Mac System USB560ST USB Download Drivers

Available 4 files for USB560ST USB
Company
Mac System
Categories
Fax & Modem & ISDN
Model
Mac System USB560ST USB
Description
Drivers
Operating Systems
Windows 2000
Size Driver
1.5Mb
File Name
usb560st_win2k_2r75.zip
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Known issues
6) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of Pegas.USB is compatible only with Microsoft Windows 98.

2) If Pegas.USB is already installed in your system and you want to re-install
new version, first uninstall Pegas.USB (See Uninstall Procedure), and only
then proceed to install new version.
To install Pegas.USB for the first time:
-------------------------------------------
a) Plug in the Pegas.USB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the Pegas.USB install diskette in the floppy drive or
CD-ROM drive.
d) Pegas.USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that Pegas.USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that Pegas.USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then Pegas.USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Open "Control Panel > Modems" folder and choose "Pegas.USB Modem".
b) Click the "Remove" button.
c) Open "Control Panel > Add/Remove Programs" folder
and choose "Uninstall Pegas.USB Modem".
d) Click the "Add/Remove" button.
e) Pegas.USB drivers will be uninstalled.
f) You may un-plug the Pegas.USB from the USB port.

-------------------
4. Update Procedure
-------------------

To update your Pegas.USB drivers, uninstall previous drivers (see above
procedure) and RESTART your system.
Company
Mac System
Categories
Fax & Modem & ISDN
Model
Mac System USB560ST USB
Description
Drivers
Operating Systems
Windows 95 osr2-98-98Se
Size Driver
1.5Mb
File Name
usb560st_win9x_2r75.zip
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Known issues
6) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of Pegas.USB is compatible only with Microsoft Windows 98.

2) If Pegas.USB is already installed in your system and you want to re-install
new version, first uninstall Pegas.USB (See Uninstall Procedure), and only
then proceed to install new version.
To install Pegas.USB for the first time:
-------------------------------------------
a) Plug in the Pegas.USB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the Pegas.USB install diskette in the floppy drive or
CD-ROM drive.
d) Pegas.USB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that Pegas.USB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that Pegas.USB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then Pegas.USB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall Pegas.USB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) Pegas.USB drivers will be uninstalled.
f) You may un-plug the Pegas.USB from the USB port.

-------------------
4. Update Procedure
-------------------

To update your Pegas.USB drivers, uninstall previous drivers (see above
procedure) and RESTART your system.
Company
Mac System
Categories
Fax & Modem & ISDN
Model
Mac System USB560ST USB
Description
Drivers
Operating Systems
Windows Me
Size Driver
1.8Mb
File Name
usbme.zip
Info
Contents
--------
1) Quick Start
2) How to verify installation
3) Uninstall procedure
4) Update procedure
5) Country selection
6) Known issues
7) Troubleshooting
--------------
1. Quick Start
--------------

Important notes:

1) This version of Pegas.usB is compatible only with Microsoft Windows 98.

2) If Pegas.usB is already installed in your system and you want to re-install
new version, first uninstall Pegas.usB (See Uninstall Procedure), and only
then proceed to install new version.
To install Pegas.usB for the first time:
-------------------------------------------
a) Plug in the Pegas.usB modem into a USB port.
b) Windows98 will instantly detect the USB modem will start software installation.
c) When requested, point to the Pegas.usB install diskette in the floppy drive or
CD-ROM drive.
d) Pegas.usB drivers will be installed.
-----------------------------
2. How to verify installation
-----------------------------

To verify that Pegas.usB is installed correctly, follow these steps:

a) In Control Panel - Modems: check for the presence of your USB modem.
To Check that Pegas.usB is working properly:

a) Create a configuration (Direct to port or modem) of Hyper Terminal.

b) Run Hyper Terminal.
Type ATI1, ATI2 or ATI3 and make sure you receive the modem IDs.
Dial any accessible phone number, and see that that phone rings.
Dial to another modem (ATDTxxx or via the dial button of the TAPI
interface) and see that a modem session is established.

If you have successfully connected, then Pegas.usB has been successfully
installed.
----------------------
3. Uninstall Procedure
----------------------
a) Go to Control Panel / Add/Remove Programs
b) Select "Uninstall Pegas.usB Modem"
c) Click on Add/Remove Button
d) A confirmation window appears. Click "OK" to proceed.
e) Pegas.usB drivers will be uninstalled.
f) You may un-plug the Pegas.usB from the USB port.

-------------------
4. Update Procedure
-------------------

To update your Pegas.usB drivers, uninstall previous drivers (see above
procedure) and RESTART your system.
Company
Mac System
Categories
Fax & Modem & ISDN
Model
Mac System USB560ST USB
Description
Drivers
Operating Systems
Windows XP
Size Driver
2.7Mb
File Name
usb-win2k-xp.exe
HelpDrivers Since March 2000