
PCI3
PCI4
PCI5
CNR121
Chapter 2: Motherboard Installation
Follow the steps below to install an AGP/CNR/PCI expansioncard.
1. Locate the AGP, CNR or PCI slots on the motherboard.
2. Remove the blanking plate of the slot from the systemchassis.
3. Install the edge connector of the expansion card into theslot. Ensure the edge connector is correctly seated in theslot.
4. Secure the metal bracket of the card to the systemchassis with a screw.
8x/4x AGP Slot
You can install a graphics adapter that supports the 8x/4x AGPspecification and has a 8x AGP edge connector in the AGP slot.
CNR Slot
You can install the CNR (Communications and Networking Riser)cards in this slot, including LAN, Modem, and Audio functions.
PCI Slots
You can install the 32-bit PCI interface expansion cards in theslots.22
Motherboard User’s Guide
Chapter 3 BIOS Setup Utility
Introduction
The BIOS Setup Utility records settings and information of yourcomputer, such as date and time, the type of hardware installed,and various configuration settings. Y our computer applies theinformation to initialize all the components when booting up andbasic functions of coordination between system components.
If the Setup Utility configuration is incorrect, it may cause thesystem to malfunction. It can even stop your computer bootingproperly. If it happens, you can use the clear CMOS jumper toclear the CMOS memory which has stored the configurationinformation; or you can hold down the Page Up key whilerebooting your computer. Holding down the Page Up key alsoclears the setup information.
You can run the setup utility and manually change the configura-tion. You might need to do this to configure some hardwareinstalled in or connected to the motherboard, such as the CPU,system memory, disk drives, etc.23
Chapter 3: BIOS Setup Utility
Running the Setup Utility
Every time you start your computer, a message appears on thescreen before the operating system loading that prompts you to
“Hit if you want to run SETUP”. Whenever you seethis message, press the Delete key, and the Main menu page ofthe Setup Utility appears on your monitor.
You can use cursor arrow keys to highlight anyone of options onthe main menu page. Press Enter to select the highlighted option.
Press the Escape key to leave the setup utility. Press +/-/ tomodify the selected field’s values.
Some options on the main menu page lead to tables of items withinstalled values that you can use cursor arrow keys to highlightone item, and press PgUp and PgDn keys to cycle throughalternative values of that item. The other options on the mainmenu page lead to dialog boxes requiring your answer Yes or Noby hitting the Y or N keys.
If you have already changed the setup utility, press F10 to savethose changes and exit the utility. Press F1 to display a screendescribing all key functions. Press F9 to install the setup utilitywith a set of default values. Press F8 to install the setup utilitywith a set of high-performance values.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc
Standard CMOS Setup
Advanced Setup
Features Setup
Power Management Setup
PCI / Plug and Play Setup
BIOS Security Features
CPU PnP Setup
Hardware Monitor
Load Best Performance Settings
Load Optimal Defaults
Save Changes and Exit
Discard Changes and Exit
Standards COMOS setup for changing time, date, hard disk type, etc.
V02.54 (C) 1985-2003, American Megatrends, Inc.: Move +/-/: Value Enter: Select F1: General Help Esc: Exit
F8: Best Performance Settings F9: Optimized Settings F10: Save24
Motherboard User’s Guide
Standard CMOS Setup Page
This page displays a table of items defining basic informationabout your system.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Standard CMOS Setup
Date & Time
These items set up system date and time.
IDE Pri Master/Pri Slave/Sec Master/Sec Slave
Use these items to configure devices connected to the Primaryand Secondary IDE channels. To configure an IDE hard diskdrive, choose Auto. If the Auto setting fails to find a hard diskdrive, set it to User, and then fill in the hard disk characteristics
(Size, Cyls, etc.) manually. If you have a CD-ROM drive,select the setting CDROM. If you have an ATAPI device withremovable media (e.g. a ZIP drive or an LS-120), select
Floptical.
