Foxconn RC4107MA-8KRS2H Download Drivers, Manual and BIOS

1.Change DDR2 533MHZ MeM’S default value of address_stepping to 2t. 2.Patch that after reboot with flash fail the system halt at ‘c3’. 3.Adjust intrude function follow VE’s request. 4.Adjust memory over volt timing follow hardware’s request.

1, Decrease 3 degrees of temperature show value when fixed with 356/571/672 CPU

1. Patch for the string of 'em64t' overlap with the string of 'HT.'. 2. Patch for 266mhz show 265mhz.

On board chipset drivers Version

REALTEK RTL Gigabit and Fast Ethernet NIC Driver Setup Utility for Foxconn RC4107MA-8KRS2H
for Windows Me/2000/XP NDIS Driver

======================

How to use this RTLSetup Utility
----------------------------------------
Install Foxconn RC4107MA-8KRS2H in Windows Me:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

Install Foxconn RC4107MA-8KRS2H in Windows 2000 and XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

On board chipset drivers for 32 bit

Realtek Semiconductor Corp. AC'97 Sound System Software ver:A3.79
Installation and Setup for RC4107MA-8KRS2H
Driver and Application Installation/Removal Procedure For Realtek AC'97 Codec:
======================================

For Windows 2000/Windows Me/Windows XP /Win98 Gold(First Edition)/Win98SE

----------------------------------------
Setup Audio Driver and Application for Foxconn RC4107MA-8KRS2H at first time:
----------------------------------------

Step 1. Before installing the Realtek AC'97 Drivers & Applications, Press the
[Cancel] button if Windows detect the PCI Multimedia Audio device.

Step 2. Insert the "Realtek AC'97 Drivers & Applications" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

----------------------------------------
Installation Manual Foxconn RC4107MA-8KRS2H
----------------------------------------
1. Double-click the "System" icon to open the "System Properties" dialog from Control Panel .
2. Choose "Hardware" tab and click the "Device Manager" button .
3. Please right-click mouse on "MultiMedia Audio Controller" and choose the "Properties" menu item
to show the driver details.
4. Click the "Driver" tab and then click the "Update Driver." button for update.
5. Please follow the instructions of the "Upgrade Device Driver Wizard".
6. Choose "Search for a suitable driver for my device" and click the "Next" button.
7. Please specify the driver location/source and then click the "Next" button in this case,
"Specify a location" has been chosen.
8. If "Specify driver location" is chosen, the Wizard will ask for the path where the driver is located.
9. Click the "Next" button to install Audio Driver on "Driver Files Search Results".
10. If the "Digital Signature Not Found" dialog is opened, click the "Yes" button to continue
the Installation.
11. After completing the above steps, the drier has been installed into the system.
Please click "Finish" button to complete the installation.

----------------------------------------
Update Foxconn RC4107MA-8KRS2H Driver and Application:
----------------------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

----------------------------------------
Remove Foxconn RC4107MA-8KRS2H Driver and Application:
----------------------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek AC'97 Audio" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation for RC4107MA-8KRS2H Audio Driver.
For Windows NT4.0 driver

----------------------------------------
Setup Audio Driver and Application for Foxconn RC4107MA-8KRS2H at first time:
----------------------------------------

Ignore Step 1, and follow the same procedure in Windows 2000/Windows Me/Windows XP.

----------------------------------------
Update Foxconn RC4107MA-8KRS2H Driver and Application:
----------------------------------------

The same procedure in Windows 2000/Windows Me/Windows XP.

----------------------------------------
Remove Foxconn RC4107MA-8KRS2H Driver and Application:
----------------------------------------

The same procedure in Windows 2000/Windows Me/Windows XP.

<< Other Informations >>

----------------------------------------
Silent Installation:
----------------------------------------

Run "Setup -s -f2"
i.e. setup -s -f2c:\mylog.log
Note: 1. AVRack only works fine under WinNT 4.0 after installing
Service Pick 3 or later.
2. Please update Directx version to DirectX8.0 or above.

----------------------------------------
Version Informations:
----------------------------------------

WDM driver for Win98/WinMe/Windows 2000/Windows XP : 5.10.0.5950
WDM driver for Windows x64 : 5.10.0.5950
VXD driver for Win95 : 4.5.0.3019
VXD Software wavetable driver : 3.1.0.0
NT4 driver for Windows NT4 : 4.3.0.3040
NT4 software wavetable driver : 4.3.0.2002

RtlRack for Win98/Me/2000/XP : 1.11.0.0
AvRack for Win95/NT4 : 2003.4.4.1

Realtek Soundman : 5.1.0.46
Realtek Sound Effect Manager(CPL) : 2.2.0.51
Realtek Sound Effect Manager(RtlCpl) : 1.0.1.53
Realtek Sound Effect Manager for NT4 : 2.3.0.3

Driver/Application Setup Program : 5.18

Chapter 1 Foxconn RC4107MA-8KRS2H Product Introduction
Main Features . 2
Motherboard Layout . 4
Rear Panel Connectors . 5
Chapter 2 Foxconn RC4107MA-8KRS2H Installation Instructions
CPU. 8
Memory . 11
Power Supply . 13
Other Connectors . 14
Expansion Slots . 18
Jumpers . 19

Chapter 3 Foxconn RC4107MA-8KRS2H BIOS Description

Enter BIOS Setup . 23
Main Menu . 23
Standard CMOS Features . 25
BIOS Features . 28
Advanced BIOS Features . 29
Advanced Chipset Features . 33
Integrated Peripherals . 37
Power Management Setup . 41
PnP/PCI Configurations . 45
PC Health Status . 46
Frequency/Voltage Control . 47
Load Fail-Safe Defaults . 48
Load Optimized Defaults . 48
Set Supervisor/User Password . 48
Save & Exit Setup. 49
Exit Without Saving. 49

Chapter 4 Foxconn RC4107MA-8KRS2H Driver CD Introduction

Utility CD content . 51
Start to install drivers. 52

Chapter 5 Foxconn RC4107MA-8KRS2H Directions for Bundled Software

SuperStep. 54
SuperUpdate . 57
SuperLogo . 62
Chapter 6 Foxconn RC4107MA-8KRS2H Special BIOS Functions

SuperBoot . 65
SuperBIOS-Protect . 66
SuperSpeed . 67
SuperRecovery . 68