Biostar P4M890-M7 FE 7.x Download Drivers, Utilities, Manual and BIOS

Available 16 files for P4M890-M7 FE 7.x
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
BIOS
Operating Systems
BIOS
Version BIOS
2008-05-14
Size BIOS
512Kb
File Name
p4m9m411.bsc
Date
2008-05-14
Information
Initial BIOS With Biostar logo.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
Manual
Operating Systems
Manual
Size Manual
2.5Mb
File Name
p4m90-m7c_p4m89-m7c_080407_bq.zip
Information
Table of Contents
Chapter 1: Introduction.....................................................3
1.1 Before You Start................................................................... 3
1.2 Package Checklist................................................................ 3
1.3 Motherboard Features.......................................................... 4
1.4 Rear Panel Connectors.......................................................... 5
1.5 Motherboard Layout ............................................................ 6
Chapter 2: Hardware Installation........................................7
2.1 Installing Central Processing Unit (CPU)................................ 7
2.2 Fan Headers......................................................................... 9
2.3 Installing System Memory.....................................................10
2.4 Connectors and Slots ............................................................12
Chapter 3: Headers & Jumpers Setup.................................14
3.1 How to Setup Jumpers..........................................................14
3.2 Detail Settings.....................................................................14
Chapter 4: RAID Functions...............................................20
4.1 Operation System................................................................20
4.2 Raid Arrays.........................................................................20
4.3 How RAID Works.................................................................20
Chapter 5: Useful Help.....................................................22
5.1 Driver Installation Note .......................................................22
5.2 Award BIOS Beep Code........................................................23
5.3 Extra Information................................................................23
5.4 Troubleshooting...................................................................24
Appendencies: SPEC In Other Language.............................26
German................................................................................................26
France..................................................................................................28
Italian..................................................................................................30
Spanish................................................................................................32
Portuguese...........................................................................................34
Polish...................................................................................................36
Russian................................................................................................38
Arabic..................................................................................................40
Japanese ..............................................................................................42
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
Manual PDF
Operating Systems
Manual PDF
Size Manual
418Kb
File Name
bios_update.pdf
Information
BIOS Update
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
under Windows system.
Update BIOS
with a BIOS file
Clear CMOS function
(Only for AWARD BIOS)
Show current BIOS information
Save current BIOS
to a .bin file
AWARD BIOS AMI BIOS
Online Update function
(Only for AMI BIOS)

Once click on this button, the
saving dialog will show.
Choose the position to save file
and enter file name. (We
recommend that the file name
should be English/number and
no longer than 7 characters.)
Then click Save.
After the saving process, finish
dialog will show. Click on OK to
complete the BIOS Backup
procedure.

Before doing this, please download the proper BIOS file from the website.
For AWARD BIOS, update BIOS procedure
should be run with Clear CMOS function, so
please check on Clear CMOS first.
Then click Update BIOS button, a
dialog will show for asking you backup
current BIOS. Click Yes for BIOS
backup and refer to the Backup BIOS
procedure; or click No to skip this
procedure.
After the BIOS Backup procedure, the
open dialog will show for requesting the
BIOS file which is going to be updated.
Please choose the proper BIOS file for
updating, then click on Open.
The utility will update BIOS with the
proper BIOS file, and this process may
take minutes. Please do not open any
other applications during this process.
After the BIOS Update process, click
on OK to restart the system.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. BIOS Update is completed.
(for AMI BIOS only)
Automatically download and update the latest BIOS via internet; make sure that
the computer is connected to the internet before using this function.
After clicking on the Online Update
button, the utility will search for the
latest BIOS from internet. If there is
a new BIOS version, the utility will
ask you to download it. Click Yes to
proceed.
If there is no other newer BIOS
version, the utility will also tell you that
your BIOS has been the latest version.
Download completes; the utility will
ask you to program (update) the
BIOS. Click Yes to proceed.
The programming procedure may take minutes, please do not make any
operation during the programming process.
After the updating process, the utility will
ask you to reboot the system. Click OK
to reboot.
While the system boots up and the full screen logo shows, press
key to enter BIOS setup.
In the BIOS setup, use the Load Optimized Defaults function and then Save and
Exit Setup to exit BIOS setup. Online Update is completed.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
USB 2.0 Controller
Operating Systems
Windows 2000-XP 32bits
Version Driver
0.9.0.5
Size Driver
318Kb
File Name
setup.exe
Date
2009-03-06
Information
Summary:
- Gold Release Update for the Broadcom 5751, 5751m 7.5 Project.
- Added Windows 2000 cat file, and Windows NT driver.
- Added 5702, 5705, and 5788 bootcode.