S-ATA0/1 Master
These items configure devices connected to the Serial ATAchannels. To configure a S-ATA hard disk drive, choose Auto.: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
System Time 00:01:25
System Date Thu 05/06/2004
Primary IDE Master Hard Disk
Primary IDE Slave Not Detected
Secondary IDE Master Not Detected
Secondary IDE Slave ATAPI CDROM
S-ATA0 Master Not Decteted
S-ATA1 Master Not Detected

Floppy A 1.44 MB 3 1/2”
Floppy B Disabled
Help Item
User [Enter], [TAB] or
[SHIFT-TAB] to select afield.
Use [+] or [-] to configuresystem time.25
Chapter 3: BIOS Setup Utility
Floppy A/B
These items set up size and capacity of the floppy diskettedrive(s) installed in the system.
Advanced Setup Page
This page sets up more advanced information about your system.
Handle this page with caution. Any changes can affect theoperation of your computer.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Advanced Setup
Quick Boot Enabled
1st
Boot Device PM-ST320410A
2nd
Boot Device SS-CD-ROM 52X/AKH
3rd
Boot Device 1st
Floppy Drive
Try Other Boot Device Yes
Bootup Num-Lock On
Boot To OS/2 > 64MB No
Graphic Win Size 64MB
Configure DRAM Timing by SPD Enabled
Hyper Threading Function Disabled
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
Quick Boot
If you enable this item, the system starts up more quickly beelimination some of the power on test routines.
1st
Boot Device/2nd
Boot Device/3rd
Boot Device
Use these items to determine the device order the computeruses to look for an operating system to load at start-up time.
Try Other Boot Device
If you enable this item, the system will also search for otherboot devices if it fails to find an operating system from the firsttwo locations.
Help Item
Allows BIOS to skip certaintests while booting. Thiswill decrease the timeneeded to boot the system.: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults26
Motherboard User’s Guide
BootUp Num-Lock
This item determines if the Num Lock key is active orinactive at system start-up time.
Boot to OS/2 > 64MB
Enable this item if you are booting the OS/2 operating systemand you have more than 64MB of system memory installed.
Graphic Win Size
This item defines the size of aperture if you use a graphicadapter.
Configure DRAM Timing By SPD
This item allows you to enable or disable the DRAM timingdefined by the Serial Presence Detect electrical.
Hyper Threading Function
You can set “Disabled” or “Enabled” to control HT CPUsupport in O.S. Set “Enabled” to test HT CPU function.
Auto detect DIMM/PCI Clock
When this item is enabled, BIOS will disable the clock signalof free DIMM/PCI slots.
Spread Spectrum
If you enable spread spectrum, it can significantly reduce the
EMI (Electro-Magnetic Interference) generated by thesystem.27
Chapter 3: BIOS Setup Utility
Features Setup Page
This page sets up some parameters for peripheral devicesconnected to the system.
OnBoard Floppy Controller
Use this item to enable or disable the onboard floppy disk driveinterface.
Serial Port1 Address
Use this item to enable or disable the onboard COM1/2 serialport, and to assign a port address.
OnBoard IR Port
Use this item to enable or disable the onboard infrared port, andto assign a port address.
Parallel Port Address
Use this item to enable or disable the onboard Parallel port, andto assign a port address.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Features Setup
OnBoard Floppy Controller Enabled
Serial Port1 Address 3F8/IRQ4
OnBoard IR Port Disabled
Parallel Port Address 378
Parallel Port Mode ECP
ECP Mode DMA Channel DMA3
Parallel Port IRQ IRQ7
OnBoard PCI IDE Controller Both
Audio Device Enabled
Ethernet Device Enabled
MODEM Device Auto
OnBoard USB Function Enabled
USB Function for DOS Disabled
USB 2.0 Controller Enabled
*****On-Chip Serial ATA Setting*****
On-Chip Serial ATA Enhanced Mode
Serial ATA Port0/1 Mode P0-3rd/P1-4th
Help Item
Allows BIOS to
Enable or Disable
Floppy Controller.: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults28
Motherboard User’s Guide
Parallel Port Mode
This item decides the parallel port mode. You can select Normal,
Bi-Directional, EPP (Enhanced Parallel Port), or ECP (Extended
Capabilities Port).
