Foxconn 761MX Download Drivers, Utilities, Manual and BIOS

Fix system halt at 94h with USB disk when USB item being disabled

FOX LiveUpdate

FOX ONE

SiS RAID Driver

SiS 191/190 PCI Gigabit high speed Ethernet Adapter
for NDIS Driver

(1) Introduction
----------------------------------------
These driver programs comply with Microsoft's NDIS v2.0.1
specification.

(2) Rrelease Version
----------------------------------------
sis190.dos : v0.43

(3) Optional Parameters
----------------------------------------

MeDIATYPE - This parameter specifies the media type currently used.
If MeDIATYPE does not specified, it will auto detect the
media type.

Parameters List:
AUTO -- Auto-select media type.
UTP -- 10BaseT half duplex mode.
UTPFULL -- 10BaseT full duplex mode.
FAST -- 100BaseT half duplex mode.
FASTFULL -- 100BaseT full duplex mode.

========================
----------------------------------------
SiS19x PXE BootROM v1.3
----------------------------------------
(1)BootROM types :

for SiS191 --- (SiS965, SiS966, SiS968)
191pxe.18 -- SiS191 BootRom Hook Int18
191pxe.19 -- SiS191 BootRom Hook Int19
191pxe.BEV -- SiS191 BootRom use BEV

for SiS190 --- (SiS965L, SiS966L, SiS968L)
190pxe.18 -- SiS190 BootRom Hook Int18
190pxe.19 -- SiS190 BootRom Hook Int19
190pxe.BEV -- SiS190 BootRom use BEV
PS : Load MAC address from APC or EEPROM supported.

Overview
----------------------------------------
SiS VGA software package consists of VGA drivers, utilities and Installation/Uninstallation programs for Windows 98/Me/2000/XP.
The installation/uninstallation programs are capable of installing/uninstalling VGA drivers and utilities respectively.
ur utilities consist of utility manager, driver mode setting utility, gamma correction utility, video setting utility,
TV output setting utility, center screen for TV, product and file information utility, utility tray, and hotkey define utility.
Objective
----------------------------------------
The objective of this document is to introduce all utilities in our VGA package applications for Windows 98/Me/2000/XP briefly and
give users a common view upon our VGA utilities.
Utility Introduction
----------------------------------------
(1) Utility manager:
It acts as an entrance for users to enter all SiS utilities. Users can move the mouse upon an animation utility button shown in
utility manager and press it to invoke the specified utility dialog.

(2) Driver mode setting:
It provides users to change display state, including driver mode, output device and resolution.

(3) Gamma correction:
It provides users to adjust the screen color TINT, the tint range from blue to red, according the preference of the users.

(4) Video setting:
It provides users to adjust the hue, saturation, contrast, and brightness of video display.

(5) TV output setting:
It provides users to adjust the TV screen position and TV filter.

(6) Center screen for TV:
It provides users to adjust display boundary on TV system.

(7) Product and file information:
It is aimed to list out the product information and the related files information included in the VGA package.

(8) Hotkey define:
It provides friendly ways for users to define hotkeys associated with specified functions of "OSD" or "3D Stereo".
Installation
----
(1) Generic install
Go to the software package directory, double click "setup.exe" icon.

(2) Silence install
Need under the DOS prompt, change directory to the software package path.
Type "setup -s"

(3) INF install
for example: XP-SP2
Go to "Control Panel -> Display", select "Setting -> Advanced -> Adapter -> Properties", select "Driver -> Update",
and point to INF's location.

Install and Uninstall Foxconn 761MX AGP Driver.
========================

The SiS AGP driver is installed for AGP bus used by VGA Card.It offer efficient
functions for VGA driver.With installation of AGP driver,it provide high
performance and good compatibility for different hardware.
This package include four parts.
1. Windows XP/Windows 2000/Windows 2003 AGP filter driver: Which can support AGP 8x chipset if chipset and VGA card support.
2. Windows Me/Win98 AGP miniport driver:Which can support AGP 8x chipset if chipset and VGA card support.
3. Some Windows patches:
SIS_LIB.DLL,SISPORT.SYS (winxp) : they are used for reading PCI port.
SiSUSBrg.exe (winxp): Add registry for USB bug under Windows XP
Mp_s3.exe (Windows Me):Patch old SiS 961 FERR bug
Openhci.sys (Win98):Provided by Microsoft to update Win98 USB OHCI
4. Execute ata133.exe for IDE to let IDE support UDMA 133 (XP) and 48bit Capacity of
HD.It also set IDE device to run UDMA as possible.


CONTENTS
***********************
1) System Requirements
2) Windows 2000/Windows XP/Windows 98/Windows Me/Windows 2003 Driver
3) Package Version Identify
4) Silent Install Driver
5) Verifying Installation of the Driver

1) System Requirements

* This package should be installed on the AGP chipset,and others'
chipset will not be supported.

* The SiS AGP Driver supports the following Operation System.

Operation System Version
========================
Windows 2000 2195
Windows XP 5.1.2600.0 or above
Windows Server 2003 5.2.3790.0 or above
Millennium RTM
Windows 98 4.10.1998
========================
2) Windows 2000/Windows XP/Windows 98/Windows Me/Windows 2003 Driver

*************************
Driver Installation for Foxconn 761MX
*************************
Click the SETUP.EXE program and select "Install" button then it will
install the SiS AGP Driver automatically on your Windows system. It
will copy the driver to the \WINNT\SYSTEM32\DRIVERS and set the related
registry tree.