Software Compatibility
======================

This release of software supports:
- Broadcom 5751 Gigabit Ethernet with A0, A1 step silicon

Contents of the CD
==================
*** Release Version Information Table ***

Product Version Previous Rel.

Windows Driver - WinNT 7.73 n/a
Windows Driver - Win2k 7.73* 7.73
Windows Driver - WinXP 7.73* 7.73*
DOS NDIS2 Driver 7.61 7.61
Linux Driver 7.2.24 7.2.24
Netware ODI32 Driver 7.57 7.57
Netware ODI16 Driver 7.61 7.61
DOS Diagnostics 7.27 7.27
PXE 7.5.14 7.5.14
Bootcode for 5702 3.37 n/a
Bootcode for 5705 3.18 n/a
Bootcode for 5751 3.23 3.23
Bootcode for 5751m 3.23 3.23
Bootcode for 5788 3.04 n/a
BACS 7.5.2 7.5.2
BMAPI 6.4.9 6.4.9
CABW32 6.1.3 6.1.3
User Guide 4.05.03 4.05.03
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board Audio
Operating Systems
Windows 2000-XP 32bits-XP 64bits-2003 32bits-2003 64bits
Version Driver
5.10.0.5735
Size Driver
28.3Mb
File Name
wdm_r209.exe
Date
2008-12-08
Information
Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Windows 2000/XP/Vista x86/x64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
BIOS Utility
Operating Systems
Windows 2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits-XP MCE
Version Utilities
1.9.2.3
Size Utilities
3.5Mb
File Name
bios.zip
Date
2009-02-20
Information
BIOS Update is a convenient utility which allows you to update your motherboard BIOS
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board VGA
Operating Systems
Windows 2000-XP-2003 32bits
Version Driver
6.14.10.0359
Size Driver
6.7Mb
File Name
win2kxp.exe
Date
2007-12-05
Information
Installation instructions
-------------------------
1. These drivers must be installed by a user with Windows 2000/XP Administrator
privileges. Please consult your system administrator or Microsoft
Windows 2000/XP User's Manual for more information on Administrator
privileges.

2. Start Microsoft Windows 2000/XP.

3. From the Start menu, select Settings.

4. Select Control Panel.

5. Select System.

6. Select Device Manager.

7. Under Display adapters, select the name of the NVIDIA adapter you have
installed. If you do not see a Display adapters option, or if your NVIDIA
adapter is not listed, under Other Devices, select Video Controller (VGA
Compatible).

8. Select the Driver tab.

9. Select Update Driver.

10. Select Next.

11. Select Next.

12. Verify that "Specify a location" has a check mark next to it. If it does
not, click in the box next to "Specify a location" to place a check mark
in the box. Select Next.

13. Enter the path to the NVIDIA drivers in the "Copy manufacturer's files
from:" dialog. Select OK.

14. If you get a dialog box that states "A suitable driver for this device
is already installed.", click in the box next to "Install one of the
other drivers" to place a check mark in the box, then select Next.

Otherwise, select Next, then proceed to step 16.

15. Select the following driver from the list. NVIDIA RIVA TNT is used an
example; make sure to select your NVIDIA adapter from the list.

Description Provider Manufacturer Location
----------- -------- ------------ --------
NVIDIA RIVA TNT NVIDIA NVIDIA a:\nv4_disp.inf

Select Next.

16. Select Finish.

17. Select Close.

18. Windows 2000/XP will ask if you wish to restart the computer.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board LAN
Operating Systems
Windows 2000-XP-2003 32bits
Version Driver
3.67.0.452
Size Driver
509Kb
File Name
xp32.zip
Date
2007-12-05
Information
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board VGA
Operating Systems
Windows 95-98-Me
Version Driver
4.14.10.0067
Size Driver
7.7Mb
File Name
win9xme.exe
Date
2007-12-05
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
Chipset
Operating Systems
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Version Driver
V5.21A
Size Driver
12.7Mb
File Name
via_hyperionpro_v521a.zip
Date
2009-03-06
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
Serial ATA RAID
Operating Systems
Windows 98-Me-2000-XP 32bits-XP 64bits-Vista 32bits-Vista 64bits-2003 32bits-2003 64bits
Version Driver
5.1.6000.581
Size Driver
428Kb
File Name
drvdisk.exe
Date
2009-03-06
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board LAN
Operating Systems
Windows Vista 32bits
Version Driver
3.67.0.452
Size Driver
431Kb
File Name
vista32.zip
Date
2007-12-05
Information
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================