ECP Mode DMA Channel
This item assigns a DMA channel to the parallel port. The optionsare DMA0, DMA1 and DMA3.
Parallel Port IRQ
This item assigns either IRQ 5 or 7 to the parallel port.
OnBoard PCI IDE Controller
Use this item to enable or disable either or both of the onboard
Primary and Secondary IDE channels. There are four options:Disabled, Primary, Secondary and Both.
Audio Device
This item enables or disables the AC’97 audio chip.
Ethernet Device
This item enables or disables the onboard Ethernet LAN.
MODEM Device
This item enables or disables the onboard Modem.
OnBoard USB Function
Enable this item if you plan to use the USB ports on thismotherboard.
USB Function For DOS
Enable this item if you plan to use the USB ports on thismotherboard in a DOS environment.
On-Chip Serial ATA
Use this item to disable or enable the S-ATA and IDE devices:29
Chapter 3: BIOS Setup Utility
Serial ATA Port0/1 Mode
Use this item to decide the sequence of the Serial ATA devices.
Power Management Setup Page
This page sets some parameters for system power managementoperation.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
Power Management Setup
ACPI Aware O/S Yes
Power Management Enabled
Suspend Mode S1
Suspend Time Out Disabled
Resume On RTC Alarm Disabled
LAN/Ring Power On Disabled
Keyboard Power On Disabled
Help Item
Yes / No
ACPI support for
Operating System.
Yes: If OS supports
ACPI.
No: If OS does notsupport ACPI.: Move Enter: Select +/-/: Value F10: Save Esc: Exit
F1: General Help F9: Optimized Defaults
Primary: 2 IDE Drives
Secondary: 2 IDE Drives
S-ATA: 2 S-ATA Drives
Disabled Disabled S-ATA Controller
Option Function
Enhanced
Mode
SATA Only Only support SATA mode
Combine Mode
Primary: 2 IDE Drives
S-ATA: 2 S-ATA Drives30
Motherboard User’s Guide
ACPI Aware O/S
This item supports ACPI (Advanced Configuration and Powermanagement Interface). Use this item to enable or disable the
ACPI feature.
Power Management
Use this item to enable or disable a power managementscheme. If you enable power management, you can use theitems below to set the power management operation. Both
APM and ACPI are supported.
Suspend Mode
This item selects the status S1(Stop Clock) or S3(Suspend to
RAM) when the system enters the power-saving Suspendmode.
Suspend Time Out
This sets the timeout for Suspend mode in minutes. If the timeselected passes without any system activity, the computer willenter power-saving Suspend mode.
Resume On RTC Alarm / Date / Hour / Minute / Second
The system can be turned off with a software command. If youenable this item, the system can automatically resume at a fixedtime based on the system’s RTC (realtime clock). Use the itemsbelow this one to set the date and time of the wake-up alarm. Youmust use an ATX power supply in order to use this feature.
LAN/Ring Power On
The system can be turned off with a software command. If youenable this item, the system can automatically resume if there isan incoming call on the Modem/Ring, or traffic on the networkadapter. You must use an ATX power supply in order to use thisfeature.31
Chapter 3: BIOS Setup Utility
Keyboard Power On
If you enable this item, system can automatically resume bypressing any keys, hot or power key on the keyboard or typing inthe password. You must use an ATX power supply in order to usethis feature.
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCIor the AGP bus. The default AGP setting still lets the onboarddisplay work and allows the use of a second display cardinstalled in an PCI slot.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGAgraphics system. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. Werecommend you to leave this item at the default value.
PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the
PCI bus and those utilizing the system plug and play capability.
CMOS SETUP UTILITY – Copyright (C) 1985-2003, American Megatrends, Inc.
PCI / Plug and Play Setup
Primary Graphics Adapter AGP
Allocate IRQ to PCI VGA Yes
PCI IDE BusMaster Disabled
Help Item
Select whichgraphics controllerto use as

TXT / PDF

Available 7 files for T16 (V1.0C) View all >
HelpDrivers Since March 2000