***************************
Driver Foxconn 761MX Uninstallation
***************************
You could remove the SiS AGP Driver by selecting the "Uninstall"
button. It will completely remove the driver from the sytsem.


3) Package Version Identify

The setup program will display the released data and version for this package.

4) Silent Install Driver

Run "setup -s" for Windows XP/WIN2k/98/Me/2003.

5) Verifying Installation of the Driver
For Windows 2000/XP/98/Me/2003:
1. Open "Control Panel".
2. Select "Device Manager" from "Control Panel".
3. Select "System devices" from "Device Manager".
4. Check if the "SiS Accelerated Graphics Port" exist or not.
5. If it is then your installation is successful.

Overview
----------------------------------------
SiS VGA software package consists of VGA drivers, utilities and Installation/Uninstallation programs for Windows 98/Me/2000/XP.
The installation/uninstallation programs are capable of installing/uninstalling VGA drivers and utilities respectively.
ur utilities consist of utility manager, driver mode setting utility, gamma correction utility, video setting utility,
TV output setting utility, center screen for TV, product and file information utility, utility tray, and hotkey define utility.
Objective
----------------------------------------
The objective of this document is to introduce all utilities in our VGA package applications for Windows 98/Me/2000/XP briefly and
give users a common view upon our VGA utilities.
Utility Introduction
----------------------------------------
(1) Utility manager:
It acts as an entrance for users to enter all SiS utilities. Users can move the mouse upon an animation utility button shown in
utility manager and press it to invoke the specified utility dialog.

(2) Driver mode setting:
It provides users to change display state, including driver mode, output device and resolution.

(3) Gamma correction:
It provides users to adjust the screen color TINT, the tint range from blue to red, according the preference of the users.

(4) Video setting:
It provides users to adjust the hue, saturation, contrast, and brightness of video display.

(5) TV output setting:
It provides users to adjust the TV screen position and TV filter.

(6) Center screen for TV:
It provides users to adjust display boundary on TV system.

(7) Product and file information:
It is aimed to list out the product information and the related files information included in the VGA package.

(8) Hotkey define:
It provides friendly ways for users to define hotkeys associated with specified functions of "OSD" or "3D Stereo".
Installation
----------------------------------------
(1) Generic install
Go to the software package directory, double click "setup.exe" icon.

(2) Silence install
Need under the DOS prompt, change directory to the software package path.
Type "setup -s"

(3) INF install
for example: XP-SP2
Go to "Control Panel -> Display", select "Setting -> Advanced -> Adapter -> Properties", select "Driver -> Update",
and point to INF's location.

Overview
----------------------------------------
SiS VGA software package consists of VGA drivers, utilities and Installation/Uninstallation programs for Windows 98/Me/2000/XP.
The installation/uninstallation programs are capable of installing/uninstalling VGA drivers and utilities respectively.
ur utilities consist of utility manager, driver mode setting utility, gamma correction utility, video setting utility,
TV output setting utility, center screen for TV, product and file information utility, utility tray, and hotkey define utility.
Objective
----------------------------------------
The objective of this document is to introduce all utilities in our VGA package applications for Windows 98/Me/2000/XP briefly and
give users a common view upon our VGA utilities.
Utility Introduction
----------------------------------------
(1) Utility manager:
It acts as an entrance for users to enter all SiS utilities. Users can move the mouse upon an animation utility button shown in
utility manager and press it to invoke the specified utility dialog.

(2) Driver mode setting:
It provides users to change display state, including driver mode, output device and resolution.

(3) Gamma correction:
It provides users to adjust the screen color TINT, the tint range from blue to red, according the preference of the users.

(4) Video setting:
It provides users to adjust the hue, saturation, contrast, and brightness of video display.

(5) TV output setting:
It provides users to adjust the TV screen position and TV filter.

(6) Center screen for TV:
It provides users to adjust display boundary on TV system.

(7) Product and file information:
It is aimed to list out the product information and the related files information included in the VGA package.

(8) Hotkey define:
It provides friendly ways for users to define hotkeys associated with specified functions of "OSD" or "3D Stereo".
Installation
----------------------------------------
(1) Generic install
Go to the software package directory, double click "setup.exe" icon.

(2) Silence install
Need under the DOS prompt, change directory to the software package path.
Type "setup -s"

(3) INF install
for example: XP-SP2
Go to "Control Panel -> Display", select "Setting -> Advanced -> Adapter -> Properties", select "Driver -> Update",
and point to INF's location.

SiS Chipset Driver

Main Features
Specifications. 2
Jumpers .
BIOS Description
Enter BIOS Setup . 21
Main menu. 21
1.Standard CMOS Features. 22
2.Fox Central Control Unit . 24
3.Advanced BIOS Features . 24
4.Advanced Chipset Features . 26
5.Integrated Peripherals . 27
6.Power Management Setup . 27
7.PnP/PCI Configuration . 28
8. PC Health Status . 29
9.Load Fail-Safe Defaults . 30
10.Load Optimized Defaults . 30
11.Set SuperVisor Password . 30
12.Save & Exit Setup . 31
13.Exit Without Saving . 31
Directions for Bundled Software

FOX ONE. 33
FOX LiveUpdate . 36
FOX LOGO. 38
FOX DMI . 39