FETND5AV.SYS The NDIS5 driver for Windows 98/98SE/ME.
FETND5BV.SYS The NDIS5 driver for Windows 2000/XP/SRV2003/Vista.
FETND4.SYS The NDIS4 driver for Windows 95OSR2.
FETND3.SYS The NDIS3 driver for Windows 95.
FETND.DOS The NDIS2 driver for Windows.
FETODI.COM The ODI driver for Windows.
FETNDIS.INF The installation information file.
WINNDI.DLL The Co-installer for Windows.
VUINS16.DLL The Un-installer for Windows.
VUINS32.DLL The Un-installer for Windows 2K/XP/SRV2003.
DIFXAPI.DLL The DIFx API for Vista.
WIN.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.

3. When the driver installation is completed, restart Windows.
Note:

1. The NDIS2 and ODI drivers are only supported in Windows 95.

2. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board Audio
Operating Systems
Windows Vista 32bits-Vista 64bits
Version Driver
6.0.1.5735
Size Driver
25.9Mb
File Name
vista_r209.exe
Date
2008-12-08
Information
Driver Installation/Removal Procedure For Realtek High Definition Audio Codec:
=================================================================================

<<< For Windows 2000/XP/Vista x86/x64 (WDM driver) >>>

---------------------------------------
Setup Driver at first time:
---------------------------------------

Step 1. Before installing the Realtek HD Audio Drivers, Press the
[Cancel] button if Windows detect the Multimedia Audio device.

Step 2. Insert the "Realtek HD Audio Drivers" CD into the CD-ROM
drive and run the setup.exe program to finish the installation.

Step 3. Click on [Next/OK/Go] to continue the procedure. If the Windows popup
"Digital Signature Not Found" message, press [Yes] to continue the
installation.

Step 4. Finally, select to restart the system and press [Finish] to complete
the installation.

The system will reload the drivers and do some adjustments in the INF
file if so required.

--------------------------
Update Driver:
--------------------------

Step 1. Follow Step 2,3,4 described in [Setup at first time] above to complete
the procedure.

--------------------------
Remove Driver:
--------------------------

Step 1. Go to Start\Settings\Control Panel.

Step 2. Select [Add/Remove Programs] icon.

Step 3. Select "Realtek HD Audio Drivers" and press [Change/Remove]
button.

Step 4. Click on [Next/OK/Go] to finish the uninstallation.

Step 5. At the end of the procedure, select to restart the system and press
[Finish] to complete the uninstallation.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board LAN
Operating Systems
Windows Vista 64bits
Version Driver
3.67.0.452
Size Driver
480Kb
File Name
vista64.zip
Date
2007-12-05
Information
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================


FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:

1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board VGA
Operating Systems
Windows XP 64bits-2003 64bits
Version Driver
6.14.10.6007
Size Driver
7.4Mb
File Name
winxp_64.exe
Date
2007-12-05
Company
Biostar
Categories
Motherboards
Model
Biostar P4M890-M7 FE 7.x
Description
On-Board LAN
Operating Systems
Windows XP 64bits-2003 64bits
Version Driver
3.67.0.452
Size Driver
446Kb
File Name
xp64.zip
Date
2007-12-05
Information
This document shows you how to setup the driver in Windows operating system.

Contents of the Subdirectory:
=============================


FET5A64B.SYS The NDIS5 driver for WinXP/Server2003 x64 Edition for AMD64.
FETNDA64.INF The installation information file.
VUINS64.DLL The Un-installer for WinXP/Server2003 x64 Edition for AMD64.
DIFXAPI.DLL The DIFx API for Windows Vista x64 Edition for AMD64.
WINX64.TXT This file.

Installation:
=============

Before starting with the installation process, make sure that the adapter
is properly installed and configured.

1. Turn on the power of your PC on to boot from Windows operating system.
Windows will auto-detect your new adapter, and the "New Hardware Found"
dialogue box will appear. Select "Driver from disk provided by hardware
manufacturer" to install driver from the diskette that comes with your
LAN adapter.

2. Insert the driver diskette into your floppy drive, and specify the
path of the driver in the diskette(i.e. A:\) to copy the driver
files to your system.
Note:

1. In Setup Option "Flow Control":
When setting to Hardware Default(Auto), the flow control setting is
according to the auto-negotiation result based on PHY hardware default
values. However, when setting to other values(Disable, Enable), driver
will just disable or enable flow control ability according to your setting.
HelpDrivers Since March 2000