Micronet SP3000US Fax & Modem & ISDN

Company

Micronet

Categories

Fax & Modem & ISDN

Model

Micronet SP3000US

Description

Drivers

Operating System

Windows 2000

Size Driver

1.7MB

File Name

sp3000us_win2k.zip

Observations

This document contains release notes and other information about this
product. Information in this document is the most current available.
For your convenience, print a copy of this file and keep it with your
user manual.

------------------------
How to Use This Document
------------------------
To view README.TXT on screen in Windows Notepad, maximize the Notepad window.

To print README.TXT, open it in Windows Write, Microsoft Word, or another
word processor. Then select the entire document and format the text in
10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Known issues
7) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of Pegas.usB was tested only with Microsoft Windows 2000
Professional.

2) If Pegas.usB is already installed in your system and you want to re-install
new version, first uninstall Pegas.usB (See Uninstall Procedure), and only
then proceed to install new version.
To install Pegas.usB for the first time:
-------------------------------------------
a) Plug in the Pegas.usB modem into a USB port.
b) Windows will instantly detect the USB modem will start software installation.
c) When requested, point to the Pegas.usB install diskette in the floppy drive or
CD-ROM drive.
d) Pegas.usB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that Pegas.usB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that Pegas.usB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then Pegas.usB has been successfully
installed.

Company

Micronet

Categories

Fax & Modem & ISDN

Model

Micronet SP3000US

Description

Drivers

Operating System

Windows 98

Size Driver

1.6MB

File Name

sp3000us_win98.zip

Observations

[Version]
CatalogFile="mdmslusb.cat"
Signature="$CHICAGO$"
Class=USB
ClassGUID={36FC9E60-C465-11CF-8056-444553540000}
provider=%MSFT%
LayoutFile=layout.inf
DriverVer=06/22/2000,Ver2.79.08

[Manufacturer]
%MfgName%=Model

[Model]
%DeviceDesc%=Main, USB\VID_0483&PID_7554

[PreCopySection]
HKR,,NoSetupUI,,1

[DestinationDirs]
Main.CopyList = 11
Inf.Copy = 17, other
Modem.Copy = 11
App.Copy = 10
Uninst.Copy = 10, Modio\%SmartLink_Signature%
USBPatch.Copy = 10, System32\Drivers
WinDB.Del = 17

[Main]
CopyFiles=Main.CopyList,Inf.Copy,Modem.Copy,App.Copy,Uninst.Copy,USBPatch.Copy
DelFiles=WinDB.Del
AddReg=Main.AddReg

[Main.AddReg]
HKR,,DevLoader,,"slv7554.vxd,*ntkern"
HKR,,NTMPDriver,,slnt7554.sys
HKR,,EnumPropPages,,"slusbcfg.dll,EnumPropPages"
HKR,,Alt,1,01,00,00,00
;HKR,,Offset,1,FA,00,00,00
HKR,,Debug.Delay,1,60,00,00,00
HKR,,Debug.DoNotSwap,1,01,00,00,00
HKR,,Debug.SoftDSP,1,01,00,00,00
HKR,,Debug.AddDelay,1,1E,00,00,00
HKR,,Debug.RedDelay,1,14,00,00,00
HKR,,SLSignature,0,%SmartLink_Signature%
HKR,Modem,RateIn,1,80,25,00,00
HKR,Modem,RateOut,1,80,25,00,00
HKR,,Options.Buzzer,1,01,00,00,00
HKR,,Options.ExtraLeds,1,01,00,00,00
HKR,,Options.International,1,01,00,00,00
HKLM,ENUM\ISAPNP\SML7554\FFFF,"",,""
HKLM, SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%SmartLink_Signature%, UninstallString, 0, %10%\Modio\%SmartLink_Signature%\slclean.exe
HKLM, SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%SmartLink_Signature%, DisplayName, 0, "Uninstall USB V.90 FAX MODEM"
HKLM, SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%SmartLink_Signature%, SLDlgTitle, 0, "Uninstall USB V.90 FAX MODEM"
HKLM, SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%SmartLink_Signature%, SLDlgText, 0, "You are going to Uninstall all the USB V.90 FAX MODEM drivers."
HKLM, SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%SmartLink_Signature%, DelModioDir, 1, 01, 00, 00, 00

[SourceDisksNames]
1=%InstallDiskTitle1%,,0000-0000

[SourceDisksFiles]
slv7554.vx_=1
slnt7554.sy_=1
slusbcfg.dll=1
mtlport.vx_=1
mtlmdm.vx_=1
mtlfax.vx_=1
mtlstrm.vx_=1
mtlhal.vx_=1
slld.vx_=1
v90drv.vx_=1
slcpappl.cp_=1
mdmslusb.inf=1
serwsl.inf=1

Company

Micronet

Categories

Fax & Modem & ISDN

Model

Micronet SP3000US

Description

Drivers

Operating System

Windows Me

Size Driver

1.6MB

File Name

sp3000us_winme.zip

Observations

Company

Micronet

Categories

Fax & Modem & ISDN

Model

Micronet SP3000US

Description

Drivers

Operating System

Windows XP

Size Driver

2.3MB

File Name

sp3000us_winxp.zip

Observations

This document contains release notes and other information about
this product. Information in this document is the most current
available. For your convenience, print a copy of this file and
keep it with your user manual.

------------------------
How to Use This Document
------------------------
To view README.TXT on screen in Windows Notepad, maximize the
Notepad window.

To print README.TXT, open it in Windows Write, Microsoft Word,
or another word processor. Then select the entire document
and format the text in 10-point Courier before printing.

This file (README.TXT) contains:

--------
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Call Progress Sounds
7) Known issues
8) Troubleshooting
9) Disclaimers

--------------
1. Quick Start
--------------

1) This version of SmartUSB56 drivers is only compatible with
Microsoft Windows XP and Windows 2000.

2) If any type of Smart Link modem is already installed in your
system and you want to update its' device driver, first
uninstall existing drivers (See Uninstall Procedure), and only
then proceed to install the new drivers.
To install your modem drivers for the first time:
-------------------------------------------------
a) Plug in the modem into a USB port.

b) Windows will instantly detect the modem and will start software
installation.

c) When requested, point to the drivers installtion directory on
the floppy disk or CD-ROM.

d) Modem drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that the modem is installed correctly, follow these steps:

a) Click "Start > Settings > Control Panel > Modem": check for the
presence of a "SmartUSB56 Modem".

b) In "Control Panel > Modems > Properties > Diagnostics" click on
"Query Modem" button and check that the modem responds.

To Check that the modem is working properly:

a) Open "Hyper Terminal".
b) Select the "SmartUSB56 Modem" or "Direct to port" option.
c) Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.

Access to Official Website Micronet

Home English Drivers English

Welcome to the HelpDrivers, driver for printers.

Original files: In HelpDrivers, all drivers, manuals, BIOS, etc. are those originally provided by the official manufacturers. Click here to learn more

You can download by either clicking the 'Download' button. From the File Download window, verify that "Save" is selected and click OK.

Do not rename the file you're downloading, it may cause installation problems.

Available 4 files for Micronet SP3000US

Select Files