Foxconn P4M800P7MB-RS2H Download Drivers, Manual and BIOS

Change BIOS edition only.(P4M800P7MB-RS2H support Vista ready)

1.Fixed Usb & PS2 KB will hang the system if connect together. 2.Fix use 0F64H & 0F65H cpu temperature too low in setup 3.Update BIOSID

1.Modify to follow dimm buffer re-change form(datacode 5473 ) to (datacode 6185).

1.re-Modify DIMM buffer configuration to follow realtek recommend.

1.update osb logo . 2.update macro code (0F64H,0F65H). 3.Fix turn power off screen disorderliness issue. 4.Fix The temp in os is deffrent from in setup. 5.Fix the temp back from S1,S3,S4,is not same as before

VIA 8237 SouthBridge RAID Driver 1.Correct wrong version sting showed at setup program

REALTEK RTL Gigabit and Fast Ethernet NIC Driver Setup Utility for Foxconn P4M800P7MB-RS2H
Windows Me/2000/XP NDIS Driver

======================

How to use this RTLSetup Utility
----------------------------------------
Install Foxconn P4M800P7MB-RS2H in Windows Me:

1. If the Operating System's New Hardware Wizard prompts you that
"New Hardware Found" for the "PCI Ethernet Controller", you should
click "Next" until "Finish" is clicked and without specifying
location of the driver. You will see the "PCI Ethernet Controller"
in the Device Manager.

2. Then you can install or update the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

You need to reboot the system immediately after the Install shield
completes the installation/upgrade.

3. Do not click "Cancel" during New Hardware Wizard searches for the
driver.

4. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately.

Install Foxconn P4M800P7MB-RS2H in Windows 2000 and XP:

1. If the Operating System's Found New Hardware Wizard prompts you that
"New Hardware Found" for the "Ethernet Controller", you should click
"Next" until "Finish" is clicked and without specifying location of
the driver. You will see the "Ethernet Controller" in the Device
Manager.

2. Then you can install or upgrade the NDIS driver with "setup" or
"setup -s" command:
a) setup: The InstallShield will prompt you the steps to install
or upgrade the driver.

b) setup -s: The InstallShield will complete the installation or
upgrade without prompting you any instruction.

3. You can remove RTLSetup utility from Add/Remove Program Palette in
Control Panel, the InstallShield will prompt you the steps to remove
the driver. After remove the driver, please restart the system
immediately if you want your networking to be re-installed.

* USB2.0 installation guide
*
*******************************************************************************

For Windows 2000
=====================
1.First,you must install Windows 2000 SERVICE PACK 4 or above.
2.Right-click "My Computer" icon, select "Properties".
3.Select the "Hardware" tab, and click the "Device Manager" button.
4.Right-click on the "Universal Serial Bus(USB) Controller" and select "Properties".
5.Click the "Driver" tab and click the "Update Driver" button then click "Next" twice.
6.Select "Microsoft Windows Update" and click "Next".
7.Do as the system prompted to finish and restart.
For Windows XP
=====================
1.First,you must install Windows XP SERVICE PACK 1 or above.
2.Right-click "My Computer" icon, select "Properties".
3.Select the "Hardware" tab, and click the "Device Manager" button.
4.Right-click on the "Universal Serial Bus(USB) Controller" and select "Properties".
5.Click the "Driver" tab and click the "Update Driver" button then click "Next".
6.Select "Search for a suitable driver for my device(recommended)" and click "Next".
7.Do as the system prompted to finish.

VIA Chipset drivers for 32 bit

VGA drivers for 32 bit

Audio Drivers for 32bit

Audio driver for Vista ready

Chapter 1 Foxconn P4M800P7MB-RS2H Product Introduction
Main Features . 2
Motherboard Layout . 4
Rear Panel Connectors . 5
Chapter 2 Foxconn P4M800P7MB-RS2H Installation Instructions
CPU. 8
Memory . 11
Power Supply . 13
Other Connectors . 14
Expansion Slots . 18
Jumpers . 19

Chapter 3 Foxconn P4M800P7MB-RS2H BIOS Description

Enter BIOS Setup . 23
Main Menu . 23
Standard CMOS Features . 25
BIOS Features . 28
Advanced BIOS Features . 29
Advanced Chipset Features . 33
Integrated Peripherals . 37
Power Management Setup . 41
PnP/PCI Configurations . 45
PC Health Status . 46
Frequency/Voltage Control . 47
Load Fail-Safe Defaults . 48
Load Optimized Defaults . 48
Set Supervisor/User Password . 48
Save & Exit Setup. 49
Exit Without Saving. 49

Chapter 4 Foxconn P4M800P7MB-RS2H Driver CD Introduction

Utility CD content . 51
Start to install drivers. 52

Chapter 5 Foxconn P4M800P7MB-RS2H Directions for Bundled Software

SuperStep. 54
SuperUpdate . 57
SuperLogo . 62
Chapter 6 Foxconn P4M800P7MB-RS2H Special BIOS Functions

SuperBoot . 65
SuperBIOS-Protect . 66
SuperSpeed . 67
SuperRecovery . 68